[Docs] [txt|pdf|xml|html] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits] [IPR]

Versions: (draft-kwatsen-netconf-zerotouch) 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20

NETCONF Working Group                                          K. Watsen
Internet-Draft                                          Juniper Networks
Intended status: Standards Track                          M. Abrahamsson
Expires: August 31, 2018                                       T-Systems
                                                               I. Farrer
                                                     Deutsche Telekom AG
                                                       February 27, 2018


             Zero Touch Provisioning for Networking Devices
                    draft-ietf-netconf-zerotouch-20

Abstract

   This draft presents a technique to securely provision a networking
   device when it is booting in a factory-default state.  Variations in
   the solution enables it to be used on both public and private
   networks.  The provisioning steps are able to update the boot image,
   commit an initial configuration, and execute arbitrary scripts to
   address auxiliary needs.  The updated device is subsequently able to
   establish secure connections with other systems.  For instance, a
   device may establish NETCONF [RFC6241] and/or RESTCONF [RFC8040]
   connections with deployment-specific network management systems.

Editorial Note (To be removed by RFC Editor)

   This draft contains many placeholder values that need to be replaced
   with finalized values at the time of publication.  This note
   summarizes all of the substitutions that are needed.  No other RFC
   Editor instructions are specified elsewhere in this document.

   Artwork in the IANA Considerations section contains placeholder
   values for DHCP options pending IANA assignment.  Please apply the
   following replacements:

   o  "TBD1" --> the assigned value for id-ct-zerotouchInformationXML

   o  "TBD2" --> the assigned value for id-ct-zerotouchInformationJSON

   Artwork in this document contains shorthand references to drafts in
   progress.  Please apply the following replacements:

   o  "XXXX" --> the assigned numerical RFC value for this draft

   o  "ZZZZ" --> the assigned numerical RFC value for
      [I-D.ietf-anima-voucher]





Watsen, et al.           Expires August 31, 2018                [Page 1]


Internet-Draft                 Zero Touch                  February 2018


   Artwork in this document contains placeholder values for the date of
   publication of this draft.  Please apply the following replacement:

   o  "2018-02-28" --> the publication date of this draft

   Please update the following informative references to reflect its
   final RFC assignment:

   o  I-D.ietf-netmod-yang-tree-diagrams

   The following one Appendix section is to be removed prior to
   publication:

   o  Appendix A.  Change Log

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on August 31, 2018.

Copyright Notice

   Copyright (c) 2018 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.





Watsen, et al.           Expires August 31, 2018                [Page 2]


Internet-Draft                 Zero Touch                  February 2018


Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   4
     1.1.  Use Cases . . . . . . . . . . . . . . . . . . . . . . . .   5
     1.2.  Terminology . . . . . . . . . . . . . . . . . . . . . . .   6
     1.3.  Requirements Language . . . . . . . . . . . . . . . . . .   7
     1.4.  Tree Diagrams . . . . . . . . . . . . . . . . . . . . . .   8
   2.  Types of Bootstrapping Information  . . . . . . . . . . . . .   8
     2.1.  Redirect Information  . . . . . . . . . . . . . . . . . .   8
     2.2.  Onboarding Information  . . . . . . . . . . . . . . . . .   9
   3.  Artifacts . . . . . . . . . . . . . . . . . . . . . . . . . .   9
     3.1.  Zero Touch Information  . . . . . . . . . . . . . . . . .  10
     3.2.  Owner Certificate . . . . . . . . . . . . . . . . . . . .  10
     3.3.  Ownership Voucher . . . . . . . . . . . . . . . . . . . .  11
     3.4.  Artifact Groupings  . . . . . . . . . . . . . . . . . . .  11
   4.  Sources of Bootstrapping Data . . . . . . . . . . . . . . . .  12
     4.1.  Removable Storage . . . . . . . . . . . . . . . . . . . .  12
     4.2.  DNS Server  . . . . . . . . . . . . . . . . . . . . . . .  13
     4.3.  DHCP Server . . . . . . . . . . . . . . . . . . . . . . .  15
     4.4.  Bootstrap Server  . . . . . . . . . . . . . . . . . . . .  15
   5.  Device Details  . . . . . . . . . . . . . . . . . . . . . . .  17
     5.1.  Initial State . . . . . . . . . . . . . . . . . . . . . .  17
     5.2.  Boot Sequence . . . . . . . . . . . . . . . . . . . . . .  18
     5.3.  Processing a Source of Bootstrapping Data . . . . . . . .  19
     5.4.  Validating Signed Data  . . . . . . . . . . . . . . . . .  21
     5.5.  Processing Redirect Information . . . . . . . . . . . . .  22
     5.6.  Processing Onboarding Information . . . . . . . . . . . .  23
   6.  The Zero Touch Information Data Model . . . . . . . . . . . .  24
     6.1.  Data Model Overview . . . . . . . . . . . . . . . . . . .  25
     6.2.  Example Usage . . . . . . . . . . . . . . . . . . . . . .  25
     6.3.  YANG Module . . . . . . . . . . . . . . . . . . . . . . .  27
   7.  The Zero Touch Bootstrap Server API . . . . . . . . . . . . .  33
     7.1.  API Overview  . . . . . . . . . . . . . . . . . . . . . .  33
     7.2.  Example Usage . . . . . . . . . . . . . . . . . . . . . .  34
     7.3.  YANG Module . . . . . . . . . . . . . . . . . . . . . . .  37
   8.  The Zero Touch Device Data Model  . . . . . . . . . . . . . .  46
     8.1.  Data Model Overview . . . . . . . . . . . . . . . . . . .  47
     8.2.  Example Usage . . . . . . . . . . . . . . . . . . . . . .  47
     8.3.  YANG Module . . . . . . . . . . . . . . . . . . . . . . .  48
   9.  DHCP Zero Touch Options . . . . . . . . . . . . . . . . . . .  52
     9.1.  DHCPv4 Zero Touch Option  . . . . . . . . . . . . . . . .  52
     9.2.  DHCPv6 Zero Touch Option  . . . . . . . . . . . . . . . .  53
     9.3.  Common Field Encoding . . . . . . . . . . . . . . . . . .  55
   10. Security Considerations . . . . . . . . . . . . . . . . . . .  55
     10.1.  Immutable storage for trust anchors  . . . . . . . . . .  55
     10.2.  Clock Sensitivity  . . . . . . . . . . . . . . . . . . .  55
     10.3.  Blindly authenticating a bootstrap server  . . . . . . .  56
     10.4.  Disclosing Information to Untrusted Servers  . . . . . .  56



Watsen, et al.           Expires August 31, 2018                [Page 3]


Internet-Draft                 Zero Touch                  February 2018


     10.5.  Sequencing Sources of Bootstrapping Data . . . . . . . .  56
     10.6.  The "ietf-zerotouch-information" YANG Module . . . . . .  57
     10.7.  The "ietf-zerotouch-bootstrap-server" YANG Module  . . .  57
   11. IANA Considerations . . . . . . . . . . . . . . . . . . . . .  58
     11.1.  The IETF XML Registry  . . . . . . . . . . . . . . . . .  58
     11.2.  The YANG Module Names Registry . . . . . . . . . . . . .  58
     11.3.  The SMI Security for S/MIME CMS Content Type Registry  .  59
     11.4.  The BOOTP Manufacturer Extensions and DHCP Options
            Registry . . . . . . . . . . . . . . . . . . . . . . . .  59
   12. Acknowledgements  . . . . . . . . . . . . . . . . . . . . . .  59
   13. References  . . . . . . . . . . . . . . . . . . . . . . . . .  60
     13.1.  Normative References . . . . . . . . . . . . . . . . . .  60
     13.2.  Informative References . . . . . . . . . . . . . . . . .  62
   Appendix A.  Workflow Overview  . . . . . . . . . . . . . . . . .  64
     A.1.  Enrollment and Ordering Devices . . . . . . . . . . . . .  64
     A.2.  Owner Stages the Network for Bootstrap  . . . . . . . . .  66
     A.3.  Device Powers On  . . . . . . . . . . . . . . . . . . . .  69
   Appendix B.  Promoting a Connection from Untrusted to Trusted . .  71
   Appendix C.  Change Log . . . . . . . . . . . . . . . . . . . . .  72
     C.1.  ID to 00  . . . . . . . . . . . . . . . . . . . . . . . .  72
     C.2.  00 to 01  . . . . . . . . . . . . . . . . . . . . . . . .  72
     C.3.  01 to 02  . . . . . . . . . . . . . . . . . . . . . . . .  73
     C.4.  02 to 03  . . . . . . . . . . . . . . . . . . . . . . . .  73
     C.5.  03 to 04  . . . . . . . . . . . . . . . . . . . . . . . .  73
     C.6.  04 to 05  . . . . . . . . . . . . . . . . . . . . . . . .  74
     C.7.  05 to 06  . . . . . . . . . . . . . . . . . . . . . . . .  74
     C.8.  06 to 07  . . . . . . . . . . . . . . . . . . . . . . . .  74
     C.9.  07 to 08  . . . . . . . . . . . . . . . . . . . . . . . .  74
     C.10. 08 to 09  . . . . . . . . . . . . . . . . . . . . . . . .  74
     C.11. 09 to 10  . . . . . . . . . . . . . . . . . . . . . . . .  75
     C.12. 10 to 11  . . . . . . . . . . . . . . . . . . . . . . . .  75
     C.13. 11 to 12  . . . . . . . . . . . . . . . . . . . . . . . .  75
     C.14. 12 to 13  . . . . . . . . . . . . . . . . . . . . . . . .  76
     C.15. 13 to 14  . . . . . . . . . . . . . . . . . . . . . . . .  76
     C.16. 14 to 15  . . . . . . . . . . . . . . . . . . . . . . . .  76
     C.17. 15 to 16  . . . . . . . . . . . . . . . . . . . . . . . .  77
     C.18. 16 to 17  . . . . . . . . . . . . . . . . . . . . . . . .  78
     C.19. 17 to 18  . . . . . . . . . . . . . . . . . . . . . . . .  78
     C.20. 18 to 19  . . . . . . . . . . . . . . . . . . . . . . . .  78
     C.21. 19 to 20  . . . . . . . . . . . . . . . . . . . . . . . .  78
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  80

1.  Introduction

   A fundamental business requirement for any network operator is to
   reduce costs where possible.  For network operators, deploying
   devices to many locations can be a significant cost, as sending




Watsen, et al.           Expires August 31, 2018                [Page 4]


Internet-Draft                 Zero Touch                  February 2018


   trained specialists to each site for installations is both cost
   prohibitive and does not scale.

   This document defines Secure Zero Touch Provisioning (SZTP), a
   bootstrapping strategy enabling devices to securely obtain
   bootstrapping data with no installer action beyond physical placement
   and connecting network and power cables.  As such, SZTP enables non-
   technical personel to bring up devices in remote locations without
   the need for any operator input.

   The SZTP solution includes updating the boot image, commiting an
   initial configuration, and executing arbitrary scripts to address
   auxiliary needs.  The updated device is subsequently able to
   establish secure connections with other systems.  For instance, a
   devices may establish NETCONF [RFC8040] and/or RESTCONF [RFC6241]
   connections with deployment-specific network management systems.

   This document primarily regards physical devices, where the setting
   of the device's initial state, described in Section 5.1, occurs
   during the device's manufacturing process.  The SZTP solution may be
   extended to support virtual machines or other such logical
   constructs, but details for how this can be accomplished is left for
   future work.

1.1.  Use Cases

   o  Device connecting to a remotely administered network

         This use-case involves scenarios, such as a remote branch
         office or convenience store, whereby a device connects as an
         access gateway to an ISP's network.  Assuming it is not
         possible to customize the ISP's network to provide any
         bootstrapping support, and with no other nearby device to
         leverage, the device has no recourse but to reach out to an
         Internet-based bootstrap server to bootstrap from.

   o  Device connecting to a locally administered network

         This use-case covers all other scenarios and differs only in
         that the device may additionally leverage nearby devices, which
         may direct it to use a local service to bootstrap from.  If no
         such information is available, or the device is unable to use
         the information provided, it can then reach out to the network
         just as it would for the remotely administered network use-
         case.

   Conceptual workflows for how SZTP might be deployed are provided in
   Appendix A.



Watsen, et al.           Expires August 31, 2018                [Page 5]


Internet-Draft                 Zero Touch                  February 2018


1.2.  Terminology

   This document uses the following terms (sorted by name):

   Artifact:  The term "artifact" is used throughout to represent any of
       the three artifacts defined in Section 3 (zero touch information,
       ownership voucher, and owner certificate).  These artifacts
       collectively provide all the bootstrapping data a device may use.

   Bootstrapping Data:  The term "bootstrapping data" is used throughout
       this document to refer to the collection of data that a device
       may obtain during the bootstrapping process.  Specifically, it
       refers to the three artifacts zero touch information, owner
       certificate, and ownership voucher, as described in Section 3.

   Bootstrap Server:  The term "bootstrap server" is used within this
       document to mean any RESTCONF server implementing the YANG module
       defined in Section 7.3.

   Device:  The term "device" is used throughout this document to refer
       to a network element that needs to be bootstrapped.  See
       Section 5 for more information about devices.

   Manufacturer:  The term "manufacturer" is used herein to refer to the
       manufacturer of a device or a delegate of the manufacturer.

   Network Management System (NMS):  The acronym "NMS" is used
       throughout this document to refer to the deployment specific
       management system that the bootstrapping process is responsible
       for introducing devices to.  From a device's perspective, when
       the bootstrapping process has completed, the NMS is a NETCONF or
       RESTCONF client.

   Onboarding Information:  The term "onboarding information" is used
       herein to refer to one of the two types of "zero touch
       information" defined in this document, the other being "redirect
       information".  Onboarding information is formally defined by the
       "onboarding-information" YANG-data structure in Section 6.3.

   Onboarding Server:  The term "onboarding server" is used herein to
       refer to a bootstrap server that only returns onboarding
       information.

   Owner:  The term "owner" is used throughout this document to refer to
       the person or organization that purchased or otherwise owns a
       device.





Watsen, et al.           Expires August 31, 2018                [Page 6]


Internet-Draft                 Zero Touch                  February 2018


   Owner Certificate:  The term "owner certificate" is used in this
       document to represent an X.509 certificate that binds an owner
       identity to a public key, which a device can use to validate a
       signature over the zero touch information artifact.  The owner
       certificate may be communicated along with its chain of
       intermediate certificates leading up to a known trust anchor.
       The owner certificate is one of the three bootstrapping artifacts
       described in Section 3.

   Ownership Voucher:  The term "ownership voucher" is used in this
       document to represent the voucher artifact defined in
       [I-D.ietf-anima-voucher].  The ownership voucher is used to
       assign a device to an owner.  The ownership voucher is one of the
       three bootstrapping artifacts described in Section 3.

   Redirect Information:  The term "redirect information" is used herein
       to refer to one of the two types of "zero touch information"
       defined in this document, the other being "onboarding
       information".  Redirect information is formally defined by the
       "redirect-information" YANG-data structure in Section 6.3.

   Redirect Server:  The term "redirect server" is used to refer to a
       bootstrap server that only returns redirect information.  A
       redirect server is particularly useful when hosted by a
       manufacturer, as a well-known (e.g., Internet-based) resource to
       redirect devices to deployment-specific bootstrap servers.

   Signed Data:  The term "signed data" is used throughout to mean zero
       touch information that has been signed, specifically by a private
       key possessed by a device's owner.

   Unsigned Data:  The term "unsigned data" is used throughout to mean
       zero touch information that has not been signed.

   Zero Touch Information:  The term "zero touch information" is used
       herein to refer either redirect information or onboarding
       information.  Zero touch information is one of the three
       bootstrapping artifacts described in Section 3.

1.3.  Requirements Language

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in BCP
   14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.





Watsen, et al.           Expires August 31, 2018                [Page 7]


Internet-Draft                 Zero Touch                  February 2018


1.4.  Tree Diagrams

   Tree diagrams used in this document follow the notation defined in
   [I-D.ietf-netmod-yang-tree-diagrams].

2.  Types of Bootstrapping Information

   This document defines two types of information that devices can
   access during the bootstrapping process.  These information types are
   described in this section.  Examples are provided in Section 6.2

2.1.  Redirect Information

   Redirect information redirects a device to another bootstrap server.
   Redirect information encodes a list of bootstrap servers, each
   specifying the bootstrap server's hostname (or IP address), an
   optional port, and an optional trust anchor certificate that the
   device can use to authenticate the bootstrap server with.

   Redirect information is YANG modeled data formally defined by the
   "redirect-information" container in the YANG module presented in
   Section 6.3.  This container has the tree diagram shown below.

   +--:(redirect-information)
      +---- redirect-information
         +---- bootstrap-server* [address]
            +---- address         inet:host
            +---- port?           inet:port-number
            +---- trust-anchor?   cms

   Redirect information may be trusted or untrusted.  The redirect
   information is trusted whenever it is obtained via a secure
   connection to a trusted bootstrap server, or whenever it is signed by
   the device's owner.  In all other cases, the redirect information is
   untrusted.

   Trusted redirect information is useful for enabling a device to
   establish a secure connection to a specified bootstrap server, which
   is possible when the redirect information includes the bootstrap
   server's trust anchor certificate.

   Untrusted redirect information is useful for directing a device to a
   bootstrap server where signed data has been staged for it to obtain.
   Note that, when the redirect information is untrusted, devices
   discard any potentially included trust anchor certificates.

   How devices process redirect information is described in Section 5.5.




Watsen, et al.           Expires August 31, 2018                [Page 8]


Internet-Draft                 Zero Touch                  February 2018


2.2.  Onboarding Information

   Onboarding information provides data necessary for a device to
   bootstrap itself and establish secure connections with other systems.
   As defined in this document, onboarding information can specify
   details about the boot image a device must be running, specify an
   initial configuration the device must commit, and specify scripts
   that the device must successfully execute.

   Onboarding information is YANG modeled data formally defined by the
   "onboarding-information" container in the YANG module presented in
   Section 6.3.  This container has the tree diagram shown below.

   +--:(onboarding-information)
      +---- onboarding-information
         +---- boot-image
         |  +---- os-name?              string
         |  +---- os-version?           string
         |  +---- download-uri*         inet:uri
         |  +---- image-verification* [hash-algorithm]
         |     +---- hash-algorithm    identityref
         |     +---- hash-value        yang:hex-string
         +---- configuration-handling?      enumeration
         +---- pre-configuration-script?    script
         +---- configuration?               binary
         +---- post-configuration-script?   script

   Onboarding information must be trusted for it to be of any use to a
   device.  There is no option for a device to process untrusted
   onboarding information.

   Onboarding information is trusted whenever it is obtained via a
   secure connection to a trusted bootstrap server, or whenever it is
   signed by the device's owner.  In all other cases, the onboarding
   information is untrusted.

   How devices process onboarding information is described in
   Section 5.6.

3.  Artifacts

   This document defines three artifacts that can be made available to
   devices while they are bootstrapping.  Each source of bootstrapping
   information specifies how it provides the artifacts defined in this
   section (see Section 4).






Watsen, et al.           Expires August 31, 2018                [Page 9]


Internet-Draft                 Zero Touch                  February 2018


3.1.  Zero Touch Information

   The zero touch information artifact encodes the essential
   bootstrapping data for the device.  This artifact is used to encode
   the redirect information and onboarding information types discussed
   in Section 2.

   The zero touch information artifact is a CMS structure, as described
   in [RFC5652], encoded using ASN.1 distinguished encoding rules (DER),
   as specified in ITU-T X.690 [ITU.X690.1994].  The CMS structure MUST
   contain content conforming to the YANG module specified in
   Section 6.3.

   The zero touch information CMS structure may encode signed or
   unsigned bootstrapping data.

   When the zero touch information artifact is unsigned, as it might be
   when communicated over trusted channels, the CMS structure's top-most
   content type MUST be one of the OIDs described in Section 11.3, or
   the OID id_data (1.2.840.113549.1.7.1), in which case the encoding
   (JSON, XML, etc.)  SHOULD be communicated externally.  In either
   case, the associated content is an octet string containing
   'zerotouch-information' data in the expected encoding.

   When the zero touch information artifact is signed, as it might be
   when communicated over untrusted channels, the CMS structure's top-
   most content type MUST be the OID id-signedData
   (1.2.840.113549.1.7.2), and its inner eContentType MUST be one of the
   OIDs described in Section 11.3, or the OID id_data
   (1.2.840.113549.1.7.1), in which case the encoding (JSON, XML, etc.)
   SHOULD be communicated externally.  In either case, the associated
   content or eContent is an octet string containing 'zerotouch-
   information' data in the expected encoding.

3.2.  Owner Certificate

   The owner certificate artifact is an X.509 certificate [RFC5280] that
   is used to identify an "owner" (e.g., an organization).  The owner
   certificate can be signed by any certificate authority (CA).  The
   owner certificate either MUST have no Key Usage specified or the Key
   Usage MUST at least set the "digitalSignature" bit.  The values for
   the owner certificate's "subject" and/or "subjectAltName" are not
   constrained by this document.

   The owner certificate is used by a device to verify the signature
   over the zero touch information artifact (Section 3.1) that the
   device should have also received, as described in Section 3.4.  In
   particular, the device verifies the signature using the public key in



Watsen, et al.           Expires August 31, 2018               [Page 10]


Internet-Draft                 Zero Touch                  February 2018


   the owner certificate over the content contained within the zero
   touch information artifact.

   The owner certificate artifact is formally a CMS structure, as
   specified by [RFC5652], encoded using ASN.1 distinguished encoding
   rules (DER), as specified in ITU-T X.690 [ITU.X690.1994].  This CMS
   structure's top-most content type MUST be the OID id-signedData
   (1.2.840.113549.1.7.2).  The inner SignedData structure is the
   degenerate form, whereby there are no signers, that is commonly used
   to disseminate certificates, CRLs, and OCSP Responses.

   The owner certificate CMS structure MUST contain the owner
   certificate itself, as well as all intermediate certificates leading
   up to the 'pinned-domain-cert' certificate specified in the ownership
   voucher.  The owner certificate artifact MAY optionally include the
   'pinned-domain-cert' as well.

   In order to support devices deployed on private networks, the owner
   certificate CMS structure MAY also contain suitably fresh, as
   determined by local policy, CRLs [RFC5280] and/or OCSP Responses
   [RFC6960].  Having these revocation objects stapled to the owner
   certificate may obviate the need for the device to have to download
   them dynamically using the CRL distribution point or an OCSP
   responder specified in the associated certificates.

3.3.  Ownership Voucher

   The ownership voucher artifact is used to securely identify a
   device's owner, as it is known to the manufacturer.  The ownership
   voucher is signed by the device's manufacturer.

   The ownership voucher is used to verify the owner certificate
   (Section 3.2) that the device should have also received, as described
   in Section 3.4.  In particular, the device verifies that the owner
   certificate has a chain of trust leading to the trusted certificate
   included in the ownership voucher ('pinned-domain-cert').  Note that
   this relationship holds even when the owner certificate is a self-
   signed certificate, and hence also the pinned-domain-cert.

   The ownership voucher artifact, including its encoding, is formally
   defined in [I-D.ietf-anima-voucher].

3.4.  Artifact Groupings

   The previous sections discussed the bootstrapping artifacts, but only
   certain groupings of these artifacts make sense to return in the
   various bootstrapping situations described in this document.  These
   groupings are:



Watsen, et al.           Expires August 31, 2018               [Page 11]


Internet-Draft                 Zero Touch                  February 2018


      Unsigned Information:  This grouping is useful for cases when
         transport level security can be used to convey trust (e.g.,
         HTTPS), or when the information can be processed in a
         provisional manner (i.e.  unsigned redirect information).

      Signed Information, without revocations:  This grouping is useful
         when signed information is needed, because it is obtained from
         an untrusted source, and it cannot be processed provisionally,
         and yet either revocations are not needed or they can be
         obtained dynamically.

      Signed Information, with revocations:  This grouping is useful
         when signed information is needed, because it is obtained from
         an untrusted source, and it cannot be processed provisionally,
         and revocations are needed and cannot be obtained dynamically.

   The artifacts associated with these groupings are described below:

                           Zero Touch       Ownership       Owner
   Grouping                Information      Voucher         Certificate
   --------------------    -------------    ------------    -----------
   Unsigned Information    Yes, no sig      No              No

   Signed Information,     Yes, with sig    Yes, without    Yes, without
   without revocations                      revocations     revocations

   Signed Information,     Yes, with sig    Yes, with       Yes, with
   with revocations                         revocations     revocations

4.  Sources of Bootstrapping Data

   This section defines some sources for bootstrapping data that a
   device can access.  The list of sources defined here is not meant to
   be exhaustive.  It is left to future documents to define additional
   sources for obtaining bootstrapping data.

   For each source of bootstrapping data defined in this section,
   details are given for how the three artifacts listed in Section 3 are
   provided.

4.1.  Removable Storage

   A directly attached removable storage device (e.g., a USB flash
   drive) MAY be used as a source of zero touch bootstrapping data.

   Use of a removable storage device is compelling, as it does not
   require any external infrastructure to work.  It is notable that the
   raw boot image file can also be located on the removable storage



Watsen, et al.           Expires August 31, 2018               [Page 12]


Internet-Draft                 Zero Touch                  February 2018


   device, enabling a removable storage device to be a fully self-
   standing bootstrapping solution.

   To use a removable storage device as a source of bootstrapping data,
   a device need only detect if the removable storage device is plugged
   in and mount its filesystem.

   A removable storage device is an untrusted source of bootstrapping
   data.  This means that the information stored on the removable
   storage device either MUST be signed or MUST be information that can
   be processed provisionally (e.g., unsigned redirect information).

   From an artifact perspective, since a removable storage device
   presents itself as a filesystem, the bootstrapping artifacts need to
   be presented as files.  The three artifacts defined in Section 3 are
   mapped to files below.

   Artifact to File Mapping:

      Zero Touch Information:  Mapped to a file containing the binary
         artifact described in Section 3.1 (e.g., zerotouch-
         information.cms).

      Owner Certificate:  Mapped to a file containing the binary
         artifact described in Section 3.2 (e.g., owner-
         certificate.cms).

      Ownership Voucher:  Mapped to a file containing the binary
         artifact described in Section 3.3 (e.g., ownership-voucher.cms
         or ownership-voucher.vcj).

   The format of the removable storage device's filesystem and the
   naming of the files are outside the scope of this document.  However,
   in order to facilitate interoperability, it is RECOMMENDED devices
   support open and/or standards based filesystems.  It is also
   RECOMMENDED that devices assume a file naming convention that enables
   more than one instance of bootstrapping data (i.e., for different
   devices) to exist on a removable storage device.  The file naming
   convention SHOULD additionally be unique to the manufacturer, in
   order to enable bootstrapping data from multiple manufacturers to
   exist on a removable storage device.

4.2.  DNS Server

   A DNS server MAY be used as a source of zero touch bootstrapping
   data.





Watsen, et al.           Expires August 31, 2018               [Page 13]


Internet-Draft                 Zero Touch                  February 2018


   Using a DNS server may be a compelling option for deployments having
   existing DNS infrastructure, as it enables a touchless bootstrapping
   option that does not entail utilizing an Internet based resource
   hosted by a 3rd-party.

   To use a DNS server as a source of bootstrapping data, a device MAY
   perform a multicast DNS [RFC6762] query searching for the service
   "_zerotouch._tcp.local.".  Alternatively the device MAY perform DNS-
   SD [RFC6763] via normal DNS operation, using the domain returned to
   it from the DHCP server; for example, searching for the service
   "_zerotouch._tcp.example.com".

   Unsigned DNS records (e.g., not using DNSSEC as described in
   [RFC6698]) are an untrusted source of bootstrapping data.  This means
   that the information stored in the DNS records either MUST be signed,
   or MUST be information that can be processed provisionally (e.g.,
   unsigned redirect information).

   From an artifact perspective, since a DNS server presents resource
   records (Section 3.2.1 of [RFC1035]), the bootstrapping artifacts
   need to be presented as resource records.  The three artifacts
   defined in Section 3 are mapped to resource records below.

   Artifact to Resource Record Mapping:

      Zero Touch Information:  Mapped to a TXT record called "zt-info"
         containing the base64-encoding of the binary artifact described
         in Section 3.1.

      Owner Certificate:  Mapped to a TXT record called "zt-cert"
         containing the base64-encoding of the binary artifact described
         in Section 3.2.

      Ownership Voucher:  Mapped to a TXT record called "zt-voucher"
         containing the base64-encoding of the binary artifact described
         in Section 3.3.

   TXT records have an upper size limit of 65535 bytes (Section 3.2.1 in
   RFC1035), since "RDLENGTH" is a 16-bit field.  Please see
   Section 3.1.3 in RFC4408 for how a TXT record can achieve this size.
   Due to this size limitation, some zero touch information artifacts
   may not fit.  In particular, onboarding information could hit this
   upper bound, depending on the size of the included configuration and
   scripts.







Watsen, et al.           Expires August 31, 2018               [Page 14]


Internet-Draft                 Zero Touch                  February 2018


4.3.  DHCP Server

   A DHCP server MAY be used as a source of zero touch bootstrapping
   data.

   Using a DHCP server may be a compelling option for deployments having
   existing DHCP infrastructure, as it enables a touchless bootstrapping
   option that does not entail utilizing an Internet based resource
   hosted by a 3rd-party.

   A DHCP server is an untrusted source of bootstrapping data.  Thus the
   information stored on the DHCP server either MUST be signed, or it
   MUST be information that can be processed provisionally (e.g.,
   unsigned redirect information).

   However, unlike other sources of bootstrapping data described in this
   document, the DHCP protocol (especially DHCP for IPv4) is very
   limited in the amount of data that can be conveyed, to the extent
   that signed data cannot be communicated.  This means that only
   unsigned redirect information can be conveyed via DHCP.

   Since the redirect information is unsigned, it SHOULD NOT include the
   optional trust anchor certificate, as it takes up space in the DHCP
   message, and the device would have to discard it anyway.  For this
   reason, the DHCP options defined in Section 9 do not enable the trust
   anchor certificate to be encoded.

   From an artifact perspective, the three artifacts defined in
   Section 3 are mapped to the DHCP fields specified in Section 9 as
   follows:

      Zero Touch Information:  This artifact is not supported directly.
         Instead, the essence of unsigned redirect information is mapped
         to the DHCP options described in Section 9.

      Owner Certificate:  Not supported.  There is not enough space in
         the DHCP packet to hold an owner certificate artifact.

      Ownership Voucher:  Not supported.  There is not enough space in
         the DHCP packet to hold an ownership voucher artifact.

4.4.  Bootstrap Server

   A bootstrap server MAY be used as a source of zero touch
   bootstrapping data.  A bootstrap server is defined as a RESTCONF
   [RFC8040] server implementing the YANG module provided in Section 7.





Watsen, et al.           Expires August 31, 2018               [Page 15]


Internet-Draft                 Zero Touch                  February 2018


   Using a bootstrap server as a source of bootstrapping data is a
   compelling option as it MAY use transport-level security, obviating
   the need for signed data, which may be easier to deploy in some
   situations.

   Unlike any other source of bootstrapping data described in this
   document, a bootstrap server is not only a source of data, but it can
   also receive data from devices using the YANG-defined 'report-
   progress' RPC defined in the YANG module (Section 7.3).  The 'report-
   progress' RPC enables visibility into the bootstrapping process
   (e.g., warnings and errors), and provides potentially useful
   information upon completion (e.g., the device's SSH host-keys).

   A bootstrap server may be a trusted or an untrusted source of
   bootstrapping data, depending on if the device learned about the
   bootstrap server's trust anchor from a trusted source.  When a
   bootstrap server is trusted, the information returned from it MAY be
   signed.  However, when the server is untrusted, in order for its
   information to be of any use to the device, the bootstrap information
   either MUST be signed or MUST be information that can be processed
   provisionally (e.g., unsigned redirect information).

   From an artifact perspective, since a bootstrap server presents data
   conforming to a YANG data model, the bootstrapping artifacts need to
   be mapped to YANG nodes.  The three artifacts defined in Section 3
   are mapped to 'output' nodes of the 'get-bootstrapping-data' RPC
   defined in Section 7.3 below.

   Artifact to Bootstrap Server Mapping:

      Zero Touch Information:  Mapped to the 'zerotouch-information'
         leaf in the output of the 'get-bootstrapping-data' RPC.

      Owner Certificate:  Mapped to the 'owner-certificate' leaf in the
         output of the 'get-bootstrapping-data' RPC.

      Ownership Voucher:  Mapped to the 'ownership-voucher' leaf in the
         output of the 'get-bootstrapping-data' RPC.

   Zero touch bootstrap servers have only two endpoints, one for the
   'get-bootstrapping-data' RPC and one for the 'report-progress' RPC.
   These RPCs use the authenticated RESTCONF username to isolate the
   execution of the RPC from other devices.








Watsen, et al.           Expires August 31, 2018               [Page 16]


Internet-Draft                 Zero Touch                  February 2018


5.  Device Details

   Devices supporting the bootstrapping strategy described in this
   document MUST have the preconfigured state and bootstrapping logic
   described in the following sections.

5.1.  Initial State

   +-------------------------------------------------------------+
   |                           <device>                          |
   |                                                             |
   | +---------------------------------------------------------+ |
   | |                   <read/write storage>                  | |
   | |                                                         | |
   | | 1. flag to enable zerotouch bootstrapping set to "true" | |
   | +---------------------------------------------------------+ |
   |                                                             |
   | +---------------------------------------------------------+ |
   | |                   <read-only storage>                   | |
   | |                                                         | |
   | | 2. client cert & associated intermediate certificate(s) | |
   | | 3. list of trusted well-known bootstrap servers         | |
   | | 4. list of trust anchor certs for bootstrap servers     | |
   | | 5. list of trust anchor certs for ownership vouchers    | |
   | +---------------------------------------------------------+ |
   |                                                             |
   |                  +----------------------+                   |
   |                  |   <secure storage>   |                   |
   |                  |                      |                   |
   |                  |  6. private key      |                   |
   |                  +----------------------+                   |
   |                                                             |
   +-------------------------------------------------------------+

   Each numbered item below corresponds to a numbered item in the
   diagram above.

   1.  Devices MUST have a configurable variable that is used to enable/
       disable zerotouch bootstrapping.  This variable MUST be enabled
       by default in order for zerotouch bootstrapping to run when the
       device first powers on.  Because it is a goal that the
       configuration installed by the bootstrapping process disables
       zerotouch bootstrapping, and because the configuration may be
       merged into the existing configuration, using a configuration
       node that relies on presence is NOT RECOMMENDED, as it cannot be
       removed by the merging process.





Watsen, et al.           Expires August 31, 2018               [Page 17]


Internet-Draft                 Zero Touch                  February 2018


   2.  Devices that support loading bootstrapping data from bootstrap
       servers (see Section 4.4) SHOULD possess a client certificate
       (e.g.  IDevID, as defined in [Std-802.1AR-2009]), and any
       intermediate certificates leading to the certificate's well-known
       trust-anchor.  Note that the well-known trust anchor certificate
       may be an intermediate certificate or a self-signed root
       certificate.  To support devices not having a client certificate,
       devices MAY alternatively, or in addition to, identify and
       authenticate themselves to the bootstrap server using an HTTP
       authentication scheme, as allowed by Section 2.5 in [RFC8040];
       however, this document does not define any mechanisms for
       operator input enabling, for example, the entering of a password.

   3.  Devices that support loading bootstrapping data from well-known
       bootstrap servers MUST possess a list of the well-known bootstrap
       servers.  Consistent with redirect information (Section 2.1, each
       bootstrap server can be identified by its hostname or IP address,
       and an optional port.

   4.  Devices that support loading bootstrapping data from well-known
       bootstrap servers MUST also possess a list of trust anchor
       certificates that can be used to authenticate the well-known
       bootstrap servers.  For each trust anchor certificate, if it is
       not itself a self-signed root certificate, the device SHOULD also
       possess the chain of intermediate certificates leading up to and
       including the self-signed root certificate.

   5.  Devices that support loading signed data (see Section 1.2) MUST
       possess the trust anchor certificates for validating ownership
       vouchers.  For each trust anchor certificate, if it is not itself
       a self-signed root certificate, the device SHOULD also possess
       the chain of intermediate certificates leading up to and
       including the self-signed root certificate.

   6.  Devices that support using a client certificate to authenticate
       to a bootstrap servers MUST possess the private key that
       corresponds to the public key encoded in the client certificate.
       This private key SHOULD be securely stored, ideally in a
       cryptographic processor (e.g., a TPM).

   A YANG module representing this data is provided in Section 8.

5.2.  Boot Sequence

   A device claiming to support the bootstrapping strategy defined in
   this document MUST support the boot sequence described in this
   section.




Watsen, et al.           Expires August 31, 2018               [Page 18]


Internet-Draft                 Zero Touch                  February 2018


       Power On
           |
           v                                No
    1. Zerotouch bootstrapping configured ------> Boot normally
           |
           | Yes
           v
    2. For each supported source of bootstrapping data,
       try to load bootstrapping data from the source
           |
           |
           v                               Yes
    3. Able to bootstrap from any source? -----> Run with new config
           |
           | No
           v
    4. Loop and/or wait for manual provisioning.


   Each numbered item below corresponds to a numbered item in the
   diagram above.

   1.  When the device powers on, it first checks to see if zerotouch
       bootstrapping is configured, as is expected to be the case for
       the device's preconfigured initial state.  If zerotouch
       bootstrapping is not configured, then the device boots normally.

   2.  The device iterates over its list of sources for bootstrapping
       data (Section 4).  Details for how to processes a source of
       bootstrapping data are provided in Section 5.3.

   3.  If the device is able to bootstrap itself from any of the sources
       of bootstrapping data, it runs with the new bootstrapped
       configuration.

   4.  Otherwise the device MAY loop back through the list of
       bootstrapping sources again and/or wait for manual provisioning.

5.3.  Processing a Source of Bootstrapping Data

   This section describes a recursive algorithm that devices can use to,
   ultimately, obtain onboarding information.  The algorithm is
   recursive because sources of bootstrapping data may return redirect
   information, which causes the algorithm to run again, for the newly
   discovered sources of bootstrapping information.  An expression that
   captures all possible successful sequences of bootstrapping
   information is zero or more redirect information responses, followed
   by one onboarding information response.



Watsen, et al.           Expires August 31, 2018               [Page 19]


Internet-Draft                 Zero Touch                  February 2018


   An important aspect of the algorithm is knowing when data needs to be
   signed or not.  The following figure provides a summary of options:

                                    Untrusted Source  Trusted Source
       Kind of Bootstrapping Data     Can Provide?     Can Provide?

       Unsigned Redirect Info     :       Yes+             Yes
       Signed Redirect Info       :       Yes              Yes*
       Unsigned Onboarding Info   :        No              Yes
       Signed Onboarding Info     :       Yes              Yes*

       The '+' above denotes that the source redirected to MUST
       return signed data, or more unsigned redirect information.

       The '*' above denotes that, while possible, it is generally
       unnecessary for a trusted source to return signed data.

   The recursive algorithm uses a conceptual global-scoped variable
   called "trust-state".  The trust-state variable is initialized to
   FALSE.  The ultimate goal of this algorithm is for the device to
   process onboarding information (Section 2.2) while the trust-state
   variable is TRUE.

   If the source of bootstrapping data (Section 4) is a bootstrap server
   (Section 4.4), and the device is able to authenticate the bootstrap
   server using X.509 certificate path validation ([RFC6125], Section 6)
   to one of the device's preconfigured trust anchors, or to a trust
   anchor that it learned from a previous step, then the device MUST set
   trust-state to TRUE.

   When establishing a connection to a trusted bootstrap server (i.e.
   trust-state is TRUE), the device MAY, per Section 2.5 in [RFC8040],
   identify and authenticate itself to the bootstrap server using a TLS-
   level client certificate and/or an HTTP authentication scheme.  If
   both mechanisms are used, they MUST both identify the same device
   using its serial number.

   When establishing a connection to an untrusted bootstrap server (i.e.
   trust-state is FALSE), it is still necessary for the device to
   identify itself, in order to receive device-specific signed data, due
   to the ownership voucher encoding the device's serial number.  The
   device MAY identify and authenticate itself to the bootstrap server
   using a TLS-level client certificate and/or an HTTP authentication
   scheme.  However, because the bootstrap server is untrusted, the
   device MUST NOT use an authentication scheme that conveys a shared
   secret, such as a password.





Watsen, et al.           Expires August 31, 2018               [Page 20]


Internet-Draft                 Zero Touch                  February 2018


   When sending a client certificate, the device MUST also send all the
   intermediate certificates leading up to, and optionally including,
   the client certificate's well-known trust anchor certificate.

   For any source of bootstrapping data (e.g., Section 4), if the
   bootstrapping data returned is signed and the device is able to
   validate the signed data using the algorithm described in
   Section 5.4, then the device MUST set trust-state to TRUE; otherwise,
   if the device is unable to validate the signed data, the device MUST
   set trust-state to FALSE.  Note, this is worded to cover the special
   case when signed data is returned even from a trusted bootstrap
   server.

   If the bootstrapping data is onboarding information, and trust-state
   is FALSE, the device MUST exit the recursive algorithm (as this is
   not allowed, see the figure above), returning to the state machine
   described in Section 5.2.  Otherwise, the device MUST attempt to
   process the onboarding information as described in Section 5.6.  In
   either case, success or failure, the device MUST exit the recursive
   algorithm, returning to the state machine described in Section 5.2,
   the only difference being in how it responds to the "Able to
   bootstrap from any source?" conditional described in the figure in
   the section.

   If the bootstrapping data is redirect information, the device MUST
   process the redirect information as described in Section 5.5.  This
   is the recursion step, it will cause the device to reenter this
   algorithm, but this time the data source will definitely be a
   bootstrap server, as that is all redirect information is able to
   redirect a device to.

5.4.  Validating Signed Data

   Whenever a device is presented signed data, it MUST validate the
   signed data as described in this section.  This includes the case
   where the signed data is provided by a trusted source.

   Whenever there is signed data, the device MUST also be provided an
   ownership voucher and an owner certificate.  How all the needed
   artifacts are provided for each source of bootstrapping data is
   described in Section 4.

   In order to validate signed data, the device MUST first authenticate
   the ownership voucher by validating its signature to one of its
   preconfigured trust anchors (see Section 5.1), which may entail using
   additional intermediate certificates attached to the ownership
   voucher.  If the device has an accurate clock, it MUST verify that
   the ownership voucher was created in the past (i.e., 'created-on' <



Watsen, et al.           Expires August 31, 2018               [Page 21]


Internet-Draft                 Zero Touch                  February 2018


   now) and, if the 'expires-on' leaf is present, the device MUST verify
   that the ownership voucher has not yet expired (i.e., now < 'expires-
   on').  The device MUST verify that the ownership voucher's
   'assertion' value is acceptable (e.g., some devices may only accept
   the assertion value 'verified').  The device MUST verify that the
   ownership voucher specifies the device's serial number in the
   'serial-number' leaf.  If the 'idevid-issuer' leaf is present, the
   device MUST verify that the value is set correctly.  If the
   authentication of the ownership voucher is successful, the device
   extracts the 'pinned-domain-cert' node, an X.509 certificate, that is
   needed to verify the owner certificate in the next step.

   The device MUST next authenticate the owner certificate by performing
   X.509 certificate path verification to the trusted certificate
   extracted from the ownership voucher's 'pinned-domain-cert' node.
   This verification may entail using additional intermediate
   certificates attached to the owner certificate artifact.  If the
   ownership voucher's 'domain-cert-revocation-checks' node's value is
   set to "true", the device MUST verify the revocation status of the
   certificate chain used to sign the owner certificate and, if the
   revocation status is not attainable or if it is determined that a
   certificate has been revoked, the device MUST not validate the owner
   certificate.

   Finally the device MUST verify the zero touch information artifact
   was signed by the validated owner certificate.

   If any of these steps fail, the device MUST invalidate the signed
   data and not perform any subsequent steps.

5.5.  Processing Redirect Information

   In order to process redirect information (Section 2.1), the device
   MUST follow the steps presented in this section.

   Processing redirect information is straightforward, the device
   sequentially steps through the list of provided bootstrap servers
   until it can find one it can bootstrap from.

   If a hostname is provided, and the hostname's DNS resolution is to
   more than one IP address, the device MUST attempt to connect to all
   of the DNS resolved addresses at least once, before moving on to the
   next bootstrap server.  If the device is able to obtain bootstrapping
   data from any of the DNS resolved addresses, it MUST immediately
   process that data, without attempting to connect to any of the other
   DNS resolved addresses.





Watsen, et al.           Expires August 31, 2018               [Page 22]


Internet-Draft                 Zero Touch                  February 2018


   If the redirect information is trusted (e.g., trust-state is TRUE),
   and the bootstrap server entry contains a trust anchor certificate,
   then the device MUST authenticate the specified bootstrap server's
   TLS server certificate using X.509 certificate path validation
   ([RFC6125], Section 6) to the specified trust anchor.  If the
   bootstrap server entry does not contain a trust anchor certificate
   device, the device MUST establish a provisional connection to the
   bootstrap server (i.e., by blindly accepting its server certificate),
   and set trust-state to FALSE.

   If the redirect information is untrusted (e.g., trust-state is
   FALSE), the device MUST discard any trust anchors provided by the
   redirect information and establish a provisional connection to the
   bootstrap server (i.e., by blindly accepting its TLS server
   certificate).

5.6.  Processing Onboarding Information

   In order to process onboarding information (Section 2.2), the device
   MUST follow the steps presented in this section.

   When processing onboarding information, the device MUST first process
   the boot image information (if any), then execute the pre-
   configuration script (if any), then commit the initial configuration
   (if any), and then execute the post-configuration script (if any), in
   that order.  If the device encounters an error at any step, it MUST
   NOT proceed to the next step.

   When the onboarding information is obtained from a trusted bootstrap
   server, the device SHOULD send progress reports throughout the
   bootstrapping process using the bootstrap server's 'report-progress'
   RPC.  When the onboarding information was obtained from an untrusted
   bootstrap server, the device SHOULD NOT send any progress reports to
   the bootstrap server, even after validating any signed data it may
   have receive from the bootstrap server.

   If boot image criteria is specified, the device MUST first determine
   if the boot image it is running satisfies the specified boot image
   criteria.  If the device is not running the specified boot image,
   then it MUST install the specified boot image or fail processing the
   onboarding information.  In order to install the specified boot
   image, the device MUST download, verify, and install the specified
   boot image, and then reboot.  To verify the downloaded boot image,
   the device MUST check that the boot image file matches the
   verification fingerprint supplied by the onboarding information.
   Upon rebooting, the bootstrapping process runs again, which will
   eventually come to this very point, but this time the device will be




Watsen, et al.           Expires August 31, 2018               [Page 23]


Internet-Draft                 Zero Touch                  February 2018


   running the specified boot image, and thus will move to processing
   the next step.

   Next, for devices that support executing scripts, if a pre-
   configuration script has been specified, the device MUST execute the
   script and check its exit status code to determine if it had any
   warnings or errors.  In the case of errors, the device MUST reset
   itself in such a way that wipes out any bad state the script may have
   left behind.

   Next, if an initial configuration has been supplied, the device MUST
   commit the provided initial configuration, using the approach
   specified by the 'configuration-handling' leaf.  If there is an
   error, and the device previously executed a pre-configuration script,
   the device does not need to reset itself in order to wipe out any
   state the script may have left behind; this implies that the pre-
   configuration script must be idempotent.

   Again, for devices that support executing scripts, if a post-
   configuration script has been specified, the device MUST execute the
   script and check its exit status code to determine if it had any
   warnings or errors.  In the case of errors, the device MUST reset
   itself in such a way that wipes out any bad state the script may have
   left behind.

   At this point, the device has completely processed the bootstrapping
   data.  If the device obtained the onboarding information from a
   trusted bootstrap server, the device MUST post the 'bootstrap-
   complete' progress report now, using the bootstrap server's 'report-
   progress' RPC.

   The device is now running its initial configuration.  Notably, if
   NETCONF Call Home or RESTCONF Call Home [RFC8071] is configured, the
   device initiates trying to establish a call home connection at this
   time.

6.  The Zero Touch Information Data Model

   This section defines a YANG 1.1 [RFC7950] module that is used to
   define the data model for the zero touch information artifact
   described in Section 3.1.  This data model uses the 'yang-data'
   extension statement defined in [I-D.ietf-netmod-yang-data-ext].
   Examples illustrating this data model are provided in Section 6.2.








Watsen, et al.           Expires August 31, 2018               [Page 24]


Internet-Draft                 Zero Touch                  February 2018


6.1.  Data Model Overview

   The following tree diagram provides an overview of the data model for
   the zero touch information artifact.

   module: ietf-zerotouch-information

     yang-data zerotouch-information:
         +---- (information-type)
            +--:(redirect-information)
            |  +---- redirect-information
            |     +---- bootstrap-server* [address]
            |        +---- address         inet:host
            |        +---- port?           inet:port-number
            |        +---- trust-anchor?   cms
            +--:(onboarding-information)
               +---- onboarding-information
                  +---- boot-image
                  |  +---- os-name?              string
                  |  +---- os-version?           string
                  |  +---- download-uri*         inet:uri
                  |  +---- image-verification* [hash-algorithm]
                  |     +---- hash-algorithm    identityref
                  |     +---- hash-value        yang:hex-string
                  +---- configuration-handling?      enumeration
                  +---- pre-configuration-script?    script
                  +---- configuration?               binary
                  +---- post-configuration-script?   script

6.2.  Example Usage

   The following example illustrates how redirect information
   (Section 2.1) can be encoded using JSON.


















Watsen, et al.           Expires August 31, 2018               [Page 25]


Internet-Draft                 Zero Touch                  February 2018


   {
     "ietf-zerotouch-information:redirect-information" : {
       "bootstrap-server" : [
         {
           "address" : "phs1.example.com",
           "port" : 8443,
           "trust-anchor" : "base64encodedvalue=="
         },
         {
           "address" : "phs2.example.com",
           "port" : 8443,
           "trust-anchor" : "base64encodedvalue=="
         },
         {
           "address" : "phs3.example.com",
           "port" : 8443,
           "trust-anchor" : "base64encodedvalue=="
         }
       ]
     }
   }

   The following example illustrates how onboarding information
   (Section 2.2) can be encoded using JSON.

   [note: '\' line wrapping for formatting only]

   {
     "ietf-zerotouch-information:onboarding-information" : {
       "boot-image" : {
         "os-name" : "VendorOS",
         "os-version" : "17.2R1.6",
         "download-uri" : [ "http://some/path/to/raw/file" ],
         "image-verification" : [
           {
             "hash-algorithm" : "ietf-zerotouch-information:sha-256",
             "hash-value" : "ba:ec:cf:a5:67:82:b4:10:77:c6:67:a6:22:ab:\
   7d:50:04:a7:8b:8f:0e:db:02:8b:f4:75:55:fb:c1:13:b2:33"
           }
         ]
       },
       "configuration-handling" : "merge",
       "pre-configuration-script" : "base64encodedvalue==",
       "configuration" : "base64encodedvalue==",
       "post-configuration-script" : "base64encodedvalue=="
     }
   }




Watsen, et al.           Expires August 31, 2018               [Page 26]


Internet-Draft                 Zero Touch                  February 2018


6.3.  YANG Module

   The zero touch information data model is defined by the YANG module
   presented in this section.

   Note: the module defined herein uses data types defined in [RFC5280],
   [RFC6234], and [RFC6991], and an extension statement from
   [I-D.ietf-netmod-yang-data-ext], and an encoding defined in
   [ITU.X690.1994].

 <CODE BEGINS> file "ietf-zerotouch-information@2018-02-28.yang"
 module ietf-zerotouch-information {
   yang-version 1.1;
   namespace "urn:ietf:params:xml:ns:yang:ietf-zerotouch-information";
   prefix zti;

   import ietf-yang-types {
     prefix yang;
     reference "RFC 6991: Common YANG Data Types";
   }
   import ietf-inet-types {
     prefix inet;
     reference "RFC 6991: Common YANG Data Types";
   }
   import ietf-yang-data-ext {
     prefix yd;
     reference "I-D.ietf-netmod-yang-data-ext: YANG Data Extensions";
   }

   organization
     "IETF NETCONF (Network Configuration) Working Group";

   contact
     "WG Web:   http://tools.ietf.org/wg/netconf
      WG List:  <mailto:netconf@ietf.org>
      Author:   Kent Watsen <mailto:kwatsen@juniper.net>";

   description
     "This module defines the data model for the Zero Touch Information
      artifact defined in RFC XXXX: Zero Touch Provisioning for
      Networking Devices.

      The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL',
      'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED', 'MAY',
      and 'OPTIONAL' in the module text are to be interpreted as
      described in RFC 2119.

      Copyright (c) 2018 IETF Trust and the persons identified as



Watsen, et al.           Expires August 31, 2018               [Page 27]


Internet-Draft                 Zero Touch                  February 2018


      authors of the code. All rights reserved.

      Redistribution and use in source and binary forms, with or
      without modification, is permitted pursuant to, and subject
      to the license terms contained in, the Simplified BSD License
      set forth in Section 4.c of the IETF Trust's Legal Provisions
      Relating to IETF Documents (http://trustee.ietf.org/license-info)

      This version of this YANG module is part of RFC XXXX; see the
      RFC itself for full legal notices.";

   revision 2018-02-28 {
     description
       "Initial version";
     reference
       "RFC XXXX: Zero Touch Provisioning for Networking Devices";
   }

   // identities

   identity hash-algorithm {
     description
       "A base identity for hash algorith verification";
   }

   identity sha-256 {
     base "hash-algorithm";
     description "The SHA-256 algorithm.";
     reference "RFC 6234: US Secure Hash Algorithms.";
   }

   // typedefs

   typedef cms {
     type binary;
     description
       "A CMS structure, as specified in RFC 5652, encoded using
        ASN.1 distinguished encoding rules (DER), as specified in
        ITU-T X.690.";
     reference
       "RFC 5652:
          Cryptographic Message Syntax (CMS)
        ITU-T X.690:
          Information technology - ASN.1 encoding rules:
          Specification of Basic Encoding Rules (BER),
          Canonical Encoding Rules (CER) and Distinguished
          Encoding Rules (DER).";
   }



Watsen, et al.           Expires August 31, 2018               [Page 28]


Internet-Draft                 Zero Touch                  February 2018


   // yang-data

   yd:yang-data "zerotouch-information" {
     choice information-type {
       mandatory true;
       description
         "This choice statement ensures the response contains
          redirect-information or onboarding-information.";
       container redirect-information {
         description
           "Redirect information is described in Section 2.1 in
            RFC XXXX.  Its purpose is to redirect a device to
            another bootstrap server.";
         reference
           "RFC XXXX: Zero Touch Provisioning for Networking Devices";
         list bootstrap-server {
           key "address";
           min-elements 1;
           description
             "A bootstrap server entry.";
           leaf address {
             type inet:host;
             mandatory true;
             description
               "The IP address or hostname of the bootstrap server the
                device should redirect to.";
           }
           leaf port {
             type inet:port-number;
             default "443";
             description
               "The port number the bootstrap server listens on.  If no
                port is specified, the IANA-assigned port for 'https'
                (443) is used.";
           }
           leaf trust-anchor {
             type cms;
             description
               "A CMS structure that MUST contain the chain of X.509
                certificates needed to authenticate the TLS certificate
                presented by this bootstrap server.  In all cases, the
                chain MUST include a self-signed root certificate.
                In the case where the root certificate is itself the
                issuer of the bootstrap server's TLS certificate, only
                one X.509 certificate is present.  If needed by the
                device, this CMS structure MAY also contain suitably
                fresh CRL and/or OCSP Responses with which the device
                can use to verify the revocation status of the



Watsen, et al.           Expires August 31, 2018               [Page 29]


Internet-Draft                 Zero Touch                  February 2018


                certificates.

                X.509 certificates and CRLs are described in RFC 5280.
                OCSP Responses are described in RFC 6960.";
             reference
               "RFC 5280:
                  Internet X.509 Public Key Infrastructure Certificate
                  and Certificate Revocation List (CRL) Profile.
                RFC 6960:
                  X.509 Internet Public Key Infrastructure Online
                  Certificate Status Protocol - OCSP.";
           }
         }
       }
       container onboarding-information {
         description
           "Onboarding information is described in Section 2.2 in
            RFC XXXX.  Its purpose is to provide the device everything
            it needs to bootstrap itself.";
         reference
           "RFC XXXX: Zero Touch Provisioning for Networking Devices";
         container boot-image {
           description
             "Specifies criteria for the boot image the device MUST
              be running, as well as information enabling the device
              to install the required boot image.";
           leaf os-name {
             type string;
             description
               "The name of the operating system software the device
                MUST be running in order to not require a software
                image upgrade (ex. VendorOS).";
           }
           leaf os-version {
             type string;
             description
               "The version of the operating system software the device
                MUST be running in order to not require a software
                image upgrade (ex. 17.3R2.1).";
           }
           leaf-list download-uri {
             type inet:uri;
             must '../image-verification' {
               description
                 "Image verification information must be provided if
                  the device is going to download an image.";
             }
             ordered-by user;



Watsen, et al.           Expires August 31, 2018               [Page 30]


Internet-Draft                 Zero Touch                  February 2018


             description
               "An ordered list of URIs to where the necessary
                boot-image file may be obtained.  Deployments must
                know through out-of-band means which URI schemes
                (http, ftp, etc.) the bootstrapping device supports.
                If a secure scheme (e.g., https) is provided, a
                device MAY establish an untrusted connection to the
                remote server to obtain the boot-image.";
           }
           list image-verification {
             must '../download-uri' {
               description
                 "Download URIs must be provided if an image is to
                  be verified.";
             }
             key hash-algorithm;
             description
               "A list of hash values that a device can use to verify
                boot image files with.";
             leaf hash-algorithm {
               type identityref {
                 base "hash-algorithm";
               }
               description
                 "Identifies the hash algorithm used.";
             }
             leaf hash-value {
               type yang:hex-string;
               mandatory true;
               description
                 "The hex-encoded value of the specified hash algorithm
                  over the contents of the boot image file.";
             }
           }
         }
         leaf configuration-handling {
           type enumeration {
             enum "merge" {
               description
                 "Merge configuration into the running datastore.";
             }
             enum "replace" {
               description
                 "Replace the existing running datastore with the
                  passed configuration.";
             }
           }
           must '../configuration';



Watsen, et al.           Expires August 31, 2018               [Page 31]


Internet-Draft                 Zero Touch                  February 2018


           description
             "This enumeration indicates how the server should process
              the provided configuration.";
         }
         leaf pre-configuration-script {
           type script;
           description
             "A script that, when present, is executed before the
              configuration has been processed.";
         }
         leaf configuration {
           type binary;
           must '../configuration-handling';
           description
             "Any configuration known to the device.  The use of the
              'binary' type enables e.g., XML-content to be embedded
              into a JSON document.  The exact encoding of the content,
              as with the scripts, is vendor specific.";
         }
         leaf post-configuration-script {
           type script;
           description
             "A script that, when present, is executed after the
              configuration has been processed.";
         }
       }
     }
   }

   typedef script {
     type binary;
     description
       "A device specific script that enables the execution of
        commands to perform actions not possible thru configuration
        alone.

        No attempt is made to standardize the contents, running
        context, or programming language of the script, other than
        that it can emit an exit status code and stderr/sdtout.  The
        contents of the script are considered specific to the vendor,
        product line, and/or model of the device.

        If a script is erroneously provided to a device that does
        not support the execution of scripts, and the device obtained
        the onboarding information from a trusted bootstrap server,
        the device SHOULD send either a 'pre-script-warning' or
        'post-script-warning' progress report, based on which kind of
        script was presented, but otherwise continue processing the



Watsen, et al.           Expires August 31, 2018               [Page 32]


Internet-Draft                 Zero Touch                  February 2018


        bootstrapping data as if the script had not been present.

        The script returns exit status code zero on success and non-zero
        otherwise, with accompanying stderr/stdout for logging purposes.

        If the exit status code is greater than zero, then the device
        should assume that the script had a soft error, which the
        script believes does not affect manageability.  If the device
        obtained the bootstrap information from a trusted bootstrap
        server, it SHOULD either send a 'pre-script-warning' or
        'post-script-warning' progress report, based on which kind of
        script was executed.

        If the exit status code is less than zero, the device should
        assume the script had a hard error, which the script believes
        will affect manageability.  If the device obtained the
        bootstrap information from a trusted bootstrap server, it
        SHOULD send a 'pre-script-error' or 'post-script-error'
        progress report,  based on which kind of script was executed,
        followed by a reset that will wipe out any bad state left by
        the script, and restart the entire bootstrapping process.";
   }
 }
 <CODE ENDS>

7.  The Zero Touch Bootstrap Server API

   This section defines the API for bootstrap servers.  The API is
   defined as that produced by a RESTCONF [RFC8040] server that supports
   the YANG 1.1 [RFC7950] module defined in this section.

7.1.  API Overview

   The following tree diagram provides an overview for the bootstrap
   server RESTCONF API.
















Watsen, et al.           Expires August 31, 2018               [Page 33]


Internet-Draft                 Zero Touch                  February 2018


   module: ietf-zerotouch-bootstrap-server

     rpcs:
       +---x get-bootstrapping-data
       |  +---w input
       |  |  +---w untrusted-connection?   empty
       |  |  +---w hw-model?               string
       |  |  +---w os-name?                string
       |  |  +---w os-version?             string
       |  |  +---w nonce?                  binary
       |  +--ro output
       |     +--ro zerotouch-information    cms
       |     +--ro owner-certificate?       cms
       |     +--ro ownership-voucher?       cms
       +---x report-progress
          +---w input
             +---w progress-type    enumeration
             +---w message?         string
             +---w ssh-host-keys
             |  +---w ssh-host-key* []
             |     +---w format      enumeration
             |     +---w key-data    string
             +---w trust-anchors
                +---w trust-anchor* []
                   +---w certificate    cms

7.2.  Example Usage

   This section presents three examples illustrating the bootstrap
   server's API.  Two examples are provided for the 'get-bootstrapping-
   data' RPC (once to an untrusted bootstrap server, and again to a
   trusted bootstrap server), and one example for the 'report-progress'
   RPC.

   The following example illustrates a device using the API to fetch its
   bootstrapping data from a untrusted bootstrap server.  In this
   example, the device sends the 'untrusted-connection' input parameter
   and receives signed data in the response.













Watsen, et al.           Expires August 31, 2018               [Page 34]


Internet-Draft                 Zero Touch                  February 2018


REQUEST
-------
['\' line wrapping added for formatting only]

POST /restconf/operations/ietf-zerotouch-bootstrap-server:get-boot\
strapping-data HTTP/1.1
HOST: example.com
Content-Type: application/yang.data+xml

<input
  xmlns="urn:ietf:params:xml:ns:yang:ietf-zerotouch-bootstrap-server">
  <untrusted-connection/>
</input>


RESPONSE
--------

HTTP/1.1 200 OK
Date: Sat, 31 Oct 2015 17:02:40 GMT
Server: example-server
Content-Type: application/yang.data+xml

<output xmlns="urn:ietf:params:xml:ns:yang:ietf-zerotouch-bootstrap-server">
  <zerotouch-information>base64encodedvalue==</zerotouch-information>
  <owner-certificate>base64encodedvalue==</owner-certificate>
  <ownership-voucher>base64encodedvalue==</ownership-voucher>
</output>

   The following example illustrates a device using the API to fetch its
   bootstrapping data from a trusted bootstrap server.  In this example,
   the device sends addition input parameters to the bootstrap server,
   which it may use when formulating its response to the device.


















Watsen, et al.           Expires August 31, 2018               [Page 35]


Internet-Draft                 Zero Touch                  February 2018


REQUEST
-------
['\' line wrapping added for formatting only]

POST /restconf/operations/ietf-zerotouch-bootstrap-server:get-boot\
strapping-data HTTP/1.1
HOST: example.com
Content-Type: application/yang.data+xml

<input
  xmlns="urn:ietf:params:xml:ns:yang:ietf-zerotouch-bootstrap-server">
  <hw-model>model-x</hw-model>
  <os-name>vendor-os</os-name>
  <os-version>17.3R2.1</os-version>
  <nonce>base64encodedvalue==</nonce>
</input>

RESPONSE
--------

HTTP/1.1 200 OK
Date: Sat, 31 Oct 2015 17:02:40 GMT
Server: example-server
Content-Type: application/yang.data+xml

<output xmlns="urn:ietf:params:xml:ns:yang:ietf-zerotouch-bootstrap-server">
  <zerotouch-information>base64encodedvalue==</zerotouch-information>
</output>


   The following example illustrates a device using the API to post a
   progress report to a bootstrap server.  Illustrated below is the
   'bootstrap-complete' message, but the device may send other progress
   reports to the server while bootstrapping.  In this example, the
   device is sending both its SSH host keys and a TLS server
   certificate, which the bootstrap server may, for example, pass to an
   NMS, as discussed in Appendix A.3.














Watsen, et al.           Expires August 31, 2018               [Page 36]


Internet-Draft                 Zero Touch                  February 2018


   REQUEST
   -------
   ['\' line wrapping added for formatting only]

   POST /restconf/operations/ietf-zerotouch-bootstrap-server:report-\
   progress HTTP/1.1
   HOST: example.com
   Content-Type: application/yang.data+xml

   <input xmlns=
     "urn:ietf:params:xml:ns:yang:ietf-zerotouch-bootstrap-server">
     <progress-type>bootstrap-complete</progress-type>
     <message>example message</message>
     <ssh-host-keys>
       <ssh-host-key>
         <format>ssh-rsa</format>
         <key-data>base64encodedvalue==</key-data>
       </ssh-host-key>
       <ssh-host-key>
         <format>ssh-dss</format>
         <key-data>base64encodedvalue==</key-data>
       </ssh-host-key>
     </ssh-host-keys>
     <trust-anchors>
       <trust-anchor>
         <certificate>base64encodedvalue==</certificate>
       </trust-anchor>
     </trust-anchors>
   </input>

   RESPONSE
   --------

   HTTP/1.1 204 No Content
   Date: Sat, 31 Oct 2015 17:02:40 GMT
   Server: example-server

7.3.  YANG Module

   The bootstrap server's device-facing API is normatively defined by
   the YANG module defined in this section.

   Note: the module defined herein uses data types defined in [RFC5652],
   [RFC5280], [RFC6960], and [I-D.ietf-anima-voucher], and uses an
   encoding defined in [ITU.X690.1994].

  <CODE BEGINS> file "ietf-zerotouch-bootstrap-server@2018-02-28.yang"
  module ietf-zerotouch-bootstrap-server {



Watsen, et al.           Expires August 31, 2018               [Page 37]


Internet-Draft                 Zero Touch                  February 2018


    yang-version 1.1;
    namespace
      "urn:ietf:params:xml:ns:yang:ietf-zerotouch-bootstrap-server";
    prefix ztbs;

    organization
      "IETF NETCONF (Network Configuration) Working Group";

    contact
      "WG Web:   <http://tools.ietf.org/wg/netconf/>
       WG List:  <mailto:netconf@ietf.org>
       Author:   Kent Watsen <mailto:kwatsen@juniper.net>";

    description
      "This module defines an interface for bootstrap servers, as
       defined by RFC XXXX: Zero Touch Provisioning for Networking
       Devices.

       The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL',
       'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED', 'MAY',
       and 'OPTIONAL' in the module text are to be interpreted as
       described in RFC 2119.

       Copyright (c) 2018 IETF Trust and the persons identified as
       authors of the code. All rights reserved.

       Redistribution and use in source and binary forms, with or
       without modification, is permitted pursuant to, and subject
       to the license terms contained in, the Simplified BSD License
       set forth in Section 4.c of the IETF Trust's Legal Provisions
       Relating to IETF Documents (http://trustee.ietf.org/license-info)

       This version of this YANG module is part of RFC XXXX; see the
       RFC itself for full legal notices.";

    revision 2018-02-28 {
      description
        "Initial version";
      reference
        "RFC XXXX: Zero Touch Provisioning for Networking Devices";
    }

    // typedefs

    typedef cms {
      type binary;
      description
        "A CMS structure, as specified in RFC 5652, encoded using



Watsen, et al.           Expires August 31, 2018               [Page 38]


Internet-Draft                 Zero Touch                  February 2018


         ASN.1 distinguished encoding rules (DER), as specified in
         ITU-T X.690.";
      reference
        "RFC 5652:
           Cryptographic Message Syntax (CMS)
         ITU-T X.690:
           Information technology - ASN.1 encoding rules:
           Specification of Basic Encoding Rules (BER),
           Canonical Encoding Rules (CER) and Distinguished
           Encoding Rules (DER).";
    }

    // RPCs

    rpc get-bootstrapping-data {
      description
        "This RPC enables a device, as identified by the RESTCONF
         username, to obtain bootstrapping data that has been made
         available for it.";
      input {
        leaf untrusted-connection {
          type empty;
          description
            "This optional input parameter enables a device to
             communicate to the bootstrap server that it is unable to
             authenticate the bootstrap server's TLS certificate.  In
             such circumstances, the device likely does not send any
             of the other input parameters.  Upon receiving this input
             parameter, the bootstrap server should return unsigned
             redirect information or signed data of any type.";
        }
        leaf hw-model {
          type string;
          description
            "This optional input parameter enables a device to
             communicate to the bootstrap server its vendor specific
             hardware model number.  This parameter may be needed,
             for instance, when a device's IDevID certificate does
             not include the 'hardwareModelName' value in its
             subjectAltName field, as is allowed by 802.1AR-2009.";
          reference
            "IEEE 802.1AR-2009: IEEE Standard for Local and
               metropolitan area networks - Secure Device Identity";
        }
        leaf os-name {
          type string;
          description
            "This optional input parameter enables a device to



Watsen, et al.           Expires August 31, 2018               [Page 39]


Internet-Draft                 Zero Touch                  February 2018


             communicate to the bootstrap server the name of its
             operating system.  This parameter may be useful if
             the device, as identified by its serial number, can
             run more than one type of operating system (e.g.,
             on a white-box system.";
        }
        leaf os-version {
          type string;
          description
            "This optional input parameter enables a device to
             communicate to the bootstrap server the version of its
             operating system.  This parameter may be used by a
             bootstrap server to return an operating system specific
             response to the device, thus negating the need for a
             potentially expensive boot-image update.";
        }
        leaf nonce {
          type binary {
            length "8..32";
          }
          description
            "This optional input parameter enables a device to
             communicate to the bootstrap server a nonce value.
             This may be especially useful for devices lacking
             an accurate clock, as then the bootstrap server
             can dynamically obtain from the manufacturer a
             voucher with the nonce value in it, as described
             in I-D.ietf-anima-voucher.";
          reference
            "RFC ZZZZ: Voucher Profile for Bootstrapping Protocols.";
        }
      }
      output {
        leaf zerotouch-information {
          type cms;
          mandatory true;
          description
            "A 'zerotouch-information' artifact, as described in
             Section 4.1 of RFC XXXX.  The CMS structure may either
             contain just a contentInfo structure, with effectively
             unsigned data, or a SignedData structure (per Section
             5.1 of RFC 5652) that signs the content using the
             private key associated with the 'owner-certificate'.";
          reference
            "RFC XXXX:
                Zero Touch Provisioning for Networking Devices
             RFC 5652:
                Cryptographic Message Syntax (CMS)";



Watsen, et al.           Expires August 31, 2018               [Page 40]


Internet-Draft                 Zero Touch                  February 2018


        }
        leaf owner-certificate {
          type cms;
          must '../ownership-voucher' {
            description
              "An ownership voucher must be present whenever an owner
               certificate is presented.";
          }
          description
            "This CMS structure MUST contain the owner certificate
             and all intermediate certificates leading up to (and
             optionally including) the trust anchor certificate
             specified by the 'pinned-domain-cert' node in the
             ownership voucher.  This structure MAY also include
             suitably fresh CRL and/or OCSP Responses that the
             device can use to verify the revocation status of the
             certificates.  This leaf is optional because it is
             only needed when the 'zerotouch-information' CMS
             structure is signed.";
          reference
            "RFC 5652:
               Cryptographic Message Syntax (CMS)
             RFC 5280:
               Internet X.509 Public Key Infrastructure Certificate
               and Certificate Revocation List (CRL) Profile.
             RFC 6960:
               X.509 Internet Public Key Infrastructure Online
               Certificate Status Protocol - OCSP.
             ITU-T X.690:
               Information technology - ASN.1 encoding rules:
               Specification of Basic Encoding Rules (BER),
               Canonical Encoding Rules (CER) and Distinguished
               Encoding Rules (DER).";
        }
        leaf ownership-voucher {
          type cms;
          must '../owner-certificate' {
            description
              "An owner certificate must be present whenever an
               ownership voucher is presented.";
          }
          description
            "A 'voucher' artifact, as described in Section 5 of
             I-D.ietf-anima-voucher.  The voucher informs the device
             who its owner is.  The voucher encodes the device's
             serial number, so that the device can ensure the
             voucher applies to it.  The voucher is signed by the
             device's manufacturer.  This leaf is optional because



Watsen, et al.           Expires August 31, 2018               [Page 41]


Internet-Draft                 Zero Touch                  February 2018


             it is only needed when the 'zerotouch-information'
             CMS structure is signed.";
          reference
            "I-D.ietf-anima-voucher:
               Voucher and Voucher Revocation Profiles for
               Bootstrapping Protocols";
        }
      }
    }

    rpc report-progress {
      description
        "This RPC enables a device, as identified by the RESTCONF
         username, to report its bootstrapping progress to the
         bootstrap server.  This RPC is expected to be used when
         the device obtains onboarding-information from a trusted
         bootstap server.";
      input {
        leaf progress-type {
          type enumeration {
            enum "bootstrap-initiated" {
              description
                "Indicates that the device just used the
                 'get-bootstrapping-data' RPC.  The 'message' node
                 below MAY contain any additional information that
                 the manufacturer thinks might be useful.";
            }
            enum "parsing-warning" {
              description
                "Indicates that the device had a non-fatal error when
                 parsing the response from the bootstrap server.  The
                 'message' node below SHOULD indicate the specific
                 warning that occurred.";
            }
            enum "parsing-error" {
              description
                "Indicates that the device encountered a fatal error
                 when parsing the response from the bootstrap server.
                 For instance, this could be due to malformed encoding,
                 the device expecting signed data when only unsigned
                 data is provided, the ownership voucher not listing
                 the device's serial number, or because the signature
                 didn't match.  The 'message' node below SHOULD indicate
                 the specific error.  This progress type also indicates
                 that the device has abandoned trying to bootstrap
                 off this bootstrap server.";
            }
            enum "boot-image-warning" {



Watsen, et al.           Expires August 31, 2018               [Page 42]


Internet-Draft                 Zero Touch                  February 2018


              description
                "Indicates that the device encountered a non-fatal
                 error condition when trying to install a boot-image.
                 A possible reason might include a need to reformat a
                 partition causing loss of data.  The 'message' node
                 below SHOULD indicate any warning messages that were
                 generated.";
            }
            enum "boot-image-error" {
              description
                "Indicates that the device encountered an error when
                 trying to install a boot-image, which could be for
                 reasons such as a file server being unreachable,
                 file not found, signature mismatch, etc.  The
                 'message' node SHOULD indicate the specific error
                 that occurred.  This progress type also indicates
                 that the device has abandoned trying to bootstrap
                 off this bootstrap server.";
            }
            enum "pre-script-warning" {
              description
                "Indicates that the device obtained a greater than
                 zero exit status code from the script when it was
                 executed.  The 'message' node below SHOULD indicate
                 both the resulting exit status code, as well as
                 capture any stdout/stderr messages the script may
                 have produced.";
            }
            enum "pre-script-error" {
              description
                "Indicates that the device obtained a less than
                 zero exit status code from the script when it was
                 executed.  The 'message' node below SHOULD indicate
                 both the resulting exit status code, as well as
                 capture any stdout/stderr messages the script may
                 have produced.  This progress type also indicates
                 that the device has abandoned trying to bootstrap
                 off this bootstrap server.";
            }
            enum "config-warning" {
              description
                "Indicates that the device obtained warning messages
                 when it committed the initial configuration.  The
                 'message' node below SHOULD indicate any warning
                 messages that were generated.";
            }
            enum "config-error" {
              description



Watsen, et al.           Expires August 31, 2018               [Page 43]


Internet-Draft                 Zero Touch                  February 2018


                "Indicates that the device obtained error messages
                 when it committed the initial configuration.  The
                 'message' node below SHOULD indicate the error
                 messages that were generated.  This progress type
                 also indicates that the device has abandoned trying
                 to bootstrap off this bootstrap server.";
            }
            enum "post-script-warning" {
              description
                "Indicates that the device obtained a greater than
                 zero exit status code from the script when it was
                 executed.  The 'message' node below SHOULD indicate
                 both the resulting exit status code, as well as
                 capture any stdout/stderr messages the script may
                 have produced.";
            }
            enum "post-script-error" {
              description
                "Indicates that the device obtained a less than
                 zero exit status code from the script when it was
                 executed.  The 'message' node below SHOULD indicate
                 both the resulting exit status code, as well as
                 capture any stdout/stderr messages the script may
                 have produced.  This progress type also indicates
                 that the device has abandoned trying to bootstrap
                 off this bootstrap server.";
            }
            enum "bootstrap-complete" {
              description
                "Indicates that the device successfully processed all
                 'onboarding-information' provided, and that it is ready
                 to be managed.  The 'message' node below MAY contain
                 any additional information that the manufacturer thinks
                 might be useful.  After sending this progress type,
                 the device is not expected to access the bootstrap
                 server again.";
            }
            enum "informational" {
              description
                "Indicates any additional information not captured
                 by any of the other progress types. For instance, a
                 message indicating that the device is about to
                 reboot after having installed a boot-image could
                 be provided.  The 'message' node below SHOULD
                 contain information that the manufacturer thinks
                 might be useful.";
            }
          }



Watsen, et al.           Expires August 31, 2018               [Page 44]


Internet-Draft                 Zero Touch                  February 2018


          mandatory true;
          description
            "The type of progress report provided.";
        }
        leaf message {
          type string;
          description
            "An optional arbitrary value.";
        }
        container ssh-host-keys {
          when "../progress-type = 'bootstrap-complete'" {
            description
              "SSH host keys are only sent when the progress type
               is 'bootstrap-complete'.";
          }
          description
            "A list of trust anchor certificates an NMS may use to
             authenticate subsequent SSH-based connections to this
             device (e.g., netconf-ssh, netconf-ch-ssh).";
          list ssh-host-key {
            description
              "An SSH host-key.";
            leaf format {
              type enumeration {
                enum "ssh-dss" {
                  description
                    "The SSH host key is a ssh-dss based key.";
                }
                enum "ssh-rsa" {
                  description
                    "The SSH host key is a ssh-rsa based key.";
                }
              }
              mandatory true;
              description
                "The format of the SSH host key.";
            }
            leaf key-data {
              type string;
              mandatory true;
              description
                "The key data for the SSH host key";
            }
          }
        }
        container trust-anchors {
          when "../progress-type = 'bootstrap-complete'" {
            description



Watsen, et al.           Expires August 31, 2018               [Page 45]


Internet-Draft                 Zero Touch                  February 2018


              "Trust anchors are only sent when the progress type
               is 'bootstrap-complete'.";
          }
          description
            "A list of trust anchor certificates an NMS may use to
             authenticate subsequent certificate-based connections
             to this device (e.g., restconf-tls, netconf-tls, or
             even netconf-ssh with X.509 support from RFC 6187).
             In practice, trust anchors for IDevID certificates do
             not need to be conveyed using this mechanism.";
          reference
            "RFC 6187:
               X.509v3 Certificates for Secure Shell Authentication.";
          list trust-anchor {
            description
              "A trust anchor.";
            leaf certificate {
              type cms;
              mandatory true;
              description
                "An X.509 v3 certificate structure, as specified
                 by Section 4 in RFC 5280, encoded using ASN.1
                 distinguished encoding rules (DER), as specified
                 in ITU-T X.690.";
              reference
                "RFC 5280:
                   Internet X.509 Public Key Infrastructure
                   Certificate and Certificate Revocation List (CRL)
                   Profile.
                 ITU-T X.690:
                    Information technology - ASN.1 encoding rules:
                    Specification of Basic Encoding Rules (BER),
                    Canonical Encoding Rules (CER) and Distinguished
                    Encoding Rules (DER).";
            }
          }
        }
      }
    }
  }
  <CODE ENDS>

8.  The Zero Touch Device Data Model

   This section defines a non-normative data model that enables the
   configuration of zerotouch bootstrapping and discovery of what
   parameters are used by a device's bootstrapping logic.




Watsen, et al.           Expires August 31, 2018               [Page 46]


Internet-Draft                 Zero Touch                  February 2018


8.1.  Data Model Overview

   The following tree diagram provides an overview for the zerotouch
   device data model.

   module: example-zerotouch-device
     +--rw zerotouch
        +--rw enabled?                                boolean
        +--ro idevid-certificate?                     cms
        |       {bootstrap-servers}?
        +--ro bootstrap-servers {bootstrap-servers}?
        |  +--ro bootstrap-server* [address]
        |     +--ro address    inet:host
        |     +--ro port?      inet:port-number
        +--ro bootstrap-server-pinned-certificates?
        |       -> /ks:keystore/pinned-certificates/name
        |       {bootstrap-servers}?
        +--ro voucher-pinned-certificates?
                -> /ks:keystore/pinned-certificates/name {signed-data}?

   In the above diagram, notice that there is only one configurable node
   'enabled'.  The expectation is that this node would be set to 'true'
   in device's factory default configuration and that it would either be
   set to 'false' or deleted when the zerotouch bootstrapping is longer
   needed.

8.2.  Example Usage

   Following is an instance example for this data model.






















Watsen, et al.           Expires August 31, 2018               [Page 47]


Internet-Draft                 Zero Touch                  February 2018


   [note: '\' line wrapping for formatting only]

   <zerotouch
     xmlns="https://example.com/zerotouch-device">
     <enabled>true</enabled>
     <idevid-certificate>base64encodedvalue==</idevid-certificate>
     <bootstrap-servers>
       <bootstrap-server>
         <address>phs1.example.com</address>
         <port>8443</port>
       </bootstrap-server>
       <bootstrap-server>
         <address>phs2.example.com</address>
         <port>8443</port>
       </bootstrap-server>
       <bootstrap-server>
         <address>phs3.example.com</address>
         <port>8443</port>
       </bootstrap-server>
     </bootstrap-servers>
     <bootstrap-server-pinned-certificates>manufacturers-root-ca-certs<\
   /bootstrap-server-pinned-certificates>
     <voucher-pinned-certificates>manufacturers-root-ca-certs</voucher-\
   pinned-certificates>
   </zerotouch>

8.3.  YANG Module

   The device model is defined by the YANG module defined in this
   section.

   Note: the module defined herein uses data types defined in [RFC5652],
   [RFC6991], and [I-D.ietf-netconf-keystore], and uses an encoding
   defined in [ITU.X690.1994].

 module example-zerotouch-device {
   yang-version 1.1;
   namespace "https://example.com/zerotouch-device";
   prefix ztd;

   import ietf-inet-types {
     prefix inet;
     reference "RFC 6991: Common YANG Data Types";
   }
   import ietf-keystore {
     prefix ks;
     revision-date 2017-10-30;
     description



Watsen, et al.           Expires August 31, 2018               [Page 48]


Internet-Draft                 Zero Touch                  February 2018


      "This revision is defined in draft-ietf-netconf-keystore-04.";
     reference
      "I-D.ietf-netconf-keystore:
         YANG Data Model for a Keystore Mechanism";
   }

   organization
     "IETF NETCONF (Network Configuration) Working Group";

   contact
     "WG Web:   <http://tools.ietf.org/wg/netconf/>
      WG List:  <mailto:netconf@ietf.org>
      Author:   Kent Watsen <mailto:kwatsen@juniper.net>";

   description
     "This module defines a data model to enable zerotouch
      bootstrapping and discover what parameters are used.

      Copyright (c) 2018 IETF Trust and the persons identified as
      authors of the code. All rights reserved.

      Redistribution and use in source and binary forms, with or
      without modification, is permitted pursuant to, and subject
      to the license terms contained in, the Simplified BSD License
      set forth in Section 4.c of the IETF Trust's Legal Provisions
      Relating to IETF Documents (http://trustee.ietf.org/license-info)

      This version of this YANG module is part of RFC XXXX; see the
      RFC itself for full legal notices.";

   revision 2018-02-28 {
     description
       "Initial version";
     reference
       "RFC XXXX: Zero Touch Provisioning for for Networking Devices";
   }

   // features

   feature bootstrap-servers {
     description
       "The device supports bootstrapping off bootstrap servers.";
   }

   feature signed-data {
     description
       "The device supports bootstrapping off signed data.";
   }



Watsen, et al.           Expires August 31, 2018               [Page 49]


Internet-Draft                 Zero Touch                  February 2018


   // typedefs

   typedef cms {
     type binary;
     description
       "A CMS structure, as specified in RFC 5652, encoded using
        ASN.1 distinguished encoding rules (DER), as specified in
        ITU-T X.690.";
     reference
       "RFC 5652:
          Cryptographic Message Syntax (CMS)
        ITU-T X.690:
          Information technology - ASN.1 encoding rules:
          Specification of Basic Encoding Rules (BER),
          Canonical Encoding Rules (CER) and Distinguished
          Encoding Rules (DER).";
   }

   // protocol accessible nodes

   container zerotouch {
     description
       "Top-level container for zerotouch data model.";
     leaf enabled {
       type boolean;
       default false;
       description
         "The 'enabled' leaf controls if zerotouch bootstrapping is
          enabled or disabled.  The default is 'false' so that, when
          not enabled, which is most of the time, no configuration
          is needed.";
     }
     leaf idevid-certificate {
       if-feature bootstrap-servers;
       type cms;
       config false;
       description
         "An CMS SignedData structure, as specified by Section 5 of
          RFC 5652, encoded using ASN.1 distinguished encoding rules
          (DER), as specified in ITU-T X.690.  This is the degenerate
          form of SignedData, whereby there are no signers, that is
          commonly used to disseminate certificates.</t>

          This structure contains the IEEE 802.1AR-2009 IDevID
          certificate itself, and all intermediate certificates leading
          up to, and optionally including, the manufacturer's well-known
          trust anchor certificate for IDevID certificates.  The well-
          known trust anchor may not be a self-signed certificate.";



Watsen, et al.           Expires August 31, 2018               [Page 50]


Internet-Draft                 Zero Touch                  February 2018


       reference
         "RFC 5652:
            Cryptographic Message Syntax (CMS)
          ITU-T X.690:
            Information technology - ASN.1 encoding rules:
            Specification of Basic Encoding Rules (BER),
            Canonical Encoding Rules (CER) and Distinguished
            Encoding Rules (DER).
          IEEE 802.1AR-2009:
            IEEE Standard for Local and metropolitan area
            networks - Secure Device Identity.";
     }
     container bootstrap-servers {
       if-feature bootstrap-servers;
       config false;
       description
         "List of bootstrap servers this device will attempt
          to reach out to when bootstrapping.";
       list bootstrap-server {
         key "address";
         description
           "A bootstrap server entry.";
         leaf address {
           type inet:host;
           mandatory true;
           description
             "The IP address or hostname of the bootstrap server the
              device should redirect to.";
         }
         leaf port {
           type inet:port-number;
           default "443";
           description
             "The port number the bootstrap server listens on.  If no
              port is specified, the IANA-assigned port for 'https'
              (443) is used.";
         }
       }
     }
     leaf bootstrap-server-pinned-certificates {
       if-feature bootstrap-servers;
       type leafref {
         path "/ks:keystore/ks:pinned-certificates/ks:name";
       }
       config false;
       description
         "A reference to a list of pinned certificate authority (CA)
          certificates that the device uses to validate bootstrap



Watsen, et al.           Expires August 31, 2018               [Page 51]


Internet-Draft                 Zero Touch                  February 2018


          servers with.";
     }
     leaf voucher-pinned-certificates {
       if-feature signed-data;
       type leafref {
         path "/ks:keystore/ks:pinned-certificates/ks:name";
       }
       config false;
       description
         "A reference to a list of pinned certificate authority (CA)
          certificates that the device uses to validate ownership
          vouchers with.";
     }
   }
 }


9.  DHCP Zero Touch Options

   This section defines two DHCP options, one for DHCPv4 and one for
   DHCPv6.  These two options are semantically the same, though
   syntactically different.

9.1.  DHCPv4 Zero Touch Option

   The DHCPv4 Zero Touch Option is used to provision the client with one
   or more URIs for bootstrap servers that can be contacted to attempt
   further configuration.

      DHCPv4 Zero Touch Redirect Option

       0                             1
       0  1  2  3  4  5  6  7  8  9  0  1  2  3  4  5
      +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
      |   option-code (143)   |     option-length     |
      +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
      .                                               .
      .    bootstrap-server-list (variable length)    .
      .                                               .
      +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+

      o option-code: OPTION_V4_ZEROTOUCH_REDIRECT (143)
      o option-length: The option length in octets
      o bootstrap-server-list: A list of servers for the
         client to attempt contacting, in order to obtain
         further bootstrapping data, in the format shown
         in [common-field-encoding].




Watsen, et al.           Expires August 31, 2018               [Page 52]


Internet-Draft                 Zero Touch                  February 2018


   DHCPv4 Client Behavior

   Clients MAY request the OPTION_V4_ZEROTOUCH_REDIRECT by including its
   option code in the Parameter Request List (55) in DHCP request
   messages.

   On receipt of a DHCPv4 Reply message which contains the
   OPTION_V4_ZEROTOUCH_REDIRECT, the client processes the response
   according to Section 5.5, with the understanding that the 'address'
   and 'port' values are encoded in the URIs.

   Any invalid URI entries received in the uri-data field are ignored by
   the client.  If OPTION_V4_ZEROTOUCH_REDIRECT does not contain at
   least one valid URI entry in the uri-data field, then the client MUST
   discard the option.

   As the list of URIs may exceed the maximum allowed length of a single
   DHCPv4 option (255 octets), the client MUST implement [RFC3396],
   allowing the URI list to be split across a number of
   OPTION_V4_ZEROTOUCH_REDIRECT option instances.

   DHCPv4 Server Behavior

   The DHCPv4 server MAY include a single instance of Option
   OPTION_V4_ZEROTOUCH_REDIRECT in DHCP messages it sends.  Servers MUST
   NOT send more than one instance of the OPTION_V4_ZEROTOUCH_REDIRECT
   option.

   As the list of URIs may exceed the maximum allowed length of a single
   DHCPv4 option (255 octets), the server MUST implement [RFC3396],
   allowing the URI list to be split across a number of
   OPTION_V4_ZEROTOUCH_REDIRECT option instances.

9.2.  DHCPv6 Zero Touch Option

   The DHCPv6 Zero Touch Option is used to provision the client with one
   or more URIs for bootstrap servers that can be contacted to attempt
   further configuration.













Watsen, et al.           Expires August 31, 2018               [Page 53]


Internet-Draft                 Zero Touch                  February 2018


      DHCPv6 Zero Touch Redirect Option

       0                   1                   2                   3
       0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |       option-code (136)      |          option-length         |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      .           bootstrap-server-list (variable length)             .
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

      o option-code: OPTION_V6_ZEROTOUCH_REDIRECT (136)
      o option-length: The option length in octets
      o bootstrap-server-list: A list of servers for the client to
        attempt contacting, in order to obtain further bootstrapping
        data, in the format shown in [common-field-encoding].

   DHCPv6 Client Behavior

   Clients MAY request the OPTION_V6_ZEROTOUCH_REDIRECT option, as
   defined in [RFC3315], Sections 17.1.1, 18.1.1, 18.1.3, 18.1.4,
   18.1.5, and 22.7.   As a convenience to the reader, we mention here
   that the client includes requested option codes in the Option Request
   Option.

   On receipt of a DHCPv6 Reply message which contains the
   OPTION_V6_ZEROTOUCH_REDIRECT, the client processes the response
   according to Section 5.5, with the understanding that the 'address'
   and 'port' values are encoded in the URIs.

   Any invalid URI entries received in the uri-data field are ignored by
   the client.  If OPTION_V6_ZEROTOUCH_REDIRECT does not contain at
   least one valid URI entry in the uri-data field, then the client MUST
   discard the option.

   DHCPv6 Server Behavior

   Sections 17.2.2 and 18.2 of [RFC3315] govern server operation
   in regard to option assignment.  As a convenience to the reader,
   we mention here that the server will send a particular option code
   only if configured with specific values for that option code and if
   the client requested it.

   Option OPTION_V6_ZEROTOUCH_REDIRECT is a singleton.  Servers MUST NOT
   send more than one instance of the OPTION_V6_ZEROTOUCH_REDIRECT
   option.






Watsen, et al.           Expires August 31, 2018               [Page 54]


Internet-Draft                 Zero Touch                  February 2018


9.3.  Common Field Encoding

   Both of the DHCPv4 and DHCPv6 options defined in this section encode
   a list of bootstrap server URIs.  The "URI" structure is an option
   that can contain multiple URIs (see [RFC7227], Section 5.7).

     bootstrap-server-list:

     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-...-+-+-+-+-+-+-+
     |       uri-length              |          URI                  |
     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-...-+-+-+-+-+-+-+

     o uri-length: variable, in octets.

     o URI: URI of zerotouch bootstrap server, using the HTTPS URI
       scheme defined in Section 2.7.2 of RFC7230.  URI MUST be in
       form "https://<ip-address-or-hostname>[:<port>]".

10.  Security Considerations

10.1.  Immutable storage for trust anchors

   Devices MUST ensure that all their trust anchor certificates,
   including those for connecting to bootstrap servers and verifying
   ownership vouchers, are protected from external modification.

   It may be necessary to update these certificates over time (e.g., the
   manufacturer wants to delegate trust to a new CA).  It is therefore
   expected that devices MAY update these trust anchors when needed
   through a verifiable process, such as a software upgrade using signed
   software images.

10.2.  Clock Sensitivity

   The solution in this document relies on TLS certificates, owner
   certificates, and ownership vouchers, all of which require an
   accurate clock in order to be processed correctly (e.g., to test
   validity dates and revocation status).  Implementations SHOULD ensure
   devices have an accurate clock when shipped from manufacturing
   facilities, and take steps to prevent clock tampering.

   If it is not possible to ensure clock accuracy, it is RECOMMENDED
   that implementations disable the aspects of the solution having clock
   sensitivity.  In particular, such implementations should assume that
   TLS certificates, ownership vouchers, and owner certificates never
   expire and are not revokable.  From an ownership voucher perspective,
   manufacturers SHOULD issue a single ownership voucher for the
   lifetime of such devices.



Watsen, et al.           Expires August 31, 2018               [Page 55]


Internet-Draft                 Zero Touch                  February 2018


   Implementations SHOULD NOT rely on NTP for time, as NTP is not a
   secure protocol.

10.3.  Blindly authenticating a bootstrap server

   This document allows a device to blindly authenticate a bootstrap
   server's TLS certificate.  It does so to allow for cases where the
   redirect information may be obtained in an unsecured manner, which is
   desirable to support in some cases.

   To compensate for this, this document requires that devices, when
   connected to an untrusted bootstrap server, assert that data
   downloaded from the server is signed.

10.4.  Disclosing Information to Untrusted Servers

   This document enables devices to establish provisional connections to
   bootstrap servers, in order for the bootstrap server to provide
   either unsigned redirect information or signed data of any type to
   the device.  However, since the server is untrusted, it may be under
   the control of an adversary, and therefore devices should be cautious
   about the data they send in such cases.

   This document requires devices identify and authenticate themselves
   to untrusted bootstrap servers.  Depending on the authentication
   mechanisms used, this means that, at a minimum, the device's serial
   number may be disclosed to an adversary.  Serial numbers are
   ubiquitous and prominently contained in invoices and on labels
   affixed to devices and their packaging.  That said, serial numbers
   many times encode revealing information, such as the device's model
   number, manufacture date, and/or manufacturing sequence number.
   Knowledge of this information may provide an adversary with details
   needed to launch an attack.

   In addition to the information relayed during the authentication,
   other potentially identifying values that may be disclosed to an
   untrusted server, including 'os-name', 'os-version', 'hw-model', and
   progress reports.  In order to address this issue, it is RECOMMENDED
   that bootstrap server implementations promote the untrusted
   connection to a trusted connection, as described in Appendix B.

10.5.  Sequencing Sources of Bootstrapping Data

   For devices supporting more than one source for bootstrapping data,
   no particular sequencing order has to be observed for security
   reasons, as the solution for each source is considered equally
   secure.  However, from a privacy perspective, it is RECOMMENDED that
   devices access local sources before accessing remote sources.



Watsen, et al.           Expires August 31, 2018               [Page 56]


Internet-Draft                 Zero Touch                  February 2018


10.6.  The "ietf-zerotouch-information" YANG Module

   The ietf-zerotouch-information module defined in this document
   defines a data structure that is always wrapped by a CMS structure.
   When accessed by a secure mechanism (e.g., protected by TLS), then
   the CMS structure may be unsigned.  However, when accessed by an
   insecure mechanism (e.g., removable storage device), then the CMS
   structure must be signed, in order for the device to trust it.

   Implementations should be aware that signed bootstrapping data only
   protects the data from modification, the contents are still visible
   to others.  This doesn't affect Security so much as Privacy.  That
   the contents may be read by unintended parties when accessed by
   insecure mechanisms is considered next.

   The ietf-zerotouch-information module defines a top-level 'choice'
   statement that declares the contents are either "redirect-
   information" or "onboarding-information".  Each of these two cases
   are now considered.

   When the contents of the CMS structure are redirect-information, an
   observer can learn about the bootstrap servers the device is being
   directed, their IP addresses or hostnames, ports, and trust anchor
   certificates.  Knowledge of this information could provide an
   observer some insight into a network's inner structure.

   When the contents of the CMS structure are onboarding-information, as
   observer could learn considerable information about how the device is
   to be provisioned.  This information includes the specific operating
   system version, the initial configuration, and the specific scripts
   that the device is to run.  All of this information should be
   considered highly sensitive and precautions should be taken to
   protect it from falling into the wrong hands.

10.7.  The "ietf-zerotouch-bootstrap-server" YANG Module

   The ietf-zerotouch-bootstrap-server module defined in this document
   specifies an API for a RESTCONF [RFC8040].  The lowest RESTCONF layer
   is HTTPS, and the mandatory-to-implement secure transport is TLS
   [RFC5246].

   The NETCONF Access Control Model (NACM) [RFC6536] provides the means
   to restrict access for particular users to a preconfigured subset of
   all available protocol operations and content.

   This module presents no data nodes (only RPCs).  There is no need to
   discuss the sensitivity of data nodes.




Watsen, et al.           Expires August 31, 2018               [Page 57]


Internet-Draft                 Zero Touch                  February 2018


   This module defines two RPC operations that may be considered
   sensitive in some network environments.  These are the operations and
   their sensitivity/vulnerability:

   get-bootstrapping-data:  This RPC is used by devices to obtain their
       bootstrapping data.  By design, each device, as identified by its
       authentication credentials (e.g. client certificate), can only
       obtain its own data.  NACM is not needed to further constrain
       access to this RPC.

   report-progress:  This RPC is used by devices to report their
       bootstrapping progress.  By design, each device, as identified by
       its authentication credentials (e.g. client certificate), can
       only report data for itself.  NACM is not needed to further
       constrain access to this RPC.

11.  IANA Considerations

11.1.  The IETF XML Registry

   This document registers two URIs in the IETF XML registry [RFC3688].
   Following the format in [RFC3688], the following registrations are
   requested:

   URI: urn:ietf:params:xml:ns:yang:ietf-zerotouch-information
   Registrant Contact: The NETCONF WG of the IETF.
   XML: N/A, the requested URI is an XML namespace.

   URI: urn:ietf:params:xml:ns:yang:ietf-zerotouch-bootstrap-server
   Registrant Contact: The NETCONF WG of the IETF.
   XML: N/A, the requested URI is an XML namespace.

11.2.  The YANG Module Names Registry

   This document registers two YANG modules in the YANG Module Names
   registry [RFC6020].  Following the format defined in [RFC6020], the
   the following registrations are requested:

   name:      ietf-zerotouch-information
   namespace: urn:ietf:params:xml:ns:yang:ietf-zerotouch-information
   prefix:    zti
   reference: RFC XXXX

   name:      ietf-zerotouch-bootstrap-server
   namespace: urn:ietf:params:xml:ns:yang:ietf-zerotouch-bootstrap-\
              server  (note: '\' used for formatting reasons only)
   prefix:    ztbs
   reference: RFC XXXX



Watsen, et al.           Expires August 31, 2018               [Page 58]


Internet-Draft                 Zero Touch                  February 2018


11.3.  The SMI Security for S/MIME CMS Content Type Registry

   IANA is kindly requested to two entries in the "SMI Security for
   S/MIME CMS Content Type" registry (1.2.840.113549.1.9.16.1), with
   values as follows:


             Decimal  Description                             References
             -------  --------------------------------------  ----------
             TBD1      id-ct-zerotouchInformationXML          [RFCXXXX]
             TBD2      id-ct-zerotouchInformationJSON         [RFCXXXX]

11.4.  The BOOTP Manufacturer Extensions and DHCP Options Registry

   IANA is kindly requested to make permanent the following early code
   point allocation in the "BOOTP Manufacturer Extensions and DHCP
   Options" registry maintained at http://www.iana.org/assignments/
   bootp-dhcp-parameters:

   Tag: 143
   Name: OPTION_V4_ZEROTOUCH_REDIRECT
   Data Length: N
   Meaning: This option provides a list of URIs
            for zerotouch bootstrap servers
   Reference: [RFCXXXX]

   And the following early code point allocation in the "Dynamic Host
   Configuration Protocol for IPv6 (DHCPv6)" registry maintained at
   http://www.iana.org/assignments/dhcpv6-parameters:

   Value: 136
   Description: OPTION_V6_ZEROTOUCH_REDIRECT
   Reference: [RFCXXXX]

12.  Acknowledgements

   The authors would like to thank for following for lively discussions
   on list and in the halls (ordered by last name): David Harrington,
   Michael Behringer, Dean Bogdanovic, Martin Bjorklund, Joe Clarke,
   Toerless Eckert, Stephen Farrell, Stephen Hanna, Wes Hardaker, Radek
   Krejci, Russ Mundy, Reinaldo Penno, Randy Presuhn, Max Pritikin,
   Michael Richardson, Phil Shafer, Juergen Schoenwaelder.

   Special thanks goes to Steve Hanna, Russ Mundy, and Wes Hardaker for
   brainstorming the original I-D's solution during the IETF 87 meeting
   in Berlin.





Watsen, et al.           Expires August 31, 2018               [Page 59]


Internet-Draft                 Zero Touch                  February 2018


13.  References

13.1.  Normative References

   [I-D.ietf-anima-voucher]
              Watsen, K., Richardson, M., Pritikin, M., and T. Eckert,
              "Voucher Profile for Bootstrapping Protocols", draft-ietf-
              anima-voucher-07 (work in progress), January 2018.

   [I-D.ietf-netmod-yang-data-ext]
              Bierman, A., Bjorklund, M., and K. Watsen, "YANG Data
              Extensions", draft-ietf-netmod-yang-data-ext-00 (work in
              progress), February 2018.

   [ITU.X690.1994]
              International Telecommunications Union, "Information
              Technology - ASN.1 encoding rules: Specification of Basic
              Encoding Rules (BER), Canonical Encoding Rules (CER) and
              Distinguished Encoding Rules (DER)", ITU-T Recommendation
              X.690, 1994.

   [RFC1035]  Mockapetris, P., "Domain names - implementation and
              specification", STD 13, RFC 1035, DOI 10.17487/RFC1035,
              November 1987, <https://www.rfc-editor.org/info/rfc1035>.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC3315]  Droms, R., Ed., Bound, J., Volz, B., Lemon, T., Perkins,
              C., and M. Carney, "Dynamic Host Configuration Protocol
              for IPv6 (DHCPv6)", RFC 3315, DOI 10.17487/RFC3315, July
              2003, <https://www.rfc-editor.org/info/rfc3315>.

   [RFC3396]  Lemon, T. and S. Cheshire, "Encoding Long Options in the
              Dynamic Host Configuration Protocol (DHCPv4)", RFC 3396,
              DOI 10.17487/RFC3396, November 2002,
              <https://www.rfc-editor.org/info/rfc3396>.

   [RFC5280]  Cooper, D., Santesson, S., Farrell, S., Boeyen, S.,
              Housley, R., and W. Polk, "Internet X.509 Public Key
              Infrastructure Certificate and Certificate Revocation List
              (CRL) Profile", RFC 5280, DOI 10.17487/RFC5280, May 2008,
              <https://www.rfc-editor.org/info/rfc5280>.






Watsen, et al.           Expires August 31, 2018               [Page 60]


Internet-Draft                 Zero Touch                  February 2018


   [RFC5652]  Housley, R., "Cryptographic Message Syntax (CMS)", STD 70,
              RFC 5652, DOI 10.17487/RFC5652, September 2009,
              <https://www.rfc-editor.org/info/rfc5652>.

   [RFC6020]  Bjorklund, M., Ed., "YANG - A Data Modeling Language for
              the Network Configuration Protocol (NETCONF)", RFC 6020,
              DOI 10.17487/RFC6020, October 2010,
              <https://www.rfc-editor.org/info/rfc6020>.

   [RFC6125]  Saint-Andre, P. and J. Hodges, "Representation and
              Verification of Domain-Based Application Service Identity
              within Internet Public Key Infrastructure Using X.509
              (PKIX) Certificates in the Context of Transport Layer
              Security (TLS)", RFC 6125, DOI 10.17487/RFC6125, March
              2011, <https://www.rfc-editor.org/info/rfc6125>.

   [RFC6234]  Eastlake 3rd, D. and T. Hansen, "US Secure Hash Algorithms
              (SHA and SHA-based HMAC and HKDF)", RFC 6234,
              DOI 10.17487/RFC6234, May 2011,
              <https://www.rfc-editor.org/info/rfc6234>.

   [RFC6762]  Cheshire, S. and M. Krochmal, "Multicast DNS", RFC 6762,
              DOI 10.17487/RFC6762, February 2013,
              <https://www.rfc-editor.org/info/rfc6762>.

   [RFC6763]  Cheshire, S. and M. Krochmal, "DNS-Based Service
              Discovery", RFC 6763, DOI 10.17487/RFC6763, February 2013,
              <https://www.rfc-editor.org/info/rfc6763>.

   [RFC6991]  Schoenwaelder, J., Ed., "Common YANG Data Types",
              RFC 6991, DOI 10.17487/RFC6991, July 2013,
              <https://www.rfc-editor.org/info/rfc6991>.

   [RFC7227]  Hankins, D., Mrugalski, T., Siodelski, M., Jiang, S., and
              S. Krishnan, "Guidelines for Creating New DHCPv6 Options",
              BCP 187, RFC 7227, DOI 10.17487/RFC7227, May 2014,
              <https://www.rfc-editor.org/info/rfc7227>.

   [RFC7950]  Bjorklund, M., Ed., "The YANG 1.1 Data Modeling Language",
              RFC 7950, DOI 10.17487/RFC7950, August 2016,
              <https://www.rfc-editor.org/info/rfc7950>.

   [RFC8040]  Bierman, A., Bjorklund, M., and K. Watsen, "RESTCONF
              Protocol", RFC 8040, DOI 10.17487/RFC8040, January 2017,
              <https://www.rfc-editor.org/info/rfc8040>.






Watsen, et al.           Expires August 31, 2018               [Page 61]


Internet-Draft                 Zero Touch                  February 2018


   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

   [Std-802.1AR-2009]
              IEEE SA-Standards Board, "IEEE Standard for Local and
              metropolitan area networks - Secure Device Identity",
              December 2009, <http://standards.ieee.org/findstds/
              standard/802.1AR-2009.html>.

13.2.  Informative References

   [I-D.ietf-netconf-keystore]
              Watsen, K., "YANG Data Model for a "Keystore" Mechanism",
              draft-ietf-netconf-keystore-04 (work in progress), October
              2017.

   [I-D.ietf-netmod-yang-tree-diagrams]
              Bjorklund, M. and L. Berger, "YANG Tree Diagrams", draft-
              ietf-netmod-yang-tree-diagrams-06 (work in progress),
              February 2018.

   [RFC3688]  Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
              DOI 10.17487/RFC3688, January 2004,
              <https://www.rfc-editor.org/info/rfc3688>.

   [RFC5246]  Dierks, T. and E. Rescorla, "The Transport Layer Security
              (TLS) Protocol Version 1.2", RFC 5246,
              DOI 10.17487/RFC5246, August 2008,
              <https://www.rfc-editor.org/info/rfc5246>.

   [RFC6241]  Enns, R., Ed., Bjorklund, M., Ed., Schoenwaelder, J., Ed.,
              and A. Bierman, Ed., "Network Configuration Protocol
              (NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011,
              <https://www.rfc-editor.org/info/rfc6241>.

   [RFC6242]  Wasserman, M., "Using the NETCONF Protocol over Secure
              Shell (SSH)", RFC 6242, DOI 10.17487/RFC6242, June 2011,
              <https://www.rfc-editor.org/info/rfc6242>.

   [RFC6536]  Bierman, A. and M. Bjorklund, "Network Configuration
              Protocol (NETCONF) Access Control Model", RFC 6536,
              DOI 10.17487/RFC6536, March 2012,
              <https://www.rfc-editor.org/info/rfc6536>.







Watsen, et al.           Expires August 31, 2018               [Page 62]


Internet-Draft                 Zero Touch                  February 2018


   [RFC6698]  Hoffman, P. and J. Schlyter, "The DNS-Based Authentication
              of Named Entities (DANE) Transport Layer Security (TLS)
              Protocol: TLSA", RFC 6698, DOI 10.17487/RFC6698, August
              2012, <https://www.rfc-editor.org/info/rfc6698>.

   [RFC6960]  Santesson, S., Myers, M., Ankney, R., Malpani, A.,
              Galperin, S., and C. Adams, "X.509 Internet Public Key
              Infrastructure Online Certificate Status Protocol - OCSP",
              RFC 6960, DOI 10.17487/RFC6960, June 2013,
              <https://www.rfc-editor.org/info/rfc6960>.

   [RFC8071]  Watsen, K., "NETCONF Call Home and RESTCONF Call Home",
              RFC 8071, DOI 10.17487/RFC8071, February 2017,
              <https://www.rfc-editor.org/info/rfc8071>.





































Watsen, et al.           Expires August 31, 2018               [Page 63]


Internet-Draft                 Zero Touch                  February 2018


Appendix A.  Workflow Overview

   The zero touch solution presented in this document is conceptualized
   to be composed of the non-normative workflows described in this
   section.  Implementation details are expected to vary.  Each diagram
   is followed by a detailed description of the steps presented in the
   diagram, with further explanation on how implementations may vary.

A.1.  Enrollment and Ordering Devices

   The following diagram illustrates key interactions that may occur
   from when a prospective owner enrolls in a manufacturer's zero touch
   program to when the manufacturer ships devices for an order placed by
   the prospective owner.





































Watsen, et al.           Expires August 31, 2018               [Page 64]


Internet-Draft                 Zero Touch                  February 2018


                                  +-----------+
   +------------+                 |Prospective|                    +---+
   |Manufacturer|                 |   Owner   |                    |NMS|
   +------------+                 +-----------+                    +---+
         |                              |                            |
         |                              |                            |
         |  1. initiate enrollment      |                            |
         #<-----------------------------|                            |
         #                              |                            |
         #                              |                            |
         #     IDevID trust anchor      |                            |
         #----------------------------->#  set IDevID trust anchor   |
         #                              #--------------------------->|
         #                              |                            |
         #     bootstrap server         |                            |
         #     account credentials      |                            |
         #----------------------------->#  set credentials           |
         |                              #--------------------------->|
         |                              |                            |
         |                              |                            |
         |  2. set owner certificate trust anchor                    |
         |<----------------------------------------------------------|
         |                              |                            |
         |                              |                            |
         |  3. place device order       |                            |
         |<-----------------------------#  model devices             |
         |                              #--------------------------->|
         |                              |                            |
         |  4. ship devices and send    |                            |
         |     device identifiers and   |                            |
         |     ownership vouchers       |                            |
         |----------------------------->#  set device identifiers    |
         |                              #  and ownership vouchers    |
         |                              #--------------------------->|
         |                              |                            |

   Each numbered item below corresponds to a numbered item in the
   diagram above.

   1.  A prospective owner of a manufacturer's devices initiates an
       enrollment process with the manufacturer.  This process includes
       the following:

       *  Regardless how the prospective owner intends to bootstrap
          their devices, they will always obtain from the manufacturer
          the trust anchor certificate for the IDevID certificates.
          This certificate will is installed on the prospective owner's




Watsen, et al.           Expires August 31, 2018               [Page 65]


Internet-Draft                 Zero Touch                  February 2018


          NMS so that the NMS can authenticate the IDevID certificates
          when they're presented to subsequent steps.

       *  If the manufacturer hosts an Internet based bootstrap server
          (e.g., a redirect server) such as described in Section 4.4,
          then credentials necessary to configure the bootstrap server
          would be provided to the prospective owner.  If the bootstrap
          server is configurable through an API (outside the scope of
          this document), then the credentials might be installed on the
          prospective owner's NMS so that the NMS can subsequently
          configure the manufacturer-hosted bootstrap server directly.

   2.  If the manufacturer's devices are able to validate signed data
       (Section 5.4), and assuming that the prospective owner's NMS is
       able to prepare and sign the bootstrapping data itself, the
       prospective owner's NMS might set a trust anchor certificate onto
       the manufacturer's bootstrap server, using the credentials
       provided in the previous step.  This certificate is the trust
       anchor certificate that the prospective owner would like the
       manufacturer to place into the ownership vouchers it generates,
       thereby enabling devices to trust the owner's owner certificate.
       How this trust anchor certificate is used to enable devices to
       validate signed bootstrapping data is described in Section 5.4.

   3.  Some time later, the prospective owner places an order with the
       manufacturer, perhaps with a special flag checked for zero touch
       handling.  At this time, or perhaps before placing the order, the
       owner may model the devices in their NMS, creating virtual
       objects for the devices with no real-world device associations.
       For instance the model can be used to simulate the device's
       location in the network and the configuration it should have when
       fully operational.

   4.  When the manufacturer fulfills the order, shipping the devices to
       their intended locations, they may notify the owner of the
       devices's serial numbers and shipping destinations, which the
       owner may use to stage the network for when the devices power on.
       Additionally, the manufacturer may send one or more ownership
       vouchers, cryptographically assigning ownership of those devices
       to the owner.  The owner may set this information on their NMS,
       perhaps binding specific modeled devices to the serial numbers
       and ownership vouchers.

A.2.  Owner Stages the Network for Bootstrap

   The following diagram illustrates how an owner might stage the
   network for bootstrapping devices.




Watsen, et al.           Expires August 31, 2018               [Page 66]


Internet-Draft                 Zero Touch                  February 2018


               +----------+ +------------+
               |Deployment| |Manufacturer| +------+ +------+
               | Specific | |   Hosted   | | Local| | Local| +---------+
         +---+ |Bootstrap | | Bootstrap  | |  DNS | | DHCP | |Removable|
         |NMS| |  Server  | |   Server   | |Server| |Server| | Storage |
         +---+ +----------+ +------------+ +------+ +------+ +---------+
           |        |             |            |        |         |
  1.       |        |             |            |        |         |
  activate |        |             |            |        |         |
  modeled  |        |             |            |        |         |
  device   |        |             |            |        |         |
  -------->|        |             |            |        |         |
           | 2. (optional)        |            |        |         |
           |    configure         |            |        |         |
           |    bootstrap         |            |        |         |
           |    server            |            |        |         |
           |------->|             |            |        |         |
           |        |             |            |        |         |
           | 3. (optional) configure           |        |         |
           |    bootstrap server  |            |        |         |
           |--------------------->|            |        |         |
           |        |             |            |        |         |
           |        |             |            |        |         |
           | 4. (optional) configure DNS server|        |         |
           |---------------------------------->|        |         |
           |        |             |            |        |         |
           |        |             |            |        |         |
           | 5. (optional) configure DHCP server        |         |
           |------------------------------------------->|         |
           |        |             |            |        |         |
           |        |             |            |        |         |
           | 6. (optional) store bootstrapping artifacts on media |
           |----------------------------------------------------->|
           |        |             |            |        |         |
           |        |             |            |        |         |

   Each numbered item below corresponds to a numbered item in the
   diagram above.

   1.  Having previously modeled the devices, including setting their
       fully operational configurations and associating device serial
       numbers and (optionally) ownership vouchers, the owner might
       "activate" one or more modeled devices.  That is, the owner tells
       the NMS to perform the steps necessary to prepare for when the
       real-world devices power up and initiate the bootstrapping
       process.  Note that, in some deployments, this step might be
       combined with the last step from the previous workflow.  Here it




Watsen, et al.           Expires August 31, 2018               [Page 67]


Internet-Draft                 Zero Touch                  February 2018


       is depicted that an NMS performs the steps, but they may be
       performed manually or through some other mechanism.

   2.  If it is desired to use a deployment specific bootstrap server,
       it must be configured to provide the bootstrapping information
       for the specific devices.  Configuring the bootstrap server may
       occur via a programmatic API not defined by this document.
       Illustrated here as an external component, the bootstrap server
       may be implemented as an internal component of the NMS itself.

   3.  If it is desired to use a manufacturer hosted bootstrap server,
       it must be configured to provide the bootstrapping information
       for the specific devices.  The configuration must be either
       redirect or onboarding information.  That is, either the
       manufacturer hosted bootstrap server will redirect the device to
       another bootstrap server, or provide the device with the
       onboarding information itself.  The types of bootstrapping
       information the manufacturer hosted bootstrap server supports may
       vary by implementation; some implementations may only support
       redirect information, or only support onboarding information, or
       support both redirect and onboarding information.  Configuring
       the bootstrap server may occur via a programmatic API not defined
       by this document.

   4.  If it is desired to use a DNS server to supply bootstrapping
       information, a DNS server needs to be configured.  If multicast
       DNS-SD is desired, then the server must reside on the local
       network, otherwise the DNS server may reside on a remote network.
       Please see Section 4.2 for more information about how to
       configure DNS servers.  Configuring the DNS server may occur via
       a programmatic API not defined by this document.

   5.  If it is desired to use a DHCP server to supply bootstrapping
       data, a DHCP server needs to be configured.  The DHCP server may
       be accessed directly or via a DHCP relay.  Please see Section 4.3
       for more information about how to configure DHCP servers.
       Configuring the DHCP server may occur via a programmatic API not
       defined by this document.

   6.  If it is desired to use a removable storage device (e.g., USB
       flash drive) to supply bootstrapping information, the information
       would need to be placed onto it.  Please see Section 4.1 for more
       information about how to configure a removable storage device.








Watsen, et al.           Expires August 31, 2018               [Page 68]


Internet-Draft                 Zero Touch                  February 2018


A.3.  Device Powers On

   The following diagram illustrates the sequence of activities that
   occur when a device powers on.

                                                     +----------+
                                      +-----------+  |Deployment|
                                      | Source of |  | Specific |
  +------+                            | Bootstrap |  |Bootstrap |  +---+
  |Device|                            |   Data    |  |  Server  |  |NMS|
  +------+                            +-----------+  +----------+  +---+
     |                                      |              |         |
     |                                      |              |         |
     | 1. if zerotouch bootstrap service    |              |         |
     |    is not enabled, then exit.        |              |         |
     |                                      |              |         |
     | 2. for each source supported, check  |              |         |
     |    for bootstrapping data.           |              |         |
     |------------------------------------->|              |         |
     |                                      |              |         |
     | 3. if onboarding information found,  |              |         |
     |    initialize self and, only if      |              |         |
     |    source is a bootstrap server,     |              |         |
     |    send progress updates.            |              |         |
     |------------------------------------->#              |         |
     |                                      # webhook      |         |
     |                                      #----------------------->|
     |                                                     |         |
     | 4. else if redirect-information found, for each     |         |
     |    bootstrap server specified, check for data.      |         |
     |-+-------------------------------------------------->|         |
     | |                                                   |         |
     | |  if more redirect-information is found, recurse   |         |
     | |  (not depicted), else if onboarding-information   |         |
     | |  found, initialize self and post progress reports |         |
     | +-------------------------------------------------->#         |
     |                                                     # webhook |
     |                                                     #-------->|
     |
     | 5. retry sources and/or wait for manual provisioning.
     |

   The interactions in the above diagram are described below.

   1.  Upon power being applied, the device checks to see if zerotouch
       bootstrapping is configured, such as must be the case when
       running its "factory default" configuration.  If zerotouch




Watsen, et al.           Expires August 31, 2018               [Page 69]


Internet-Draft                 Zero Touch                  February 2018


       bootstrapping is not configured, then the bootstrapping logic
       exits and none of the following interactions occur.

   2.  For each source of bootstrapping data the device supports,
       preferably in order of closeness to the device (e.g., removable
       storage before Internet based servers), the device checks to see
       if there is any bootstrapping data for it there.

   3.  If onboarding information is found, the device initializes itself
       accordingly (e.g., installing a boot-image and committing an
       initial configuration).  If the source is a bootstrap server, and
       the bootstrap server can be trusted (i.e., TLS-level
       authentication), the device also sends progress reports to the
       bootstrap server.

       *  The contents of the initial configuration should configure an
          administrator account on the device (e.g., username, ssh-rsa
          key, etc.), and should configure the device either to listen
          for NETCONF or RESTCONF connections or to initiate call home
          connections [RFC8071], and should disable the zerotouch
          bootstrapping service (e.g., the 'enabled' leaf in data model
          presented in Section 8).

       *  If the bootstrap server supports forwarding device progress
          reports to external systems (e.g., via a webhook), a
          "bootstrap-complete" progress report (Section 7.3) informs the
          external system to know when it can, for instance, initiate a
          connection to the device.  To support this scenario further,
          the 'bootstrap-complete' progress report may also relay the
          device's SSH host keys and/or TLS certificates, with which the
          external system can use to authenticate subsequent connections
          to the device.

       If the device successfully completes the bootstrapping process,
       it exits the bootstrapping logic without considering any
       additional sources of bootstrapping data.

   4.  Otherwise, if redirect information is found, the device iterates
       through the list of specified bootstrap servers, checking to see
       if it has bootstrapping data for the device.  If the bootstrap
       server returns more redirect information, then the device
       processes it recursively.  Otherwise, if the bootstrap server
       returns onboarding information, the device processes it following
       the description provided in (3) above.

   5.  After having tried all supported sources of bootstrapping data,
       the device may retry again all the sources and/or provide
       manageability interfaces for manual configuration (e.g., CLI,



Watsen, et al.           Expires August 31, 2018               [Page 70]


Internet-Draft                 Zero Touch                  February 2018


       HTTP, NETCONF, etc.).  If manual configuration is allowed, and
       such configuration is provided, the configuration should also
       disable the zerotouch bootstrapping service, as the need for
       bootstrapping would no longer be present.

Appendix B.  Promoting a Connection from Untrusted to Trusted

   The following diagram illustrates a sequence of bootstrapping
   activities that promote an untrusted connection to a bootstrap server
   to a trusted connection to the same bootstrap server.  This enables a
   device to limit the amount of information it might disclose to an
   adversary hosting an untrusted bootstrap server.

                                                         +----------+
                                                         |Deployment|
                                                         | Specific |
   +------+                                              |Bootstrap |
   |Device|                                              |  Server  |
   +------+                                              +----------+
      |                                                        |
      | 1. "HTTPS" Request ('untrusted-connection')            |
      |------------------------------------------------------->|
      | 2. "HTTPS" Response (signed redirect information)      |
      |<-------------------------------------------------------|
      |                                                        |
      |                                                        |
      | 3. HTTPS Request (os-name=xyz, os-version=123, etc.)   |
      |------------------------------------------------------->|
      | 4. HTTPS Response (unsigned onboarding information     |
      |<-------------------------------------------------------|
      |                                                        |

   The interactions in the above diagram are described below.

   1.  The device initiates an untrusted connection to a bootstrap
       server, as is indicated by putting "HTTPS" in double quotes
       above.  It is still an HTTPS connection, but the device is unable
       to authenticate the bootstrap server's TLS certificate.  Because
       the device is unable to trust the bootstrap server, it purposely
       only sends the 'untrusted-connection' input parameter to the
       'get-bootstrapping-data' RPC, informing the bootstrap server that
       it doesn't trust it and may be holding back some information from
       the server (e.g., other input parameters, progress reports,
       etc.).

   2.  The bootstrap server, seeing the 'untrusted-connection' input
       parameters, knows that it can either send unsigned redirect
       information or signed data of any type.  But, in this case, the



Watsen, et al.           Expires August 31, 2018               [Page 71]


Internet-Draft                 Zero Touch                  February 2018


       bootstrap server has the ability to sign data and chooses to
       respond with signed redirect information, not signed onboarding
       information as might be expected, securely redirecting the device
       back to it again.

   3.  Upon validating the signed redirect information, the device
       establishes a secure connection to the bootstrap server.
       Unbeknownst to the device, it is the same bootstrap server it was
       connected to previously but, because the device is able to
       authenticate the bootstrap server tis time, it sends its normal
       'get-bootstrapping-data' request (i.e., with additional input
       parameters) as well as its progress reports (not depicted).

   4.  This time, because the 'untrusted-connection' parameter was not
       passed, having access to all of the device's input parameters,
       the bootstrap server returns unsigned onboarding information to
       the device.

Appendix C.  Change Log

C.1.  ID to 00

   o  Major structural update; the essence is the same.  Most every
      section was rewritten to some degree.

   o  Added a Use Cases section

   o  Added diagrams for "Actors and Roles" and "NMS Precondition"
      sections, and greatly improved the "Device Boot Sequence" diagram

   o  Removed support for physical presence or any ability for
      configlets to not be signed.

   o  Defined the Zero Touch Information DHCP option

   o  Added an ability for devices to also download images from
      configuration servers

   o  Added an ability for configlets to be encrypted

   o  Now configuration servers only have to support HTTP/S - no other
      schemes possible

C.2.  00 to 01

   o  Added boot-image and validate-owner annotations to the "Actors and
      Roles" diagram.




Watsen, et al.           Expires August 31, 2018               [Page 72]


Internet-Draft                 Zero Touch                  February 2018


   o  Fixed 2nd paragraph in section 7.1 to reflect current use of
      anyxml.

   o  Added encrypted and signed-encrypted examples

   o  Replaced YANG module with XSD schema

   o  Added IANA request for the Zero Touch Information DHCP Option

   o  Added IANA request for media types for boot-image and
      configuration

C.3.  01 to 02

   o  Replaced the need for a configuration signer with the ability for
      each NMS to be able to sign its own configurations, using
      manufacturer signed ownership vouchers and owner certificates.

   o  Renamed configuration server to bootstrap server, a more
      representative name given the information devices download from
      it.

   o  Replaced the concept of a configlet by defining a southbound
      interface for the bootstrap server using YANG.

   o  Removed the IANA request for the boot-image and configuration
      media types

C.4.  02 to 03

   o  Minor update, mostly just to add an Editor's Note to show how this
      draft might integrate with the draft-pritikin-anima-bootstrapping-
      keyinfra.

C.5.  03 to 04

   o  Major update formally introducing unsigned data and support for
      Internet-based redirect servers.

   o  Added many terms to Terminology section.

   o  Added all new "Guiding Principles" section.

   o  Added all new "Sources for Bootstrapping Data" section.

   o  Rewrote the "Interactions" section and renamed it "Workflow
      Overview".




Watsen, et al.           Expires August 31, 2018               [Page 73]


Internet-Draft                 Zero Touch                  February 2018


C.6.  04 to 05

   o  Semi-major update, refactoring the document into more logical
      parts

   o  Created new section for information types

   o  Added support for DNS servers

   o  Now allows provisional TLS connections

   o  Bootstrapping data now supports scripts

   o  Device Details section overhauled

   o  Security Considerations expanded

   o  Filled in enumerations for notification types

C.7.  05 to 06

   o  Minor update

   o  Added many Normative and Informative references.

   o  Added new section Other Considerations.

C.8.  06 to 07

   o  Minor update

   o  Added an Editorial Note section for RFC Editor.

   o  Updated the IANA Considerations section.

C.9.  07 to 08

   o  Minor update

   o  Updated to reflect review from Michael Richardson.

C.10.  08 to 09

   o  Added in missing "Signature" artifact example.

   o  Added recommendation for manufacturers to use interoperable
      formats and file naming conventions for removable storage devices.




Watsen, et al.           Expires August 31, 2018               [Page 74]


Internet-Draft                 Zero Touch                  February 2018


   o  Added configuration-handling leaf to guide if config should be
      merged, replaced, or processed like an edit-config/yang-patch
      document.

   o  Added a pre-configuration script, in addition to the post-
      configuration script from -05 (issue #15).

C.11.  09 to 10

   o  Factored ownership voucher and voucher revocation to a separate
      document: draft-kwatsen-netconf-voucher. (issue #11)

   o  Removed <configuration-handling> options 'edit-config' and 'yang-
      patch'. (issue #12)

   o  Defined how a signature over signed-data returned from a bootstrap
      server is processed. (issue #13)

   o  Added recommendation for removable storage devices to use open/
      standard file systems when possible.  (issue #14)

   o  Replaced notifications "script-[warning/error]" with "[pre/post]-
      script-[warning/error]". (goes with issue #15)

   o  switched owner-certificate to be encoded using the PKCS #7 format.
      (issue #16)

   o  Replaced md5/sha1 with sha256 inside a choice statement, for
      future extensibility. (issue #17)

   o  A ton of editorial changes, as I went thru the entire draft with a
      fine-toothed comb.

C.12.  10 to 11

   o  fixed yang validation issues found by IETFYANGPageCompilation.
      note: these issues were NOT found by pyang --ietf or by the
      submission-time validator...

   o  fixed a typo in the yang module, someone the config false
      statement was removed.

C.13.  11 to 12

   o  fixed typo that prevented Appendix B from loading the examples
      correctly.





Watsen, et al.           Expires August 31, 2018               [Page 75]


Internet-Draft                 Zero Touch                  February 2018


   o  fixed more yang validation issues found by
      IETFYANGPageCompilation.  note: again, these issues were NOT found
      by pyang --ietf or by the submission-time validator...

   o  updated a few of the notification enumerations to be more
      consistent with the other enumerations (following the warning/
      error pattern).

   o  updated the information-type artifact to state how it's encoded,
      matching the language that was in Appendix B.

C.14.  12 to 13

   o  defined a standalone artifact to encode the old information-type
      into a PKCS #7 structure.

   o  standalone information artifact hardcodes JSON encoding (to match
      the voucher draft).

   o  combined the information and signature PKCS #7 structures into a
      single PKCS #7 structure.

   o  moved the certificate-revocations into the owner-certificate's
      PKCS #7 structure.

   o  eliminated support for voucher-revocations, to reflect the
      voucher-draft's switch from revocations to renewals.

C.15.  13 to 14

   o  Renamed "bootstrap information" to "onboarding information".

   o  Rewrote DHCP sections to address the packet-size limitation issue,
      as discussed in Chicago.

   o  Added Ian as an author for his text-contributions to the DHCP
      sections.

   o  Removed the Guiding Principles section.

C.16.  14 to 15

   o  Renamed action 'notification' to 'update-progress' and, likewise
      'notification-type' to 'update-type'.

   o  Updated examples to use "base64encodedvalue==" for binary values.





Watsen, et al.           Expires August 31, 2018               [Page 76]


Internet-Draft                 Zero Touch                  February 2018


   o  Greatly simplified the "Artifact Groupings" section, and moved it
      as a subsection to the "Artifacts" section.

   o  Moved the "Workflow Overview" section to the Appendix.

   o  Renamed "bootstrap information" to "update information".

   o  Removed "Other Considerations" section.

   o  Tons of editorial updates.

C.17.  15 to 16

   o  tweaked language to refer to "initial state" rather than "factory
      default configuration", so as accommodate white-box scenarios.

   o  added a paragraph to Intro regarding how the solution primarily
      regards physical machines, but could be extended to VMs by a
      future document.

   o  added a pointer to the Workflow Overview section (recently moved
      to the Appendix) to the Intro.

   o  added a note that, in order to simplify the verification process,
      the "Zerotouch Information" PKCS #7 structure MUST also contain
      the signing X.509 certificate.

   o  noted that the owner certificate's must either have no Key Usage
      or the Key Usage must set the "digitalSignature" bit.

   o  noted that the owner certificate's subject and subjectAltName
      values are not constrained.

   o  moved/consolidated some text from the Artifacts section down to
      the Device Details section.

   o  tightened up some ambiguous language, for instance, by referring
      to specific leaf names in the Voucher artifact.

   o  reverted a previously overzealous s/unique-id/serial-number/
      change.

   o  modified language for when ZTP runs from when factory-default
      config is running to when ZTP is configured, which the factory-
      defaults should set .






Watsen, et al.           Expires August 31, 2018               [Page 77]


Internet-Draft                 Zero Touch                  February 2018


C.18.  16 to 17

   o  Added an example for how to promote an untrusted connection to a
      trusted connection.

   o  Added a "query parameters" section defining some parameters
      enabling scenarios raised in last call.

   o  Added a "Disclosing Information to Untrusted Servers" section to
      the Security Considerations.

C.19.  17 to 18

   o  Added Security Considerations for each YANG module.

   o  Reverted back to the device always sending its DevID cert.

   o  Moved data tree to ac'get-bootstrapping-data' RPC.

   o  Moved the 'update-progress' action to a 'report-progress' RPC.

   o  Added an 'untrusted-connection' parameter to 'get-bootstrapping-
      data' RPC.

   o  Added the "ietf-zerotouch-device" module.

   o  Lots of small updates.

C.20.  18 to 19

   o  Fixed 'must' expressions, by converting 'choice' to a 'list' of
      'image-verification', each of which now points to a base identity
      called "hash-algorithm".  There's just one algorithm currently
      defined (sha-256).  Wish there was a standard crypto module that
      could identify such identities.

C.21.  19 to 20

   o  Now references I-D.ietf-netmod-yang-tree-diagrams.

   o  Fixed tree-diagrams in Section 2 to always reflect current YANG
      (now they are now dynamically generated).

   o  The "redirect-information" container's "trust-anchor" is now a CMS
      structure that can contain a chain of certificates, rather than a
      single certificate.





Watsen, et al.           Expires August 31, 2018               [Page 78]


Internet-Draft                 Zero Touch                  February 2018


   o  The "onboarding-information" container's support for image
      verification reworked to be extensible.

   o  Added a reference to the "Device Details" section to the new
      example-zerotouch-device module.

   o  Clarified that the device must always pass its IDevID certificate,
      even for untrusted bootstrap servers.

   o  Fixed the description statement for the "script" typedef to refer
      to the [pre/post]-script-[warning/error] enums, rather than the
      legacy script-[warning/error] enums.

   o  For the get-bootstrapping-data RPC's input, removed the "remote-
      id" and "circuit-id" fields, and added a "hw-model" field.

   o  Improved DHCP error handling text.

   o  Added MUST requirement for DHCPv6 client and server implementing
      [RFC3396] to handle URI lists longer than 255 octets.

   o  Changed the "configuration" value in onboarding-information to be
      type 'binary' instead of 'anydata'.

   o  Moved everything from PKCS#7 to CMS (this shows up as a big
      change).

   o  Added the early code point allocation assignments for the DHCP
      Options in the IANA Considerations section, and updated the RFC
      Editor note accordingly.

   o  Added RFC Editor request to replace the assigned values for the
      CMS content types.

   o  Relaxed auth requirements from device needing to always send
      IDevID cert to device needing to always send authentication
      credentials, as this better matches what RFC 8040 Section 2.5
      says.

   o  Moved normative module "ietf-zerotouch-device" to non-normative
      module "example-zerotouch-device".

   o  Updated Title, Abstract, and Introduction per discussion on list.








Watsen, et al.           Expires August 31, 2018               [Page 79]


Internet-Draft                 Zero Touch                  February 2018


Authors' Addresses

   Kent Watsen
   Juniper Networks

   EMail: kwatsen@juniper.net


   Mikael Abrahamsson
   T-Systems

   EMail: mikael.abrahamsson@t-systems.se


   Ian Farrer
   Deutsche Telekom AG

   EMail: ian.farrer@telekom.de

































Watsen, et al.           Expires August 31, 2018               [Page 80]


Html markup produced by rfcmarkup 1.126, available from https://tools.ietf.org/tools/rfcmarkup/