[Docs] [txt|pdf|xml|html] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: (draft-cfrg-re-keying) 00 01 02 03 04 05 06 07 08 09 10 11 12

CFRG                                                  S. Smyshlyaev, Ed.
Internet-Draft                                                 CryptoPro
Intended status: Informational                         February 28, 2018
Expires: September 1, 2018


                Re-keying Mechanisms for Symmetric Keys
                      draft-irtf-cfrg-re-keying-12

Abstract

   A certain maximum amount of data can be safely encrypted when
   encryption is performed under a single key.  This amount is called
   "key lifetime".  This specification describes a variety of methods to
   increase the lifetime of symmetric keys.  It provides two types of
   re-keying mechanisms based on hash functions and on block ciphers,
   that can be used with modes of operations such as CTR, GCM, CBC, CFB
   and OMAC.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on September 1, 2018.

Copyright Notice

   Copyright (c) 2018 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of



Smyshlyaev              Expires September 1, 2018               [Page 1]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
   2.  Conventions Used in This Document . . . . . . . . . . . . . .   6
   3.  Basic Terms and Definitions . . . . . . . . . . . . . . . . .   6
   4.  Choosing Constructions and Security Parameters  . . . . . . .   7
   5.  External Re-keying Mechanisms . . . . . . . . . . . . . . . .  10
     5.1.  Methods of Key Lifetime Control . . . . . . . . . . . . .  13
     5.2.  Parallel Constructions  . . . . . . . . . . . . . . . . .  13
       5.2.1.  Parallel Construction Based on a KDF on a Block
               Cipher  . . . . . . . . . . . . . . . . . . . . . . .  14
       5.2.2.  Parallel Construction Based on a KDF on a Hash
               Function  . . . . . . . . . . . . . . . . . . . . . .  14
       5.2.3.  Tree-based Construction . . . . . . . . . . . . . . .  15
     5.3.  Serial Constructions  . . . . . . . . . . . . . . . . . .  16
       5.3.1.  Serial Construction Based on a KDF on a Block Cipher   17
       5.3.2.  Serial Construction Based on a KDF on a Hash Function  18
     5.4.  Exploiting Additional Entropy on Re-keying  . . . . . . .  18
   6.  Internal Re-keying Mechanisms . . . . . . . . . . . . . . . .  19
     6.1.  Methods of Key Lifetime Control . . . . . . . . . . . . .  21
     6.2.  Constructions that Do Not Require Master Key  . . . . . .  22
       6.2.1.  ACPKM Re-keying Mechanisms  . . . . . . . . . . . . .  22
       6.2.2.  CTR-ACPKM Encryption Mode . . . . . . . . . . . . . .  24
       6.2.3.  GCM-ACPKM Authenticated Encryption Mode . . . . . . .  26
     6.3.  Constructions that Require Master Key . . . . . . . . . .  28
       6.3.1.  ACPKM-Master Key Derivation from the Master Key . . .  28
       6.3.2.  CTR-ACPKM-Master Encryption Mode  . . . . . . . . . .  30
       6.3.3.  GCM-ACPKM-Master Authenticated Encryption Mode  . . .  32
       6.3.4.  CBC-ACPKM-Master Encryption Mode  . . . . . . . . . .  34
       6.3.5.  CFB-ACPKM-Master Encryption Mode  . . . . . . . . . .  37
       6.3.6.  OMAC-ACPKM-Master Authentication Mode . . . . . . . .  39
   7.  Joint Usage of External and Internal Re-keying  . . . . . . .  40
   8.  Security Considerations . . . . . . . . . . . . . . . . . . .  41
   9.  References  . . . . . . . . . . . . . . . . . . . . . . . . .  42
     9.1.  Normative References  . . . . . . . . . . . . . . . . . .  42
     9.2.  Informative References  . . . . . . . . . . . . . . . . .  43
   Appendix A.  Test Examples  . . . . . . . . . . . . . . . . . . .  45
     A.1.  Test Examples for External Re-keying  . . . . . . . . . .  45
       A.1.1.  External Re-keying with a Parallel Construction . . .  45
       A.1.2.  External Re-keying with a Serial Construction . . . .  47
     A.2.  Test Examples for Internal Re-keying  . . . . . . . . . .  50
       A.2.1.  Internal Re-keying Mechanisms that Do Not Require
               Master Key  . . . . . . . . . . . . . . . . . . . . .  50
       A.2.2.  Internal Re-keying Mechanisms with a Master Key . . .  54
   Appendix B.  Contributors . . . . . . . . . . . . . . . . . . . .  66



Smyshlyaev              Expires September 1, 2018               [Page 2]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   Appendix C.  Acknowledgments  . . . . . . . . . . . . . . . . . .  67
   Author's Address  . . . . . . . . . . . . . . . . . . . . . . . .  67

1.  Introduction

   A certain maximum amount of data can be safely encrypted when
   encryption is performed under a single key.  Hereinafter this amount
   will be referred to as "key lifetime".  The key lifetime can be
   calculated from the following considerations:

   1.  Methods based on the combinatorial properties of the used block
   cipher mode of operation

      These methods do not depend on the underlying block cipher.
      Common modes restrictions derived from such methods are of order
      2^{n/2}, where n is a block size defined in Section 3.  [Sweet32]
      is an example of attack that is based on such methods.

   2.  Methods based on side-channel analysis issues

      In most cases these methods do not depend on the used encryption
      modes and weakly depend on the used block cipher features.
      Limitations resulting from these considerations are usually the
      most restrictive ones.  [TEMPEST] is an example of attack that is
      based on such methods.

   3.  Methods based on the properties of the used block cipher

      The most common methods of this type are linear and differential
      cryptanalysis [LDC].  In most cases these methods do not depend on
      the used modes of operation.  In case of secure block ciphers,
      bounds resulting from such methods are roughly the same as the
      natural bounds of 2^n, and are dominated by the other bounds
      above.  Therefore, they can be excluded from the considerations
      here.

   As a result, it is important to replace a key as soon as the total
   size of the processed plaintext under that key reaches the lifetime
   limitation.  A specific value of the key lifetime should be
   determined in accordance with some safety margin for protocol
   security and the methods outlined above.

   Suppose L is a key lifetime limitation in some protocol P.  For
   simplicity, assume that all messages have the same length m.  Hence,
   the number of messages q that can be processed with a single key K
   should be such that m * q <= L.  This can be depicted graphically as
   a rectangle with sides m and q which is enclosed by area L (see
   Figure 1).



Smyshlyaev              Expires September 1, 2018               [Page 3]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


             +------------------------+
             |                      L |
             | +--------m---------+   |
             | |==================|   |
             | |==================|   |
             | q==================|   |       m * q <= L
             | |==================|   |
             | |==================|   |
             | +------------------+   |
             +------------------------+

   Figure 1: Graphic display of the key lifetime limitation



   In practice, such amount of data that corresponds to limitation L may
   not be enough.  The simplest and obvious way in this situation is a
   regular renegotiation of an initial key after processing this
   threshold amount of data L.  However, this reduces the total
   performance, since it usually entails termination of application data
   transmission, additional service messages, the use of random number
   generator and many other additional calculations, including resource-
   intensive public key cryptography.

   For the protocols based on block ciphers or stream ciphers a more
   efficient way to increasing the key lifetime is to use various re-
   keying mechanisms.  This specification considers only the case of re-
   keying mechanisms for block ciphers, while re-keying mechanisms
   typical for stream ciphers (e.g., [Pietrzak2009], [FPS2012]) case go
   beyond the scope of this document.

   Re-keying mechanisms can be applied on the different protocol levels:
   on the block cipher level (this approach is known as fresh re-keying
   and is described, for instance, in [FRESHREKEYING]), on the block
   cipher mode of operation level (see Section 6), on the protocol level
   above the block cipher mode of operation (see Section 5).  The usage
   of the first approach is highly inefficient due to the key changing
   after processing each message block.  Moreover, fresh re-keying
   mechanisms can change the block cipher internal structure, and,
   consequently, can require the additional security analysis for each
   particular block cipher.  As a result, this approach depends on
   particular primitive properties and can not be applied to any block
   cipher, therefore, fresh re-keying mechanisms go beyond the scope of
   this document.

   Thus, this document contains the list of recommended re-keying
   mechanisms that can be used in the symmetric encryption schemes based
   on the block ciphers.  These mechanisms are independent from the



Smyshlyaev              Expires September 1, 2018               [Page 4]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   particular block cipher specification and their security properties
   rely only on the standard block cipher security assumption.

   This specification presents two basic approaches to extend the
   lifetime of a key while avoiding renegotiation that were introduced
   in [AAOS2017]:

   1.  External re-keying

      External re-keying is performed by a protocol, and it is
      independent of the underlying block cipher and the mode of
      operation.  External re-keying can use parallel and serial
      constructions.  In the parallel case, data processing keys K^1,
      K^2, ... are generated directly from the initial key K
      independently of each other.  In the serial case, every data
      processing key depends on the state that is updated after the
      generation of each new data processing key.

      As a generalization of external parallel re-keying an external
      tree-based mechanism can be considered.  It is specified in the
      Section 5.2.3 and can be viewed as the [GGM] tree generalization.
      Similar constructions are used in the one-way tree mechanism
      ([OWT]) and [AESDUKPT] standard.

   2.  Internal re-keying

      Internal re-keying is built into the mode, and it depends heavily
      on the properties of the mode of operation and the block size.

   The re-keying approaches extend the key lifetime for a single initial
   key by providing the possibility to limit the leakages (via side
   channels) and by improving combinatorial properties of the used block
   cipher mode of operation.

   In practical applications, re-keying can be useful for protocols that
   need to operate in hostile environments or under restricted resource
   conditions (e.g., that require lightweight cryptography, where
   ciphers have a small block size, that imposes strict combinatorial
   limitations).  Moreover, mechanisms that use external and internal
   re-keying may provide some properties of forward security and
   potentially some protection against future attacks (by limiting the
   number of plaintext-ciphertext pairs that an adversary can collect).
   External and internal re-keying can be used in network protocols as
   well as in the systems for data-at-rest encryption.

   Depending on the concrete protocol characteristics there might be
   situations in which both external and internal re-keying mechanisms




Smyshlyaev              Expires September 1, 2018               [Page 5]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   (see Section 7) can be applied.  For example, the similar approach
   was used in the Taha's tree construction (see [TAHA]).

   It is worthwhile to say that the re-keying mechanisms recommended in
   this document are targeted to provide PFS property and are not
   suitable for the cases when this property should be omitted in favor
   of performance characteristics, side leakage resilience or some other
   properties.  The another re-keying approach is key updating (key
   regression) algorithms (e.g., [FKK2005] and [KMNT2003]), but they
   pursue the goal different from increasing key lifetime and the
   absence of PFS property is the base claim of this approach.
   Therefore, key regression algorithms are excluded from the
   considerations here.

2.  Conventions Used in This Document

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

3.  Basic Terms and Definitions

   This document uses the following terms and definitions for the sets
   and operations on the elements of these sets:

   V*      the set of all bit strings of a finite length (hereinafter
           referred to as strings), including the empty string;
           substrings and string components are enumerated from right to
           left starting from one;

   V_s     the set of all bit strings of length s, where s is a non-
           negative integer;

   |X|     the bit length of the bit string X;

   A | B   concatenation of strings A and B both belonging to V*, i.e.,
           a string in V_{|A|+|B|}, where the left substring in V_|A| is
           equal to A, and the right substring in V_|B| is equal to B;

   (xor)   exclusive-or of two bit strings of the same length;

   Z_{2^n} ring of residues modulo 2^n;

   Int_s: V_s -> Z_{2^s}    the transformation that maps a string a =
           (a_s, ... , a_1) in V_s into the integer Int_s(a) = 2^{s-1} *
           a_s + ... + 2 * a_2 + a_1 (the interpretation of the binary
           string as an integer);




Smyshlyaev              Expires September 1, 2018               [Page 6]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   Vec_s: Z_{2^s} -> V_s  the transformation inverse to the mapping
           Int_s (the interpretation of an integer as a binary string);

   MSB_i: V_s -> V_i  the transformation that maps the string a = (a_s,
           ... , a_1) in V_s into the string MSB_i(a) = (a_s, ... ,
           a_{s-i+1}) in V_i (most significant bits);

   LSB_i: V_s -> V_i  the transformation that maps the string a = (a_s,
           ... , a_1) in V_s into the string LSB_i(a) = (a_i, ... , a_1)
           in V_i (least significant bits);

   Inc_c: V_s -> V_s  the transformation that maps the string a = (a_s,
           ... , a_1) in V_s into the string Inc_c(a) = MSB_{|a|-c}(a) |
           Vec_c(Int_c(LSB_c(a)) + 1(mod 2^c)) in V_s;

   a^s     denotes the string in V_s that consists of s 'a' bits;

   E_{K}: V_n -> V_n  the block cipher permutation under the key K in
           V_k;

   ceil(x) the smallest integer that is greater than or equal to x;

   floor(x)  the biggest integer that is less than or equal to x;

   k       the bit-length of the K; k is assumed to be divisible by 8;

   n       the block size of the block cipher (in bits); n is assumed to
           be divisible by 8;

   b       the number of data blocks in the plaintext P (b =
           ceil(|P|/n));

   N       the section size (the number of bits that are processed with
           one section key before this key is transformed).

   A plaintext message P and the corresponding ciphertext C are divided
   into b = ceil(|P|/n) blocks, denoted P = P_1 | P_2 | ... | P_b and C
   = C_1 | C_2 | ... | C_b, respectively.  The first b-1 blocks P_i and
   C_i are in V_n, for i = 1, 2, ... , b-1.  The b-th blocks P_b, C_b
   may be an incomplete blocks, i.e., in V_r, where r <= n if not
   otherwise specified.

4.  Choosing Constructions and Security Parameters

   External re-keying is an approach assuming that a key is transformed
   after encrypting a limited number of entire messages.  External re-
   keying method is chosen at the protocol level, regardless of the
   underlying block cipher or the encryption mode.  External re-keying



Smyshlyaev              Expires September 1, 2018               [Page 7]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   is recommended for protocols that process relatively short messages
   or for protocols that have a way to divide a long message into
   manageable pieces.  Through external re-keying the number of messages
   that can be securely processed with a single initial key K is
   substantially increased without loss in message length.

   External re-keying has the following advantages:

   1.  it increases the lifetime of an initial key by increasing the
       number of messages processed with this key;

   2.  it has negligible affect on the performance, when the number of
       messages processed under one initial key is sufficiently large;

   3.  it provides forward and backward security of data processing
       keys.

   However, the use of external re-keying has the following
   disadvantage: in case of restrictive key lifetime limitations the
   message sizes can become inconvenient due to impossibility of
   processing sufficiently large messages, so it could be necessary to
   perform additional fragmentation at the protocol level.  E.g. if the
   key lifetime L is 1 GB and the message length m = 3 GB, then this
   message cannot be processed as a whole and it should be divided into
   three fragments that will be processed separately.

   Internal re-keying is an approach assuming that a key is transformed
   during each separate message processing.  Such procedures are
   integrated into the base modes of operations, so every internal re-
   keying mechanism is defined for the particular operation mode and the
   block size of the used cipher.  Internal re-keying is recommended for
   protocols that process long messages: the size of each single message
   can be substantially increased without loss in number of messages
   that can be securely processed with a single initial key.

   Internal re-keying has the following advantages:

   1.  it increases the lifetime of an initial key by increasing the
       size of the messages processed with one initial key;

   2.  it has minimal impact on performance;

   3.  internal re-keying mechanisms without a master key does not
       affect short messages transformation at all;

   4.  it is transparent (works like any mode of operation): does not
       require changes of IV's and restarting MACing.




Smyshlyaev              Expires September 1, 2018               [Page 8]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   However, the use of internal re-keying has the following
   disadvantages:

   1.  a specific method must not be chosen independently of a mode of
       operation;

   2.  internal re-keying mechanisms without a master key do not provide
       backward security of data processing keys.

   Any block cipher modes of operations with internal re-keying can be
   jointly used with any external re-keying mechanisms.  Such joint
   usage increases both the number of messages processed with one
   initial key and their maximum possible size.

   If the adversary has access to the data processing interface the use
   of the same cryptographic primitives both for data processing and re-
   keying transformation decreases the code size but can lead to some
   possible vulnerabilities.  This vulnerability can be eliminated by
   using different primitives for data processing and re-keying, e.g.,
   block cipher for data processing and hash for re-keying (see
   Section 5.2.2 and Section 5.3.2).  However, in this case the security
   of the whole scheme cannot be reduced to standard notions like PRF or
   PRP, so security estimations become more difficult and unclear.

   Summing up the above-mentioned issues briefly:

   1.  If a protocol assumes processing long records (e.g., [CMS]),
       internal re-keying should be used.  If a protocol assumes
       processing a significant amount of ordered records, which can be
       considered as a single data stream (e.g., [TLS], [SSH]), internal
       re-keying may also be used.

   2.  For protocols which allow out-of-order delivery and lost records
       (e.g., [DTLS], [ESP]) external re-keying should be used as in
       this case records cannot be considered as a single data stream.
       If at the same time records are long enough, internal re-keying
       should be additionally used during each separate message
       processing.

   For external re-keying:

   1.  If it is desirable to separate transformations used for data
       processing and for key update, hash function based re-keying
       should be used.

   2.  If parallel data processing is required, then parallel external
       re-keying should be used.




Smyshlyaev              Expires September 1, 2018               [Page 9]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   3.  In case of restrictive key lifetime limitations external tree-
       based re-keying should be used.

   For internal re-keying:

   1.  If the property of forward and backward security is desirable for
       data processing keys and if additional key material can be easily
       obtained for the data processing stage, internal re-keying with a
       master key should be used.

5.  External Re-keying Mechanisms

   This section presents an approach to increase the initial key
   lifetime by using a transformation of a data processing key (frame
   key) after processing a limited number of entire messages (frame).
   It provides external parallel and serial re-keying mechanisms (see
   [AbBell]).  These mechanisms use initial key K only for frame keys
   generation and never use it directly for data processing.  Such
   mechanisms operate outside of the base modes of operations and do not
   change them at all, therefore they are called "external re-keying"
   mechanisms in this document.

   External re-keying mechanisms are recommended for usage in protocols
   that process quite small messages, since the maximum gain in
   increasing the initial key lifetime is achieved by increasing the
   number of messages.

   External re-keying increases the initial key lifetime through the
   following approach.  Suppose there is a protocol P with some mode of
   operation (base encryption or authentication mode).  Let L1 be a key
   lifetime limitation induced by side-channel analysis methods (side-
   channel limitation), let L2 be a key lifetime limitation induced by
   methods based on the combinatorial properties of a used mode of
   operation (combinatorial limitation) and let q1, q2 be the total
   numbers of messages of length m, that can be safely processed with an
   initial key K according to these limitations.

   Let L = min(L1, L2), q = min (q1, q2), q * m <= L.  As L1 limitation
   is usually much stronger than L2 limitation (L1 < L2), the final key
   lifetime restriction is equal to the most restrictive limitation L1.
   Thus, as displayed in Figure 2, without re-keying only q1 (q1 * m <=
   L1) messages can be safely processed.









Smyshlyaev              Expires September 1, 2018              [Page 10]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


           <--------m------->
           +----------------+ ^ ^
           |================| | |
           |================| | |
       K-->|================| q1|
           |================| | |
           |==============L1| | |
           +----------------+ v |
           |                |   |
           |                |   |
           |                |   q2
           |                |   |
           |                |   |
           |                |   |
           |                |   |
           |                |   |
           |                |   |
           |                |   |
           |                |   |
           |              L2|   |
           +----------------+   v

Figure 2: Basic principles of message processing without external re-keying


   Suppose that the safety margin for the protocol P is fixed and the
   external re-keying approach is applied to the initial key K to
   generate the sequence of frame keys.  The frame keys are generated in
   such a way that the leakage of a previous frame key does not have any
   impact on the following one, so the side channel limitation L1 goes
   off.  Thus, the resulting key lifetime limitation of the initial key
   K can be calculated on the basis of a new combinatorial limitation
   L2'.  It is proven (see [AbBell]) that the security of the mode of
   operation that uses external re-keying leads to an increase when
   compared to base mode without re-keying (thus, L2 < L2').  Hence, as
   displayed in Figure 3, the resulting key lifetime limitation in case
   of using external re-keying can be increased up to L2'.














Smyshlyaev              Expires September 1, 2018              [Page 11]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


                 <--------m------->
           K     +----------------+
           |     |================|
           v     |================|
          K^1--> |================|
           |     |================|
           |     |==============L1|
           |     +----------------+
           |     |================|
           v     |================|
          K^2--> |================|
           |     |================|
           |     |==============L1|
           |     +----------------+
           |     |================|
           v     |================|
          ...    |      . . .     |
                 |                |
                 |                |
                 |              L2|
                 +----------------+
                 |                |
                ...              ...
                 |             L2'|
                 +----------------+

Figure 3: Basic principles of message processing with external re-keying


   Note: the key transformation process is depicted in a simplified
   form.  A specific approach (parallel and serial) is described below.

   Consider an example.  Let the message size in a protocol P be equal
   to 1 KB.  Suppose L1 = 128 MB and L2 = 1 TB.  Thus, if an external
   re-keying mechanism is not used, the initial key K must be
   renegotiated after processing 128 MB / 1 KB = 131072 messages.

   If an external re-keying mechanism is used, the key lifetime
   limitation L1 goes off.  Hence the resulting key lifetime limitation
   L2' can be set to more then 1 TB.  Thus if an external re-keying
   mechanism is used, more then 1 TB / 1 KB = 2^30 messages can be
   processed before the initial key K is renegotiated.  This is 8192
   times greater than the number of messages that can be processed, when
   external re-keying mechanism is not used.







Smyshlyaev              Expires September 1, 2018              [Page 12]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


5.1.  Methods of Key Lifetime Control

   Suppose L is an amount of data that can be safely processed with one
   frame key.  For i in {1, 2, ... , t} the frame key K^i (see Figure 4
   and Figure 5) should be transformed after processing q_i messages,
   where q_i can be calculated in accordance with one of the following
   approaches:

   Explicit approach:

      q_i is such that |M^{i,1}| + ... + |M^{i,q_i}| <= L, |M^{i,1}| +
      ... + |M^{i,q_i+1}| > L.
      This approach allows to use the frame key K^i in almost optimal
      way but it can be applied only in case when messages cannot be
      lost or reordered (e.g., TLS records).

   Implicit approach:

      q_i = L / m_max, i = 1, ... , t.
      The amount of data processed with one frame key K^i is calculated
      under the assumption that every message has the maximum length
      m_max.  Hence this amount can be considerably less than the key
      lifetime limitation L.  On the other hand, this approach can be
      applied in case when messages may be lost or reordered (e.g., DTLS
      records).

   Dynamic key changes:

      We can organize the key change using the Protected Point to Point
      ([P3]) solution by building a protected tunnel between the
      endpoints in which the information about frame key updating can be
      safely passed across.  This can be useful, for example, when we
      wish the adversary not to detect the key change during the
      protocol evaluation.

5.2.  Parallel Constructions

   External parallel re-keying mechanisms generate frame keys K^1, K^2,
   ... directly from the initial key K independently of each other.

   The main idea behind external re-keying with a parallel construction
   is presented in Figure 4:









Smyshlyaev              Expires September 1, 2018              [Page 13]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   Maximum message size = m_max.
   _____________________________________________________________

                                   m_max
                             <---------------->
                   M^{1,1}   |===             |
                   M^{1,2}   |=============== |
         +->K^1-->   ...            ...
         |         M^{1,q_1} |========        |
         |
         |
         |         M^{2,1}   |================|
         |         M^{2,2}   |=====           |
   K-----|->K^2-->   ...            ...
         |         M^{2,q_2} |==========      |
         |
        ...
         |         M^{t,1}   |============    |
         |         M^{t,2}   |=============   |
         +->K^t-->   ...            ...
                   M^{t,q_t} |==========      |

   _____________________________________________________________

          Figure 4: External parallel re-keying mechanisms


   The frame key K^i, i = 1, ... , t-1, is updated after processing a
   certain amount of messages (see Section 5.1).

5.2.1.  Parallel Construction Based on a KDF on a Block Cipher

   ExtParallelC re-keying mechanism is based on the key derivation
   function on a block cipher and is used to generate t frame keys as
   follows:

      K^1 | K^2 | ... | K^t = ExtParallelC(K, t * k) = MSB_{t *
      k}(E_{K}(Vec_n(0)) |
      E_{K}(Vec_n(1)) | ... | E_{K}(Vec_n(R - 1))),

   where R = ceil(t * k/n).

5.2.2.  Parallel Construction Based on a KDF on a Hash Function

   ExtParallelH re-keying mechanism is based on the key derivation
   function HKDF-Expand, described in [RFC5869], and is used to generate
   t frame keys as follows:




Smyshlyaev              Expires September 1, 2018              [Page 14]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


      K^1 | K^2 | ... | K^t = ExtParallelH(K, t * k) = HKDF-Expand(K,
      label, t * k),

   where label is a string (may be a zero-length string) that is defined
   by a specific protocol.

5.2.3.  Tree-based Construction

   The application of external tree-based mechanism leads to the
   construction of the key tree with the initial key K (root key) at the
   0-level and the frame keys K^1, K^2, ... at the last level as
   described in Figure 6.



                             K_root = K
                      ___________|___________
                     |          ...          |
                     V                       V
                    K{1,1}                K{1,W1}
               ______|______           ______|______
              |     ...     |         |     ...     |
              V             V         V             V
           K{2,1}       K{2,W2}  K{2,(W1-1)*W2+1} K{2,W1*W2}
            __|__         __|__     __|__         __|__
           | ... |       | ... |   | ... |       | ... |
           V     V       V     V   V     V       V     V
        K{3,1}  ...     ...   ... ...   ...     ...   K{3,W1*W2*W3}

       ...                                             ...
      __|__                     ...                   __|__
     | ... |                                         | ... |
     V     V                                         V     V
 K{h,1}   K{h,Wh}            K{h,(W1*...*W{h-1}-1)*Wh+1}  K{h,W1*...*Wh}
   //       \\                                     //       \\
 K^1       K^{Wh}           K^{(W1*...*W{h-1}-1)*Wh+1}     K^{W1*...*Wh}
 _______________________________________________________________________

                    Figure 6: External Tree-based Mechanism


   The tree height h and the number of keys Wj, j in {1, ... , h}, which
   can be partitioned from "parent" key, are defined in accordance with
   a specific protocol and key lifetime limitations for the used
   derivation functions.

   Each j-level key K{j,w}, where j in {1, ... , h}, w in {1, ... , W1 *
   ... * Wj}, is derived from the (j-1)-level "parent" key K{j-1,ceil(w/



Smyshlyaev              Expires September 1, 2018              [Page 15]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   Wi)} (and other appropriate input data) using the j-th level
   derivation function that can be based on the block cipher function or
   on the hash function and that is defined in accordance with a
   specific protocol.

   The i-th frame K^i, i in {1, 2, ... , W1*...*Wh}, can be calculated
   as follows:

      K^i = ExtKeyTree(K, i) = KDF_h(KDF_{h-1}(... KDF_1(K, ceil(i / (W2
      * ... * Wh)) ... , ceil(i / Wh)), i),

   where KDF_j is the j-th level derivation function that takes two
   arguments (the parent key value and the integer in range from 1 to W1
   * ... * Wj) and outputs the j-th level key value.

   The frame key K^i is updated after processing a certain amount of
   messages (see Section 5.1).

   In order to create an efficient implementation, during frame key K^i
   generation the derivation functions KDF_j, j in {1, ... , h-1},
   should be used only in case when ceil(i / (W{j+1} * ... * Wh)) !=
   ceil((i - 1) / (W{j+1} * ... * Wh)); otherwise it is necessary to use
   previously generated value.  This approach also makes it possible to
   take countermeasures against side channels attacks.

   Consider an example.  Suppose h = 3, W1 = W2 = W3 = W and KDF_1,
   KDF_2, KDF_3 are key derivation functions based on the
   KDF_GOSTR3411_2012_256 (hereafter simply KDF) function described in
   [RFC7836].  The resulting ExtKeyTree function can be defined as
   follows:

      ExtKeyTree(K, i) = KDF(KDF(KDF(K, "level1", ceil(i / W^2)),
      "level2", ceil(i / W)), "level3", i).

   where i in {1, 2, ... , W^3}.

   The structure similar to external tree-based mechanism can be found
   in Section 6 of [NISTSP800-108].

5.3.  Serial Constructions

   External serial re-keying mechanisms generate frame keys, each of
   which depends on the secret state (K*_1, K*_2, ..., see Figure 5)
   that is updated after the generation of each new frame key.  Similar
   approaches are used in the [SIGNAL] protocol, in the [TLSDraft]
   updating traffic keys mechanism and were proposed for use in the
   [U2F] protocol.




Smyshlyaev              Expires September 1, 2018              [Page 16]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   External serial re-keying mechanisms have the obvious disadvantage of
   the impossibility to be implemented in parallel, but they can be
   preferred if additional forward secrecy is desirable: in case all
   keys are securely deleted after usage, compromise of a current secret
   state at some time does not lead to a compromise of all previous
   secret states and frame keys.  In terms of [TLSDraft], compromise of
   application_traffic_secret_N does not compromise all previous
   application_traffic_secret_i, i < N.

   The main idea behind external re-keying with a serial construction is
   presented in Figure 5:


   Maximum message size = m_max.
   _____________________________________________________________
                                        m_max
                                  <---------------->
                        M^{1,1}   |===             |
                        M^{1,2}   |=============== |
   K*_1 = K --->K^1-->    ...            ...
     |                  M^{1,q_1} |========        |
     |
     |
     |                  M^{2,1}   |================|
     v                  M^{2,2}   |=====           |
   K*_2 ------->K^2-->    ...            ...
     |                  M^{2,q_2} |==========      |
     |
    ...
     |                  M^{t,1}   |============    |
     v                  M^{t,2}   |=============   |
   K*_t ------->K^t-->    ...            ...
                        M^{t,q_t} |==========      |


   _____________________________________________________________

          Figure 5: External serial re-keying mechanisms


   The frame key K^i, i = 1, ... , t - 1, is updated after processing a
   certain amount of messages (see Section 5.1).

5.3.1.  Serial Construction Based on a KDF on a Block Cipher

   The frame key K^i is calculated using ExtSerialC transformation as
   follows:




Smyshlyaev              Expires September 1, 2018              [Page 17]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


      K^i = ExtSerialC(K, i) =
      MSB_k(E_{K*_i}(Vec_n(0)) |E_{K*_i}(Vec_n(1)) | ... |
      E_{K*_i}(Vec_n(J - 1))),

   where J = ceil(k / n), i = 1, ... , t, K*_i is calculated as follows:

      K*_1 = K,

      K*_{j+1} = MSB_k(E_{K*_j}(Vec_n(J)) | E_{K*_j}(Vec_n(J + 1)) |
      ... |
      E_{K*_j}(Vec_n(2 * J - 1))),

   where j = 1, ... , t - 1.

5.3.2.  Serial Construction Based on a KDF on a Hash Function

   The frame key K^i is calculated using ExtSerialH transformation as
   follows:

      K^i = ExtSerialH(K, i) = HKDF-Expand(K*_i, label1, k),

   where i = 1, ... , t, HKDF-Expand is the HMAC-based key derivation
   function, described in [RFC5869], K*_i is calculated as follows:

      K*_1 = K,

      K*_{j+1} = HKDF-Expand(K*_j, label2, k), where j = 1, ... , t - 1,

   where label1 and label2 are different strings from V* that are
   defined by a specific protocol (see, for example, TLS 1.3 updating
   traffic keys algorithm [TLSDraft]).

5.4.  Exploiting Additional Entropy on Re-keying

   In many cases exploiting additional entropy on re-keying won't
   increase security, but may give a false sense of that, therefore
   relying on additional entropy must be done with deep studying
   security in various security models.  For example, good PRF
   constructions do not require additional entropy for the quality of
   keys so in the most cases there is no need for exploiting additional
   entropy on external re-keying mechanisms based on secure KDF.
   However, in some situations mixed-in entropy can still increase
   security in the case of a time-limited but complete breach of the
   system, when adversary can access to the frame keys generation
   interface, but cannot reveal master keys (master keys are stored in
   an HSM).





Smyshlyaev              Expires September 1, 2018              [Page 18]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   For example, an external parallel construction based on a KDF on a
   Hash function with a mixed-in entropy can be described as follows:

      K^i = HKDF-Expand(K, label_i, k),

   where label_i is additional entropy that must be sent to the
   recipient (e.g., be sent jointly with encrypted message).  The
   entropy label_i and the corresponding key K^i must be generated
   directly before message processing.

6.  Internal Re-keying Mechanisms

   This section presents an approach to increase the key lifetime by
   using a transformation of a data processing key (section key) during
   each separate message processing.  Each message is processed starting
   with the same key (the first section key) and each section key is
   updated after processing N bits of message (section).

   This section provides internal re-keying mechanisms called ACPKM
   (Advanced Cryptographic Prolongation of Key Material) and ACPKM-
   Master that do not use a master key and use a master key
   respectively.  Such mechanisms are integrated into the base modes of
   operation and actually form new modes of operation, therefore they
   are called "internal re-keying" mechanisms in this document.

   Internal re-keying mechanisms are recommended to be used in protocols
   that process large single messages (e.g., CMS messages), since the
   maximum gain in increasing the key lifetime is achieved by increasing
   the length of a message, while it provides almost no increase in the
   number of messages that can be processed with one initial key.

   Internal re-keying increases the key lifetime through the following
   approach.  Suppose protocol P uses some base mode of operation.  Let
   L1 and L2 be a side channel and combinatorial limitations
   respectively and for some fixed amount of messages q let m1, m2 be
   the lengths of messages, that can be safely processed with a single
   initial key K according to these limitations.

   Thus, by analogy with the Section 5 without re-keying the final key
   lifetime restriction, as displayed in Figure 7, is equal to L1 and
   only q messages of the length m1 can be safely processed.










Smyshlyaev              Expires September 1, 2018              [Page 19]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


             K
             |
             v
   ^ +----------------+------------------------------------+
   | |==============L1|                                  L2|
   | |================|                                    |
   q |================|                                    |
   | |================|                                    |
   | |================|                                    |
   v +----------------+------------------------------------+
     <-------m1------->
     <----------------------------m2----------------------->

Figure 7: Basic principles of message processing without internal re-keying



   Suppose that the safety margin for the protocol P is fixed and
   internal re-keying approach is applied to the base mode of operation.
   Suppose further that every message is processed with a section key,
   which is transformed after processing N bits of data, where N is a
   parameter.  If q * N does not exceed L1 then the side channel
   limitation L1 goes off and the resulting key lifetime limitation of
   the initial key K can be calculated on the basis of a new
   combinatorial limitation L2'.  The security of the mode of operation
   that uses internal re-keying increases when compared to base mode of
   operation without re-keying (thus, L2 < L2').  Hence, as displayed in
   Figure 8, the resulting key lifetime limitation in case of using
   internal re-keying can be increased up to L2'.


  K-----> K^1-------------> K^2 -----------> . . .
          |                 |
          v                 v
^ +----------------+----------------+-------------------+--...--+
| |==============L1|==============L1|======           L2|    L2'|
| |================|================|======             |       |
q |================|================|====== . . .       |       |
| |================|================|======             |       |
| |================|================|======             |       |
v +----------------+----------------+-------------------+--...--+
  <-------N-------->

Figure 8: Basic principles of message processing with internal re-keying







Smyshlyaev              Expires September 1, 2018              [Page 20]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   Note: the key transformation process is depicted in a simplified
   form.  A specific approach (ACPKM and ACPKM-Master re-keying
   mechanisms) is described below.

   Since the performance of encryption can slightly decrease for rather
   small values of N, the parameter N should be selected for a
   particular protocol as maximum possible to provide necessary key
   lifetime for the considered security models.

   Consider an example.  Suppose L1 = 128 MB and L2 = 10 TB.  Let the
   message size in the protocol be large/unlimited (may exhaust the
   whole key lifetime L2).  The most restrictive resulting key lifetime
   limitation is equal to 128 MB.

   Thus, there is a need to put a limit on the maximum message size
   m_max.  For example, if m_max = 32 MB, it may happen that the
   renegotiation of initial key K would be required after processing
   only four messages.

   If an internal re-keying mechanism with section size N = 1 MB is
   used, more than L1 / N = 128 MB / 1 MB = 128 messages can be
   processed before the renegotiation of initial key K (instead of 4
   messages in case when an internal re-keying mechanism is not used).
   Note that only one section of each message is processed with the
   section key K^i, and, consequently, the key lifetime limitation L1
   goes off.  Hence the resulting key lifetime limitation L2' can be set
   to more then 10 TB (in the case when a single large message is
   processed using the initial key K).

6.1.  Methods of Key Lifetime Control

   Suppose L is an amount of data that can be safely processed with one
   section key, N is a section size (fixed parameter).  Suppose M^{i}_1
   is the first section of message M^{i}, i = 1, ... , q (see Figure 9
   and Figure 10), then the parameter q can be calculated in accordance
   with one of the following two approaches:

   o  Explicit approach:
      q_i is such that |M^{1}_1| + ... + |M^{q}_1| <= L, |M^{1}_1| + ...
      + |M^{q+1}_1| > L
      This approach allows to use the section key K^i in an almost
      optimal way but it can be applied only in case when messages
      cannot be lost or reordered (e.g., TLS records).

   o  Implicit approach:
      q = L / N.
      The amount of data processed with one section key K^i is
      calculated under the assumption that the length of every message



Smyshlyaev              Expires September 1, 2018              [Page 21]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


      is equal or greater than section size N and so it can be
      considerably less than the key lifetime limitation L.  On the
      other hand, this approach can be applied in case when messages may
      be lost or reordered (e.g., DTLS records).

6.2.  Constructions that Do Not Require Master Key

   This section describes the block cipher modes that use the ACPKM re-
   keying mechanism, which does not use a master key: an initial key is
   used directly for the data encryption.

6.2.1.  ACPKM Re-keying Mechanisms

   This section defines periodical key transformation without a master
   key, which is called ACPKM re-keying mechanism.  This mechanism can
   be applied to one of the base encryption modes (CTR and GCM block
   cipher modes) for getting an extension of this encryption mode that
   uses periodical key transformation without a master key.  This
   extension can be considered as a new encryption mode.

   An additional parameter that defines functioning of base encryption
   modes with the ACPKM re-keying mechanism is the section size N.  The
   value of N is measured in bits and is fixed within a specific
   protocol based on the requirements of the system capacity and the key
   lifetime.  The section size N MUST be divisible by the block size n.

   The main idea behind internal re-keying without a master key is
   presented in Figure 9:























Smyshlyaev              Expires September 1, 2018              [Page 22]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   Section size = const = N,
   maximum message size = m_max.
   ____________________________________________________________________

                 ACPKM       ACPKM              ACPKM
          K^1 = K ---> K^2 ---...-> K^{l_max-1} ----> K^{l_max}
              |          |                |           |
              |          |                |           |
              v          v                v           v
   M^{1} |==========|==========| ... |==========|=======:  |
   M^{2} |==========|==========| ... |===       |       :  |
     .        .          .        .       .          .  :
     :        :          :        :       :          :  :
   M^{q} |==========|==========| ... |==========|=====  :  |
                      section                           :
                    <---------->                      m_max
                       N bit
   ___________________________________________________________________
   l_max = ceil(m_max/N).

               Figure 9: Internal re-keying without a master key


   During the processing of the input message M with the length m in
   some encryption mode that uses ACPKM key transformation of the
   initial key K the message is divided into l = ceil(m / N) sections
   (denoted as M = M_1 | M_2 | ... | M_l, where M_i is in V_N for i in
   {1, 2, ... , l - 1} and M_l is in V_r, r <= N).  The first section of
   each message is processed with the section key K^1 = K.  To process
   the (i + 1)-th section of each message the section key K^{i+1} is
   calculated using ACPKM transformation as follows:

      K^{i+1} = ACPKM(K^i) = MSB_k(E_{K^i}(D_1) | ... | E_{K^i}(D_J)),

   where J = ceil(k/n) and D_1, D_2, ... , D_J are in V_n and are
   calculated as follows:

      D_1 | D_2 | ... | D_J = MSB_{J * n}(D),

   where D is the following constant in V_{1024}:











Smyshlyaev              Expires September 1, 2018              [Page 23]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   D = ( 80 | 81 | 82 | 83 | 84 | 85 | 86 | 87
       | 88 | 89 | 8a | 8b | 8c | 8d | 8e | 8f
       | 90 | 91 | 92 | 93 | 94 | 95 | 96 | 97
       | 98 | 99 | 9a | 9b | 9c | 9d | 9e | 9f
       | a0 | a1 | a2 | a3 | a4 | a5 | a6 | a7
       | a8 | a9 | aa | ab | ac | ad | ae | af
       | b0 | b1 | b2 | b3 | b4 | b5 | b6 | b7
       | b8 | b9 | ba | bb | bc | bd | be | bf
       | c0 | c1 | c2 | c3 | c4 | c5 | c6 | c7
       | c8 | c9 | ca | cb | cc | cd | ce | cf
       | d0 | d1 | d2 | d3 | d4 | d5 | d6 | d7
       | d8 | d9 | da | db | dc | dd | de | df
       | e0 | e1 | e2 | e3 | e4 | e5 | e6 | e7
       | e8 | e9 | ea | eb | ec | ed | ee | ef
       | f0 | f1 | f2 | f3 | f4 | f5 | f6 | f7
       | f8 | f9 | fa | fb | fc | fd | fe | ff )

   N o t e : The constant D is such that D_1, ... , D_J are pairwise
   different for any allowed n and k values.

   N o t e : The constant D is such that the highest bit of its each
   octet is equal to 1.  This condition is important, as in conjunction
   with a certain mode message length limitation it allows to prevent
   collisions of block cipher permutation inputs in cases of key
   transformation and message processing (for more details see
   Section 4.4 of [AAOS2017]).

6.2.2.  CTR-ACPKM Encryption Mode

   This section defines a CTR-ACPKM encryption mode that uses the ACPKM
   internal re-keying mechanism for the periodical key transformation.

   The CTR-ACPKM mode can be considered as the base encryption mode CTR
   (see [MODES]) extended by the ACPKM re-keying mechanism.

   The CTR-ACPKM encryption mode can be used with the following
   parameters:

   o  64 <= n <= 512;

   o  128 <= k <= 512;

   o  the number c of bits in a specific part of the block to be
      incremented is such that 32 <= c <= 3 / 4 n, c is a multiple of 8;

   o  the maximum message size m_max = n * 2^{c-1}.





Smyshlyaev              Expires September 1, 2018              [Page 24]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   The CTR-ACPKM mode encryption and decryption procedures are defined
   as follows:


   +----------------------------------------------------------------+
   |  CTR-ACPKM-Encrypt(N, K, ICN, P)                               |
   |----------------------------------------------------------------|
   |  Input:                                                        |
   |  - section size N,                                             |
   |  - initial key K,                                              |
   |  - initial counter nonce ICN in V_{n-c},                       |
   |  - plaintext P = P_1 | ... | P_b, |P| <= m_max.                |
   |  Output:                                                       |
   |  - ciphertext C.                                               |
   |----------------------------------------------------------------|
   |  1. CTR_1 = ICN | 0^c                                          |
   |  2. For j = 2, 3, ... , b do                                   |
   |         CTR_{j} = Inc_c(CTR_{j-1})                             |
   |  3. K^1 = K                                                    |
   |  4. For i = 2, 3, ... , ceil(|P| / N)                          |
   |         K^i = ACPKM(K^{i-1})                                   |
   |  5. For j = 1, 2, ... , b do                                   |
   |         i = ceil(j * n / N),                                   |
   |         G_j = E_{K^i}(CTR_j)                                   |
   |  6. C = P (xor) MSB_{|P|}(G_1 | ... | G_b)                     |
   |  7. Return C                                                   |
   +----------------------------------------------------------------+

   +----------------------------------------------------------------+
   |  CTR-ACPKM-Decrypt(N, K, ICN, C)                               |
   |----------------------------------------------------------------|
   |  Input:                                                        |
   |  - section size N,                                             |
   |  - initial key K,                                              |
   |  - initial counter nonce ICN in V_{n-c},                       |
   |  - ciphertext C = C_1 | ... | C_b, |C| <= m_max.               |
   |  Output:                                                       |
   |  - plaintext P.                                                |
   |----------------------------------------------------------------|
   |  1. P = CTR-ACPKM-Encrypt(N, K, ICN, C)                        |
   |  2. Return P                                                   |
   +----------------------------------------------------------------+

   The initial counter nonce ICN value for each message that is
   encrypted under the given initial key K must be chosen in a unique
   manner.





Smyshlyaev              Expires September 1, 2018              [Page 25]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


6.2.3.  GCM-ACPKM Authenticated Encryption Mode

   This section defines GCM-ACPKM authenticated encryption mode that
   uses the ACPKM internal re-keying mechanism for the periodical key
   transformation.

   The GCM-ACPKM mode can be considered as the base authenticated
   encryption mode GCM (see [GCM]) extended by the ACPKM re-keying
   mechanism.

   The GCM-ACPKM authenticated encryption mode can be used with the
   following parameters:

   o  n in {128, 256};

   o  128 <= k <= 512;

   o  the number c of bits in a specific part of the block to be
      incremented is such that 1 / 4 n <= c <= 1 / 2 n, c is a multiple
      of 8;

   o  authentication tag length t;

   o  the maximum message size m_max = min{n * (2^{c-1} - 2), 2^{n/2} -
      1}.

   The GCM-ACPKM mode encryption and decryption procedures are defined
   as follows:


   +-------------------------------------------------------------------+
   |  GHASH(X, H)                                                      |
   |-------------------------------------------------------------------|
   |  Input:                                                           |
   |  - bit string X = X_1 | ... | X_m, X_1, ... , X_m in V_n.         |
   |  Output:                                                          |
   |  - block GHASH(X, H) in V_n.                                      |
   |-------------------------------------------------------------------|
   |  1. Y_0 = 0^n                                                     |
   |  2. For i = 1, ... , m do                                         |
   |         Y_i = (Y_{i-1} (xor) X_i) * H                             |
   |  3. Return Y_m                                                    |
   +-------------------------------------------------------------------+

   +-------------------------------------------------------------------+
   |  GCTR(N, K, ICB, X)                                               |
   |-------------------------------------------------------------------|
   |  Input:                                                           |



Smyshlyaev              Expires September 1, 2018              [Page 26]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   |  - section size N,                                                |
   |  - initial key K,                                                 |
   |  - initial counter block ICB,                                     |
   |  - X = X_1 | ... | X_b.                                           |
   |  Output:                                                          |
   |  - Y in V_{|X|}.                                                  |
   |-------------------------------------------------------------------|
   |  1. If X in V_0 then return Y, where Y in V_0                     |
   |  2. GCTR_1 = ICB                                                  |
   |  3. For i = 2, ... , b do                                         |
   |         GCTR_i = Inc_c(GCTR_{i-1})                                |
   |  4. K^1 = K                                                       |
   |  5. For j = 2, ... , ceil(|X| / N)                                |
   |         K^j = ACPKM(K^{j-1})                                      |
   |  6. For i = 1, ... , b do                                         |
   |         j = ceil(i * n / N),                                      |
   |         G_i = E_{K_j}(GCTR_i)                                     |
   |  7. Y = X (xor) MSB_{|X|}(G_1 | ... | G_b)                        |
   |  8. Return Y                                                      |
   +-------------------------------------------------------------------+

   +-------------------------------------------------------------------+
   |  GCM-ACPKM-Encrypt(N, K, ICN, P, A)                               |
   |-------------------------------------------------------------------|
   |  Input:                                                           |
   |  - section size N,                                                |
   |  - initial key K,                                                 |
   |  - initial counter nonce ICN in V_{n-c},                          |
   |  - plaintext P = P_1 | ... | P_b, |P| <= m_max,                   |
   |  - additional authenticated data A.                               |
   |  Output:                                                          |
   |  - ciphertext C,                                                  |
   |  - authentication tag T.                                          |
   |-------------------------------------------------------------------|
   |  1. H = E_{K}(0^n)                                                |
   |  2. ICB_0 = ICN | 0^{c-1} | 1                                     |
   |  3. C = GCTR(N, K, Inc_c(ICB_0), P)                               |
   |  4. u = n * ceil(|C| / n) - |C|                                   |
   |     v = n * ceil(|A| / n) - |A|                                   |
   |  5. S = GHASH(A | 0^v | C | 0^u | Vec_{n/2}(|A|) |                |
   |               | Vec_{n/2}(|C|), H)                                |
   |  6. T = MSB_t(E_{K}(ICB_0) (xor) S)                               |
   |  7. Return C | T                                                  |
   +-------------------------------------------------------------------+

   +-------------------------------------------------------------------+
   |  GCM-ACPKM-Decrypt(N, K, ICN, A, C, T)                            |
   |-------------------------------------------------------------------|



Smyshlyaev              Expires September 1, 2018              [Page 27]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   |  Input:                                                           |
   |  - section size N,                                                |
   |  - initial key K,                                                 |
   |  - initial counter block ICN,                                     |
   |  - additional authenticated data A,                               |
   |  - ciphertext C = C_1 | ... | C_b, |C| <= m_max,                  |
   |  - authentication tag T.                                          |
   |  Output:                                                          |
   |  - plaintext P or FAIL.                                           |
   |-------------------------------------------------------------------|
   |  1. H = E_{K}(0^n)                                                |
   |  2. ICB_0 = ICN | 0^{c-1} | 1                                     |
   |  3. P = GCTR(N, K, Inc_c(ICB_0), C)                               |
   |  4. u = n * ceil(|C| / n) - |C|                                   |
   |     v = n * ceil(|A| / n) - |A|                                   |
   |  5. S = GHASH(A | 0^v | C | 0^u | Vec_{n/2}(|A|) |                |
   |               | Vec_{n/2}(|C|), H)                                |
   |  6. T' = MSB_t(E_{K}(ICB_0) (xor) S)                              |
   |  7. If T = T' then return P; else return FAIL                     |
   +-------------------------------------------------------------------+

   The * operation on (pairs of) the 2^n possible blocks corresponds to
   the multiplication operation for the binary Galois (finite) field of
   2^n elements defined by the polynomial f as follows (by analogy with
   [GCM]):

   n = 128:  f = a^128 + a^7 + a^2 + a^1 + 1,

   n = 256:  f = a^256 + a^10 + a^5 + a^2 + 1.

   The initial vector IV value for each message that is encrypted under
   the given initial key K must be chosen in a unique manner.

   The key for computing values E_{K}(ICB_0) and H is not updated and is
   equal to the initial key K.

6.3.  Constructions that Require Master Key

   This section describes the block cipher modes that use the ACPKM-
   Master re-keying mechanism, which use the initial key K as a master
   key, so K is never used directly for data processing but is used for
   key derivation.

6.3.1.  ACPKM-Master Key Derivation from the Master Key

   This section defines periodical key transformation with a master key,
   which is called ACPKM-Master re-keying mechanism.  This mechanism can
   be applied to one of the base modes of operation (CTR, GCM, CBC, CFB,



Smyshlyaev              Expires September 1, 2018              [Page 28]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   OMAC modes) for getting an extension that uses periodical key
   transformation with a master key.  This extension can be considered
   as a new mode of operation.

   Additional parameters that define the functioning of modes of
   operation that use the ACPKM-Master re-keying mechanism are the
   section size N, the change frequency T* of the master keys K*_1,
   K*_2, ... (see Figure 10) and the size d of the section key material.
   The values of N and T* are measured in bits and are fixed within a
   specific protocol, based on the requirements of the system capacity
   and the key lifetime.  The section size N MUST be divisible by the
   block size n.  The master key frequency T* MUST be divisible by d and
   by n.

   The main idea behind internal re-keying with a master key is
   presented in Figure 10:



Master key frequency T*,
section size N,
maximum message size = m_max.
__________________________________________________________________________________

                            ACPKM                   ACPKM
               K*_1 = K--------------> K*_2 ---------...---------> K*_l_max
              ___|___                ___|___                     ___|___
             |       |              |       |                   |       |
             v  ...  v              v  ...  v                   v  ...  v
            K[1]     K[t]        K[t+1]   K[2t]      K[(l_max-1)t+1]   K[l_max*t]
             |       |              |       |                   |       |
             |       |              |       |                   |       |
             v       v              v       v                   v       v
M^{1}||========|...|========||========|...|========||...||========|...|==    : ||
M^{2}||========|...|========||========|...|========||...||========|...|======: ||
 ... ||        |   |        ||        |   |        ||   ||        |   |      : ||
M^{q}||========|...|========||====    |...|        ||...||        |...|      : ||
       section                                                               :
      <-------->                                                             :
         N bit                                                             m_max
__________________________________________________________________________________
|K[i]| = d,
t = T* / d,
l_max = ceil(m_max / (N * t)).

                   Figure 10: Internal re-keying with a master key





Smyshlyaev              Expires September 1, 2018              [Page 29]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   During the processing of the input message M with the length m in
   some mode of operation that uses ACPKM-Master key transformation with
   the initial key K and the master key frequency T* the message M is
   divided into l = ceil(m / N) sections (denoted as M = M_1 | M_2 |
   ... | M_l, where M_i is in V_N for i in {1, 2, ... , l - 1} and M_l
   is in V_r, r <= N).  The j-th section of each message is processed
   with the key material K[j], j in {1, ... , l}, |K[j]| = d, that is
   calculated with the ACPKM-Master algorithm as follows:

      K[1] | ... | K[l] = ACPKM-Master(T*, K, d, l) = CTR-ACPKM-Encrypt
      (T*, K, 1^{n/2}, 0^{d*l}).

   Note: the parameters d and l MUST be such that d * l <= n *
   2^{n/2-1}.

6.3.2.  CTR-ACPKM-Master Encryption Mode

   This section defines a CTR-ACPKM-Master encryption mode that uses the
   ACPKM-Master internal re-keying mechanism for the periodical key
   transformation.

   The CTR-ACPKM-Master encryption mode can be considered as the base
   encryption mode CTR (see [MODES]) extended by the ACPKM-Master re-
   keying mechanism.

   The CTR-ACPKM-Master encryption mode can be used with the following
   parameters:

   o  64 <= n <= 512;

   o  128 <= k <= 512;

   o  the number c of bits in a specific part of the block to be
      incremented is such that 32 <= c <= 3 / 4 n, c is a multiple of 8;

   o  the maximum message size m_max = min{N * (n * 2^{n/2-1} / k), n *
      2^c}.

   The key material K[j] that is used for one section processing is
   equal to K^j, |K^j| = k bits.

   The CTR-ACPKM-Master mode encryption and decryption procedures are
   defined as follows:








Smyshlyaev              Expires September 1, 2018              [Page 30]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   +----------------------------------------------------------------+
   |  CTR-ACPKM-Master-Encrypt(N, K, T*, ICN, P)                    |
   |----------------------------------------------------------------|
   |  Input:                                                        |
   |  - section size N,                                             |
   |  - initial key K,                                              |
   |  - master key frequency T*,                                    |
   |  - initial counter nonce ICN in V_{n-c},                       |
   |  - plaintext P = P_1 | ... | P_b, |P| <= m_max.                |
   |  Output:                                                       |
   |  - ciphertext C.                                               |
   |----------------------------------------------------------------|
   |  1. CTR_1 = ICN | 0^c                                          |
   |  2. For j = 2, 3, ... , b do                                   |
   |         CTR_{j} = Inc_c(CTR_{j-1})                             |
   |  3. l = ceil(|P| / N)                                          |
   |  4. K^1 | ... | K^l = ACPKM-Master(T*, K, k, l)                |
   |  5. For j = 1, 2, ... , b do                                   |
   |         i = ceil(j * n / N),                                   |
   |         G_j = E_{K^i}(CTR_j)                                   |
   |  6. C = P (xor) MSB_{|P|}(G_1 | ... |G_b)                      |
   |  7. Return C                                                   |
   |----------------------------------------------------------------+

   +----------------------------------------------------------------+
   |  CTR-ACPKM-Master-Decrypt(N, K, T*, ICN, C)                    |
   |----------------------------------------------------------------|
   |  Input:                                                        |
   |  - section size N,                                             |
   |  - initial key K,                                              |
   |  - master key frequency T*,                                    |
   |  - initial counter nonce ICN in V_{n-c},                       |
   |  - ciphertext C = C_1 | ... | C_b, |C| <= m_max.               |
   |  Output:                                                       |
   |  - plaintext P.                                                |
   |----------------------------------------------------------------|
   |  1. P = CTR-ACPKM-Master-Encrypt(N, K, T*, ICN, C)             |
   |  1. Return P                                                   |
   +----------------------------------------------------------------+

   The initial counter nonce ICN value for each message that is
   encrypted under the given initial key must be chosen in a unique
   manner.








Smyshlyaev              Expires September 1, 2018              [Page 31]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


6.3.3.  GCM-ACPKM-Master Authenticated Encryption Mode

   This section defines a GCM-ACPKM-Master authenticated encryption mode
   that uses the ACPKM-Master internal re-keying mechanism for the
   periodical key transformation.

   The GCM-ACPKM-Master authenticated encryption mode can be considered
   as the base authenticated encryption mode GCM (see [GCM]) extended by
   the ACPKM-Master re-keying mechanism.

   The GCM-ACPKM-Master authenticated encryption mode can be used with
   the following parameters:

   o  n in {128, 256};

   o  128 <= k <= 512;

   o  the number c of bits in a specific part of the block to be
      incremented is such that 1 / 4 n <= c <= 1 / 2 n, c is a multiple
      of 8;

   o  authentication tag length t;

   o  the maximum message size m_max = min{N * ( n * 2^{n/2-1} / k), n *
      (2^c - 2), 2^{n/2} - 1}.

   The key material K[j] that is used for the j-th section processing is
   equal to K^j, |K^j| = k bits.

   The GCM-ACPKM-Master mode encryption and decryption procedures are
   defined as follows:


   +-------------------------------------------------------------------+
   |  GHASH(X, H)                                                      |
   |-------------------------------------------------------------------|
   |  Input:                                                           |
   |  - bit string X = X_1 | ... | X_m, X_i in V_n for i in {1, ... ,m}|
   |  Output:                                                          |
   |  - block GHASH(X, H) in V_n                                       |
   |-------------------------------------------------------------------|
   |  1. Y_0 = 0^n                                                     |
   |  2. For i = 1, ... , m do                                         |
   |         Y_i = (Y_{i-1} (xor) X_i) * H                             |
   |  3. Return Y_m                                                    |
   +-------------------------------------------------------------------+

   +-------------------------------------------------------------------+



Smyshlyaev              Expires September 1, 2018              [Page 32]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   |  GCTR(N, K, T*, ICB, X)                                           |
   |-------------------------------------------------------------------|
   |  Input:                                                           |
   |  - section size N,                                                |
   |  - initial key K,                                                 |
   |  - master key frequency T*,                                       |
   |  - initial counter block ICB,                                     |
   |  - X = X_1 | ... | X_b.                                           |
   |  Output:                                                          |
   |  - Y in V_{|X|}.                                                  |
   |-------------------------------------------------------------------|
   |  1. If X in V_0 then return Y, where Y in V_0                     |
   |  2. GCTR_1 = ICB                                                  |
   |  3. For i = 2, ... , b do                                         |
   |         GCTR_i = Inc_c(GCTR_{i-1})                                |
   |  4. l = ceil(|X| / N)                                             |
   |  5. K^1 | ... | K^l = ACPKM-Master(T*, K, k, l)                   |
   |  6. For j = 1, ... , b do                                         |
   |         i = ceil(j * n / N),                                      |
   |         G_j = E_{K^i}(GCTR_j)                                     |
   |  7. Y = X (xor) MSB_{|X|}(G_1 | ... | G_b)                        |
   |  8. Return Y                                                      |
   +-------------------------------------------------------------------+

   +-------------------------------------------------------------------+
   |  GCM-ACPKM-Master-Encrypt(N, K, T*, ICN, P, A)                    |
   |-------------------------------------------------------------------|
   |  Input:                                                           |
   |  - section size N,                                                |
   |  - initial key K,                                                 |
   |  - master key frequency T*,                                       |
   |  - initial counter nonce ICN in V_{n-c},                          |
   |  - plaintext P = P_1 | ... | P_b, |P| <= m_max.                   |
   |  - additional authenticated data A.                               |
   |  Output:                                                          |
   |  - ciphertext C,                                                  |
   |  - authentication tag T.                                          |
   |-------------------------------------------------------------------|
   |  1. K^1 = ACPKM-Master(T*, K, k, 1)                               |
   |  2. H = E_{K^1}(0^n)                                              |
   |  3. ICB_0 = ICN | 0^{c-1} | 1                                     |
   |  4. C = GCTR(N, K, T*, Inc_c(ICB_0), P)                           |
   |  5. u = n * ceil(|C| / n) - |C|                                   |
   |     v = n * ceil(|A| / n) - |A|                                   |
   |  6. S = GHASH(A | 0^v | C | 0^u | Vec_{n/2}(|A|) |                |
   |               | Vec_{n/2}(|C|), H)                                |
   |  7. T = MSB_t(E_{K^1}(ICB_0) (xor) S)                             |
   |  8. Return C | T                                                  |



Smyshlyaev              Expires September 1, 2018              [Page 33]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   +-------------------------------------------------------------------+

   +-------------------------------------------------------------------+
   |  GCM-ACPKM-Master-Decrypt(N, K, T*, ICN, A, C, T)                 |
   |-------------------------------------------------------------------|
   |  Input:                                                           |
   |  - section size N,                                                |
   |  - initial key K,                                                 |
   |  - master key frequency T*,                                       |
   |  - initial counter nonce ICN in V_{n-c},                          |
   |  - additional authenticated data A.                               |
   |  - ciphertext C = C_1 | ... | C_b, |C| <= m_max,                  |
   |  - authentication tag T.                                          |
   |  Output:                                                          |
   |  - plaintext P or FAIL.                                           |
   |-------------------------------------------------------------------|
   |  1. K^1 = ACPKM-Master(T*, K, k, 1)                               |
   |  2. H = E_{K^1}(0^n)                                              |
   |  3. ICB_0 = ICN | 0^{c-1} | 1                                     |
   |  4. P = GCTR(N, K, T*, Inc_c(ICB_0), C)                           |
   |  5. u = n * ceil(|C| / n) - |C|                                   |
   |     v = n * ceil(|A| / n) - |A|                                   |
   |  6. S = GHASH(A | 0^v | C | 0^u | Vec_{n/2}(|A|) |                |
   |               | Vec_{n/2}(|C|), H)                                |
   |  7. T' = MSB_t(E_{K^1}(ICB_0) (xor) S)                            |
   |  8. IF T = T' then return P; else return FAIL.                    |
   +-------------------------------------------------------------------+

   The * operation on (pairs of) the 2^n possible blocks corresponds to
   the multiplication operation for the binary Galois (finite) field of
   2^n elements defined by the polynomial f as follows (by analogy with
   [GCM]):

   n = 128:  f = a^128 + a^7 + a^2 + a^1 + 1,

   n = 256:  f = a^256 + a^10 + a^5 + a^2 + 1.

   The initial vector IV value for each message that is encrypted under
   the given initial key must be chosen in a unique manner.

6.3.4.  CBC-ACPKM-Master Encryption Mode

   This section defines a CBC-ACPKM-Master encryption mode that uses the
   ACPKM-Master internal re-keying mechanism for the periodical key
   transformation.






Smyshlyaev              Expires September 1, 2018              [Page 34]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   The CBC-ACPKM-Master encryption mode can be considered as the base
   encryption mode CBC (see [MODES]) extended by the ACPKM-Master re-
   keying mechanism.

   The CBC-ACPKM-Master encryption mode can be used with the following
   parameters:

   o  64 <= n <= 512;

   o  128 <= k <= 512;

   o  the maximum message size m_max = N * (n * 2^{n/2-1} / k).

   In the specification of the CBC-ACPKM-Master mode the plaintext and
   ciphertext must be a sequence of one or more complete data blocks.
   If the data string to be encrypted does not initially satisfy this
   property, then it MUST be padded to form complete data blocks.  The
   padding methods are out of the scope of this document.  An example of
   a padding method can be found in Appendix A of [MODES].

   The key material K[j] that is used for the j-th section processing is
   equal to K^j, |K^j| = k bits.

   We will denote by D_{K} the decryption function which is a
   permutation inverse to E_{K}.

   The CBC-ACPKM-Master mode encryption and decryption procedures are
   defined as follows:























Smyshlyaev              Expires September 1, 2018              [Page 35]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   +----------------------------------------------------------------+
   |  CBC-ACPKM-Master-Encrypt(N, K, T*, IV, P)                     |
   |----------------------------------------------------------------|
   |  Input:                                                        |
   |  - section size N,                                             |
   |  - initial key K,                                              |
   |  - master key frequency T*,                                    |
   |  - initialization vector IV in V_n,                            |
   |  - plaintext P = P_1 | ... | P_b, |P_b| = n, |P| <= m_max.     |
   |  Output:                                                       |
   |  - ciphertext C.                                               |
   |----------------------------------------------------------------|
   |  1. l = ceil(|P| / N)                                          |
   |  2. K^1 | ... | K^l = ACPKM-Master(T*, K, k, l)                |
   |  3. C_0 = IV                                                   |
   |  4. For j = 1, 2, ... , b do                                   |
   |         i = ceil(j * n / N),                                   |
   |         C_j = E_{K^i}(P_j (xor) C_{j-1})                       |
   |  5. Return C = C_1 | ... | C_b                                 |
   |----------------------------------------------------------------+

   +----------------------------------------------------------------+
   |  CBC-ACPKM-Master-Decrypt(N, K, T*, IV, C)                     |
   |----------------------------------------------------------------|
   |  Input:                                                        |
   |  - section size N,                                             |
   |  - initial key K,                                              |
   |  - master key frequency T*,                                    |
   |  - initialization vector IV in V_n,                            |
   |  - ciphertext C = C_1 | ... | C_b, |C_b| = n, |C| <= m_max.    |
   |  Output:                                                       |
   |  - plaintext P.                                                |
   |----------------------------------------------------------------|
   |  1. l = ceil(|C| / N)                                          |
   |  2. K^1 | ... | K^l = ACPKM-Master(T*, K, k, l)                |
   |  3. C_0 = IV                                                   |
   |  4. For j = 1, 2, ... , b do                                   |
   |         i = ceil(j * n / N)                                    |
   |         P_j = D_{K^i}(C_j) (xor) C_{j-1}                       |
   |  5. Return P = P_1 | ... | P_b                                 |
   +----------------------------------------------------------------+

   The initialization vector IV for each message that is encrypted under
   the given initial key does not need to be secret, but must be
   unpredictable.






Smyshlyaev              Expires September 1, 2018              [Page 36]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


6.3.5.  CFB-ACPKM-Master Encryption Mode

   This section defines a CFB-ACPKM-Master encryption mode that uses the
   ACPKM-Master internal re-keying mechanism for the periodical key
   transformation.

   The CFB-ACPKM-Master encryption mode can be considered as the base
   encryption mode CFB (see [MODES]) extended by the ACPKM-Master re-
   keying mechanism.

   The CFB-ACPKM-Master encryption mode can be used with the following
   parameters:

   o  64 <= n <= 512;

   o  128 <= k <= 512;

   o  the maximum message size m_max = N * (n * 2^{n/2-1} / k).

   The key material K[j] that is used for the j-th section processing is
   equal to K^j, |K^j| = k bits.

   The CFB-ACPKM-Master mode encryption and decryption procedures are
   defined as follows:



























Smyshlyaev              Expires September 1, 2018              [Page 37]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   +-------------------------------------------------------------+
   |  CFB-ACPKM-Master-Encrypt(N, K, T*, IV, P)                  |
   |-------------------------------------------------------------|
   |  Input:                                                     |
   |  - section size N,                                          |
   |  - initial key K,                                           |
   |  - master key frequency T*,                                 |
   |  - initialization vector IV in V_n,                         |
   |  - plaintext P = P_1 | ... | P_b, |P| <= m_max.             |
   |  Output:                                                    |
   |  - ciphertext C.                                            |
   |-------------------------------------------------------------|
   |  1. l = ceil(|P| / N)                                       |
   |  2. K^1 | ... | K^l = ACPKM-Master(T*, K, k, l)             |
   |  3. C_0 = IV                                                |
   |  4. For j = 1, 2, ... , b - 1 do                            |
   |         i = ceil(j * n / N),                                |
   |         C_j = E_{K^i}(C_{j-1}) (xor) P_j                    |
   |  5. C_b = MSB_{|P_b|}(E_{K^l}(C_{b-1})) (xor) P_b           |
   |  6. Return C = C_1 | ... | C_b                              |
   |-------------------------------------------------------------+

   +-------------------------------------------------------------+
   |  CFB-ACPKM-Master-Decrypt(N, K, T*, IV, C)                  |
   |-------------------------------------------------------------|
   |  Input:                                                     |
   |  - section size N,                                          |
   |  - initial key K,                                           |
   |  - master key frequency T*,                                 |
   |  - initialization vector IV in V_n,                         |
   |  - ciphertext C = C_1 | ... | C_b, |C| <= m_max.            |
   |  Output:                                                    |
   |  - plaintext P.                                             |
   |-------------------------------------------------------------|
   |  1. l = ceil(|C| / N)                                       |
   |  2. K^1 | ... | K^l = ACPKM-Master(T*, K, k, l)             |
   |  3. C_0 = IV                                                |
   |  4. For j = 1, 2, ... , b - 1 do                            |
   |         i = ceil(j * n / N),                                |
   |         P_j = E_{K^i}(C_{j-1}) (xor) C_j                    |
   |  5. P_b = MSB_{|C_b|}(E_{K^l}(C_{b-1})) (xor) C_b           |
   |  6. Return P = P_1 | ... | P_b                              |
   +-------------------------------------------------------------+

   The initialization vector IV for each message that is encrypted under
   the given initial key need not to be secret, but must be
   unpredictable.




Smyshlyaev              Expires September 1, 2018              [Page 38]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


6.3.6.  OMAC-ACPKM-Master Authentication Mode

   This section defines an OMAC-ACPKM-Master message authentication code
   calculation mode that uses the ACPKM-Master internal re-keying
   mechanism for the periodical key transformation.

   The OMAC-ACPKM-Master mode can be considered as the base message
   authentication code calculation mode OMAC, which is also known as
   CMAC (see [RFC4493]), extended by the ACPKM-Master re-keying
   mechanism.

   The OMAC-ACPKM-Master message authentication code calculation mode
   can be used with the following parameters:

   o  n in {64, 128, 256};

   o  128 <= k <= 512;

   o  the maximum message size m_max = N * (n * 2^{n/2-1} / (k + n)).

   The key material K[j] that is used for one section processing is
   equal to K^j | K^j_1, where |K^j| = k and |K^j_1| = n.

   The following is a specification of the subkey generation process of
   OMAC:


   +-------------------------------------------------------------------+
   | Generate_Subkey(K1, r)                                            |
   |-------------------------------------------------------------------|
   | Input:                                                            |
   |  - key K1.                                                        |
   |  Output:                                                          |
   |  - key SK.                                                        |
   |-------------------------------------------------------------------|
   |   1. If r = n then return K1                                      |
   |   2. If r < n then                                                |
   |          if MSB_1(K1) = 0                                         |
   |              return K1 << 1                                       |
   |          else                                                     |
   |              return (K1 << 1) (xor) R_n                           |
   |                                                                   |
   +-------------------------------------------------------------------+

   Here R_n takes the following values:

   o  n = 64: R_{64} = 0^{59} | 11011;




Smyshlyaev              Expires September 1, 2018              [Page 39]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   o  n = 128: R_{128} = 0^{120} | 10000111;

   o  n = 256: R_{256} = 0^{145} | 10000100101.

   The OMAC-ACPKM-Master message authentication code calculation mode is
   defined as follows:


+----------------------------------------------------------------------+
| OMAC-ACPKM-Master(K, N, T*, M)                                       |
|----------------------------------------------------------------------|
| Input:                                                               |
|  - section size N,                                                   |
|  - initial key K,                                                    |
|  - master key frequency T*,                                          |
|  - plaintext M = M_1 | ... | M_b, |M| <= m_max.                      |
|  Output:                                                             |
|  - message authentication code T.                                    |
|----------------------------------------------------------------------|
| 1. C_0 = 0^n                                                         |
| 2. l = ceil(|M| / N)                                                 |
| 3. K^1 | K^1_1 | ... | K^l | K^l_1 = ACPKM-Master(T*, K, (k + n), l) |
| 4. For j = 1, 2, ... , b - 1 do                                      |
|        i = ceil(j * n / N),                                          |
|        C_j = E_{K^i}(M_j (xor) C_{j-1})                              |
| 5. SK = Generate_Subkey(K^l_1, |M_b|)                                |
| 6. If |M_b| = n then M*_b = M_b                                      |
|                 else M*_b = M_b | 1 | 0^{n - 1 -|M_b|}               |
| 7. T = E_{K^l}(M*_b (xor) C_{b-1} (xor) SK)                          |
| 8. Return T                                                          |
+----------------------------------------------------------------------+

7.  Joint Usage of External and Internal Re-keying

   Both external re-keying and internal re-keying have their own
   advantages and disadvantages discussed in Section 1.  For instance,
   using external re-keying can essentially limit the message length,
   while in the case of internal re-keying the section size, which can
   be chosen as the maximal possible for operational properties, limits
   the amount of separate messages.  There is no more preferable
   technique because the choice of technique can depend on protocol
   features.  However, some protocols may have features that require to
   take advantages provided by both external and internal re-keying
   mechanisms: for example, the protocol mainly transmits messages of
   small length, but it must additionally support very long messages
   processing.  In such situations it is necessary to use external and
   internal re-keying jointly, since these techniques negate each
   other's disadvantages.



Smyshlyaev              Expires September 1, 2018              [Page 40]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   For composition of external and internal re-keying techniques any
   mechanism described in Section 5 can be used with any mechanism
   described in Section 6.

   For example, consider the GCM-ACPKM mode with external serial re-
   keying based on a KDF on a Hash function.  Denote by a frame size the
   number of messages in each frame (in the case of implicit approach to
   the key lifetime control) for external re-keying.

   Let L be a key lifetime limitation.  The section size N for internal
   re-keying and the frame size q for external re-keying must be chosen
   in such a way that q * N must not exceed L.

   Suppose that t messages (ICN_i, P_i, A_i), with initial counter nonce
   ICN_i, plaintext P_i and additional authenticated data A_i, will be
   processed before renegotiation.

   For authenticated encryption of each message (ICN_i, P_i, A_i), i =
   1, ..., t, the following algorithm can be applied:


   1. j = ceil(i / q),
   2. K^j = ExtSerialH(K, j),
   3. C_i | T_i = GCM-ACPKM-Encrypt(N, K^j, ICN_i, P_i, A_i).


   Note that nonces ICN_i, that are used under the same frame key, must
   be unique for each message.

8.  Security Considerations

   Re-keying should be used to increase "a priori" security properties
   of ciphers in hostile environments (e.g., with side-channel
   adversaries).  If some efficient attacks are known for a cipher, it
   must not be used.  So re-keying cannot be used as a patch for
   vulnerable ciphers.  Base cipher properties must be well analyzed,
   because the security of re-keying mechanisms is based on the security
   of a block cipher as a pseudorandom function.

   Re-keying is not intended to solve any post-quantum security issues
   for symmetric cryptography, since the reduction of security caused by
   Grover's algorithm is not connected with a size of plaintext
   transformed by a cipher - only a negligible (sufficient for key
   uniqueness) material is needed; and the aim of re-keying is to limit
   a size of plaintext transformed under one initial key.

   Re-keying can provide backward security only if previous key material
   is securely deleted after usage by all parties.



Smyshlyaev              Expires September 1, 2018              [Page 41]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


9.  References

9.1.  Normative References

   [CMS]      Housley, R., "Cryptographic Message Syntax (CMS)", STD 70,
              RFC 5652, DOI 10.17487/RFC5652, September 2009,
              <http://www.rfc-editor.org/info/rfc5652>.

   [DTLS]     Rescorla, E. and N. Modadugu, "Datagram Transport Layer
              Security Version 1.2", RFC 6347, DOI 10.17487/RFC6347,
              January 2012, <http://www.rfc-editor.org/info/rfc6347>.

   [ESP]      Kent, S., "IP Encapsulating Security Payload (ESP)",
              RFC 4303, DOI 10.17487/RFC4303, December 2005,
              <http://www.rfc-editor.org/info/rfc4303>.

   [GCM]      Dworkin, M., "Recommendation for Block Cipher Modes of
              Operation: Galois/Counter Mode (GCM) and GMAC", NIST
              Special Publication 800-38D
              http://nvlpubs.nist.gov/nistpubs/Legacy/SP/
              nistspecialpublication800-38d.pdf, November 2007.

   [MODES]    Dworkin, M., "Recommendation for Block Cipher Modes of
              Operation: Methods and Techniques", NIST Special
              Publication  800-38A, December 2001.

   [NISTSP800-108]
              National Institute of Standards and Technology,
              "Recommendation for Key Derivation Using Pseudorandom
              Functions", NIST Special Publication 800-108, November
              2008, <http://nvlpubs.nist.gov/nistpubs/Legacy/SP/
              nistspecialpublication800-108.pdf>.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC4493]  Song, JH., Poovendran, R., Lee, J., and T. Iwata, "The
              AES-CMAC Algorithm", RFC 4493, DOI 10.17487/RFC4493, June
              2006, <https://www.rfc-editor.org/info/rfc4493>.

   [RFC5869]  Krawczyk, H. and P. Eronen, "HMAC-based Extract-and-Expand
              Key Derivation Function (HKDF)", RFC 5869,
              DOI 10.17487/RFC5869, May 2010,
              <https://www.rfc-editor.org/info/rfc5869>.





Smyshlyaev              Expires September 1, 2018              [Page 42]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   [RFC7836]  Smyshlyaev, S., Ed., Alekseev, E., Oshkin, I., Popov, V.,
              Leontiev, S., Podobaev, V., and D. Belyavsky, "Guidelines
              on the Cryptographic Algorithms to Accompany the Usage of
              Standards GOST R 34.10-2012 and GOST R 34.11-2012",
              RFC 7836, DOI 10.17487/RFC7836, March 2016,
              <https://www.rfc-editor.org/info/rfc7836>.

   [SSH]      Ylonen, T. and C. Lonvick, Ed., "The Secure Shell (SSH)
              Transport Layer Protocol", RFC 4253, DOI 10.17487/RFC4253,
              January 2006, <http://www.rfc-editor.org/info/rfc4253>.

   [TLS]      Dierks, T. and E. Rescorla, "The Transport Layer Security
              (TLS) Protocol Version 1.2", RFC 5246,
              DOI 10.17487/RFC5246, August 2008,
              <http://www.rfc-editor.org/info/rfc5246>.

   [TLSDraft]
              Rescorla, E., "The Transport Layer Security (TLS) Protocol
              Version 1.3", 2017,
              <https://tools.ietf.org/html/draft-ietf-tls-tls13-22>.

9.2.  Informative References

   [AAOS2017]
              Ahmetzyanova, L., Alekseev, E., Oshkin, I., and S.
              Smyshlyaev, "Increasing the Lifetime of Symmetric Keys for
              the GCM Mode by Internal Re-keying", Cryptology ePrint
              Archive Report 2017/697, 2017,
              <https://eprint.iacr.org/2017/697.pdf>.

   [AbBell]   Michel Abdalla and Mihir Bellare, "Increasing the Lifetime
              of a Key: A Comparative Analysis of the Security of Re-
              keying Techniques", ASIACRYPT2000, LNCS 1976, pp. 546-559,
              2000.

   [AESDUKPT]
              ANSI, "Retail Financial Services Symmetric Key Management
              - Part 3: Derived Unique Key Per Transaction", ANSI
               X9.24-3-2017, 2017.

   [FKK2005]  Fu, K., Kamara, S., and T. Kohno, "Key Regression:
              Enabling Efficient Key Distribution for Secure Distributed
              Storage", November 2005,
              <https://homes.cs.washington.edu/~yoshi/papers/KR/
              NDSS06.pdf>.






Smyshlyaev              Expires September 1, 2018              [Page 43]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   [FPS2012]  Faust, S., Pietrzak, K., and j. Schipper, "Practical
              Leakage-Resilient Symmetric Cryptography", CHES2012 LNCS,
              vol. 7428, pp. 213-232,, 2012,
              <https://link.springer.com/content/
              pdf/10.1007%2F978-3-642-33027-8_13.pdf>.

   [FRESHREKEYING]
              Dziembowski, S., Faust, S., Herold, G., Journault, A.,
              Masny, D., and F. Standaert, "Towards Sound Fresh Re-
              Keying with Hard (Physical) Learning Problems", Cryptology
              ePrint Archive Report 2016/573, June 2016,
              <https://eprint.iacr.org/2016/573>.

   [GGM]      Goldreich, O., Goldwasser, S., and S. Micali, "How to
              Construct Random Functions", Journal of the Association
              for Computing Machinery Vol.33, No.4, pp. 792-807, October
              1986, <http://www.wisdom.weizmann.ac.il/~/oded/X/ggm.pdf>.

   [KMNT2003]
              Kim, Y., Maino, F., Narasimha, M., and G. Tsudik, "Secure
              Group Services for Storage Area Networks",
              IEEE Communication Magazine 41, pp. 92-99, 2003,
              <http://www.ics.uci.edu/~gts/paps/kmnt02.pdf>.

   [LDC]      Howard M. Heys, "A Tutorial on Linear and Differential
              Cryptanalysis", 2017,
              <http://www.cs.bc.edu/~straubin/crypto2017/heys.pdf>.

   [OWT]      Joye, M. and S. Yen, "One-Way Cross-Trees and Their
              Applications", DOI 10.1007/3-540-45664-3_25, February
              2002, <https://link.springer.com/content/
              pdf/10.1007%2F3-540-45664-3_25.pdf>.

   [P3]       Peter Alexander, "Dynamic Key Changes on Encrypted
              Sessions", CFRG mail archive , December 2017,
              <https://www.ietf.org/mail-archive/web/cfrg/current/
              msg09401.html>.

   [Pietrzak2009]
              Pietrzak, K., "A Leakage-Resilient Mode of Operation",
              EUROCRYPT2009 LNCS, vol. 5479, pp. 462-482,, 2009,
              <https://iacr.org/archive/
              eurocrypt2009/54790461/54790461.pdf>.

   [SIGNAL]   Perrin, T., Ed. and M. Marlinspike, "The Double Ratchet
              Algorithm", November 2016,
              <https://signal.org/docs/specifications/doubleratchet/
              doubleratchet.pdf>.



Smyshlyaev              Expires September 1, 2018              [Page 44]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   [Sweet32]  Karthikeyan Bhargavan, Gaetan Leurent, "On the Practical
              (In-)Security of 64-bit Block Ciphers: Collision Attacks
              on HTTP over TLS and OpenVPN", Cryptology ePrint
              Archive Report 2016/798, 2016,
              <https://sweet32.info/SWEET32_CCS16.pdf>.

   [TAHA]     Taha, M. and P. Schaumont, "Key Updating for Leakage
              Resiliency With Application to AES Modes of Operation",
              DOI 10.1109/TIFS.2014.2383359, December 2014,
              <http://ieeexplore.ieee.org/document/6987331/>.

   [TEMPEST]  By Craig Ramsay, Jasper Lohuis, "TEMPEST attacks against
              AES. Covertly stealing keys for 200 euro", 2017,
              <https://www.fox-it.com/en/wp-content/uploads/sites/11/
              Tempest_attacks_against_AES.pdf>.

   [U2F]      Chang, D., Mishra, S., Sanadhya, S., and A. Singhl, "On
              Making U2F Protocol Leakage-Resilient via Re-keying.",
              Cryptology ePrint Archive Report 2017/721, August 2017,
              <https://eprint.iacr.org/2017/721.pdf>.

Appendix A.  Test Examples

A.1.  Test Examples for External Re-keying

A.1.1.  External Re-keying with a Parallel Construction

























Smyshlyaev              Expires September 1, 2018              [Page 45]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   External re-keying with a parallel construction based on AES-256
   ****************************************************************
   k = 256
   t = 128

   Initial key:
   00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
   0F 0E 0D 0C 0B 0A 09 08 07 06 05 04 03 02 01 00

   K^1:
   51 16 8A B6 C8 A8 38 65 54 85 31 A5 D2 BA C3 86
   64 7D 5C D5 1C 3D 62 98 BC 09 B1 D8 64 EC D9 B1

   K^2:
   6F ED F5 D3 77 57 48 75 35 2B 5F 4D B6 5B E0 15
   B8 02 92 32 D8 D3 8D 73 FE DC DD C6 C8 36 78 BD

   K^3:
   B6 40 24 85 A4 24 BD 35 B4 26 43 13 76 26 70 B6
   5B F3 30 3D 3B 20 EB 14 D1 3B B7 91 74 E3 DB EC

   ...

   K^126:
   2F 3F 15 1B 53 88 23 CD 7D 03 FC 3D FD B3 57 5E
   23 E4 1C 4E 46 FF 6B 33 34 12 27 84 EF 5D 82 23

   K^127:
   8E 51 31 FB 0B 64 BB D0 BC D4 C5 7B 1C 66 EF FD
   97 43 75 10 6C AF 5D 5E 41 E0 17 F4 05 63 05 ED

   K^128:
   77 4F BF B3 22 60 C5 3B A3 8E FE B1 96 46 76 41
   94 49 AF 84 2D 84 65 A7 F4 F7 2C DC A4 9D 84 F9

















Smyshlyaev              Expires September 1, 2018              [Page 46]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   External re-keying with a parallel construction based on SHA-256
   ****************************************************************
   k = 256
   t = 128

   label:
   SHA2label

   Initial key:
   00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
   0F 0E 0D 0C 0B 0A 09 08 07 06 05 04 03 02 01 00

   K^1:
   C1 A1 4C A0 30 29 BE 43 9F 35 3C 79 1A 51 48 57
   26 7A CD 5A E8 7D E7 D1 B2 E2 C7 AF A4 29 BD 35

   K^2:
   03 68 BB 74 41 2A 98 ED C4 7B 94 CC DF 9C F4 9E
   A9 B8 A9 5F 0E DC 3C 1E 3B D2 59 4D D1 75 82 D4

   K^3:
   2F D3 68 D3 A7 8F 91 E6 3B 68 DC 2B 41 1D AC 80
   0A C3 14 1D 80 26 3E 61 C9 0D 24 45 2A BD B1 AE

   ...

   K^126:
   55 AC 2B 25 00 78 3E D4 34 2B 65 0E 75 E5 8B 76
   C8 04 E9 D3 B6 08 7D C0 70 2A 99 A4 B5 85 F1 A1

   K^127:
   77 4D 15 88 B0 40 90 E5 8C 6A D7 5D 0F CF 0A 4A
   6C 23 F1 B3 91 B1 EF DF E5 77 64 CD 09 F5 BC AF

   K^128:
   E5 81 FF FB 0C 90 88 CD E5 F4 A5 57 B6 AB D2 2E
   94 C3 42 06 41 AB C1 72 66 CC 2F 59 74 9C 86 B3



A.1.2.  External Re-keying with a Serial Construction


   External re-keying with a serial construction based on AES-256
   **************************************************************
   AES 256 examples:
   k = 256
   t = 128



Smyshlyaev              Expires September 1, 2018              [Page 47]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   Initial key:
   00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
   0F 0E 0D 0C 0B 0A 09 08 07 06 05 04 03 02 01 00

   K*_1:
   00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
   0F 0E 0D 0C 0B 0A 09 08 07 06 05 04 03 02 01 00

   K^1:
   66 B8 BD E5 90 6C EC DF FA 8A B2 FD 92 84 EB F0
   51 16 8A B6 C8 A8 38 65 54 85 31 A5 D2 BA C3 86

   K*_2:
   64 7D 5C D5 1C 3D 62 98 BC 09 B1 D8 64 EC D9 B1
   6F ED F5 D3 77 57 48 75 35 2B 5F 4D B6 5B E0 15

   K^2:
   66 B8 BD E5 90 6C EC DF FA 8A B2 FD 92 84 EB F0
   51 16 8A B6 C8 A8 38 65 54 85 31 A5 D2 BA C3 86

   K*_3:
   64 7D 5C D5 1C 3D 62 98 BC 09 B1 D8 64 EC D9 B1
   6F ED F5 D3 77 57 48 75 35 2B 5F 4D B6 5B E0 15

   K^3:
   66 B8 BD E5 90 6C EC DF FA 8A B2 FD 92 84 EB F0
   51 16 8A B6 C8 A8 38 65 54 85 31 A5 D2 BA C3 86

   ...

   K*_126:
   64 7D 5C D5 1C 3D 62 98 BC 09 B1 D8 64 EC D9 B1
   6F ED F5 D3 77 57 48 75 35 2B 5F 4D B6 5B E0 15

   K^126:
   66 B8 BD E5 90 6C EC DF FA 8A B2 FD 92 84 EB F0
   51 16 8A B6 C8 A8 38 65 54 85 31 A5 D2 BA C3 86

   K*_127:
   64 7D 5C D5 1C 3D 62 98 BC 09 B1 D8 64 EC D9 B1
   6F ED F5 D3 77 57 48 75 35 2B 5F 4D B6 5B E0 15

   K^127:
   66 B8 BD E5 90 6C EC DF FA 8A B2 FD 92 84 EB F0
   51 16 8A B6 C8 A8 38 65 54 85 31 A5 D2 BA C3 86

   K*_128:
   64 7D 5C D5 1C 3D 62 98 BC 09 B1 D8 64 EC D9 B1



Smyshlyaev              Expires September 1, 2018              [Page 48]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   6F ED F5 D3 77 57 48 75 35 2B 5F 4D B6 5B E0 15

   K^128:
   66 B8 BD E5 90 6C EC DF FA 8A B2 FD 92 84 EB F0
   51 16 8A B6 C8 A8 38 65 54 85 31 A5 D2 BA C3 86




   External re-keying with a serial construction based on SHA-256
   **************************************************************
   k = 256
   t = 128

   Initial key:
   00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
   0F 0E 0D 0C 0B 0A 09 08 07 06 05 04 03 02 01 00

   label1:
   SHA2label1

   label2:
   SHA2label2

   K*_1:
   00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
   0F 0E 0D 0C 0B 0A 09 08 07 06 05 04 03 02 01 00

   K^1:
   2D A8 D1 37 6C FD 52 7F F7 36 A4 E2 81 C6 0A 9B
   F3 8E 66 97 ED 70 4F B5 FB 10 33 CC EC EE D5 EC

   K*_2:
   14 65 5A D1 7C 19 86 24 9B D3 56 DF CC BE 73 6F
   52 62 4A 9D E3 CC 40 6D A9 48 DA 5C D0 68 8A 04

   K^2:
   2F EA 8D 57 2B EF B8 89 42 54 1B 8C 1B 3F 8D B1
   84 F9 56 C7 FE 01 11 99 1D FB 98 15 FE 65 85 CF

   K*_3:
   18 F0 B5 2A D2 45 E1 93 69 53 40 55 43 70 95 8D
   70 F0 20 8C DF B0 5D 67 CD 1B BF 96 37 D3 E3 EB

   K^3:
   53 C7 4E 79 AE BC D1 C8 24 04 BF F6 D7 B1 AC BF
   F9 C0 0E FB A8 B9 48 29 87 37 E1 BA E7 8F F7 92




Smyshlyaev              Expires September 1, 2018              [Page 49]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   ...

   K*_126:
   A3 6D BF 02 AA 0B 42 4A F2 C0 46 52 68 8B C7 E6
   5E F1 62 C3 B3 2F DD EF E4 92 79 5D BB 45 0B CA

   K^126:
   6C 4B D6 22 DC 40 48 0F 29 C3 90 B8 E5 D7 A7 34
   23 4D 34 65 2C CE 4A 76 2C FE 2A 42 C8 5B FE 9A

   K*_127:
   84 5F 49 3D B8 13 1D 39 36 2B BE D3 74 8F 80 A1
   05 A7 07 37 BA 15 72 E0 73 49 C2 67 5D 0A 28 A1

   K^127:
   57 F0 BD 5A B8 2A F3 6B 87 33 CF F7 22 62 B4 D0
   F0 EE EF E1 50 74 E5 BA 13 C1 23 68 87 36 29 A2

   K*_128:
   52 F2 0F 56 5C 9C 56 84 AF 69 AD 45 EE B8 DA 4E
   7A A6 04 86 35 16 BA 98 E4 CB 46 D2 E8 9A C1 09

   K^128:
   9B DD 24 7D F3 25 4A 75 E0 22 68 25 68 DA 9D D5
   C1 6D 2D 2B 4F 3F 1F 2B 5E 99 82 7F 15 A1 4F A4



A.2.  Test Examples for Internal Re-keying

A.2.1.  Internal Re-keying Mechanisms that Do Not Require Master Key


   CTR-ACPKM mode with AES-256
   ***************************
   k = 256
   n = 128
   c = 64
   N = 256

   Initial key K:
   00000:   88 99 AA BB CC DD EE FF 00 11 22 33 44 55 66 77
   00010:   FE DC BA 98 76 54 32 10 01 23 45 67 89 AB CD EF

   Plain text P:
   00000:   11 22 33 44 55 66 77 00 FF EE DD CC BB AA 99 88
   00010:   00 11 22 33 44 55 66 77 88 99 AA BB CC EE FF 0A
   00020:   11 22 33 44 55 66 77 88 99 AA BB CC EE FF 0A 00



Smyshlyaev              Expires September 1, 2018              [Page 50]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   00030:   22 33 44 55 66 77 88 99 AA BB CC EE FF 0A 00 11
   00040:   33 44 55 66 77 88 99 AA BB CC EE FF 0A 00 11 22
   00050:   44 55 66 77 88 99 AA BB CC EE FF 0A 00 11 22 33
   00060:   55 66 77 88 99 AA BB CC EE FF 0A 00 11 22 33 44

   ICN:
   12 34 56 78 90 AB CE F0 A1 B2 C3 D4 E5 F0 01 12
   23 34 45 56 67 78 89 90 12 13 14 15 16 17 18 19

   D_1:
   00000:   80 81 82 83 84 85 86 87 88 89 8A 8B 8C 8D 8E 8F

   D_2:
   00000:   90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9E 9F

   Section_1

   Section key K^1:
   00000:   88 99 AA BB CC DD EE FF 00 11 22 33 44 55 66 77
   00010:   FE DC BA 98 76 54 32 10 01 23 45 67 89 AB CD EF

   Input block CTR_1:
   00000:   12 34 56 78 90 AB CE F0 00 00 00 00 00 00 00 00

   Output block G_1:
   00000:   FD 7E F8 9A D9 7E A4 B8 8D B8 B5 1C 1C 9D 6D D0

   Input block CTR_2:
   00000:   12 34 56 78 90 AB CE F0 00 00 00 00 00 00 00 01

   Output block G_2:
   00000:   19 98 C5 71 76 37 FB 17 11 E4 48 F0 0C 0D 60 B2

   Section_2

   Section key K^2:
   00000:   F6 80 D1 21 2F A4 3D F4 EC 3A 91 DE 2A B1 6F 1B
   00010:   36 B0 48 8A 4F C1 2E 09 98 D2 E4 A8 88 E8 4F 3D

   Input block CTR_3:
   00000:   12 34 56 78 90 AB CE F0 00 00 00 00 00 00 00 02

   Output block G_3:
   00000:   E4 88 89 4F B6 02 87 DB 77 5A 07 D9 2C 89 46 EA

   Input block CTR_4:
   00000:   12 34 56 78 90 AB CE F0 00 00 00 00 00 00 00 03




Smyshlyaev              Expires September 1, 2018              [Page 51]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   Output block G_4:
   00000:   BC 4F 87 23 DB F0 91 50 DD B4 06 C3 1D A9 7C A4

   Section_3

   Section key K^3:
   00000:   8E B9 7E 43 27 1A 42 F1 CA 8E E2 5F 5C C7 C8 3B
   00010:   1A CE 9E 5E D0 6A A5 3B 57 B9 6A CF 36 5D 24 B8

   Input block CTR_5:
   00000:   12 34 56 78 90 AB CE F0 00 00 00 00 00 00 00 04

   Output block G_5:
   00000:   68 6F 22 7D 8F B2 9C BD 05 C8 C3 7D 22 FE 3B B7

   Input block CTR_6:
   00000:   12 34 56 78 90 AB CE F0 00 00 00 00 00 00 00 05

   Output block G_6:
   00000:   C0 1B F9 7F 75 6E 12 2F 80 59 55 BD DE 2D 45 87

   Section_4

   Section key K^4:
   00000:   C5 71 6C C9 67 98 BC 2D 4A 17 87 B7 8A DF 94 AC
   00010:   E8 16 F8 0B DB BC AD 7D 60 78 12 9C 0C B4 02 F5

   Block number 7:

   Input block CTR_7:
   00000:   12 34 56 78 90 AB CE F0 00 00 00 00 00 00 00 06

   Output block G_7:
   00000:   03 DE 34 74 AB 9B 65 8A 3B 54 1E F8 BD 2B F4 7D


   The result G = G_1 | G_2 | G_3 | G_4 | G_5 | G_6 | G_7:
   00000:   FD 7E F8 9A D9 7E A4 B8 8D B8 B5 1C 1C 9D 6D D0
   00010:   19 98 C5 71 76 37 FB 17 11 E4 48 F0 0C 0D 60 B2
   00020:   E4 88 89 4F B6 02 87 DB 77 5A 07 D9 2C 89 46 EA
   00030:   BC 4F 87 23 DB F0 91 50 DD B4 06 C3 1D A9 7C A4
   00040:   68 6F 22 7D 8F B2 9C BD 05 C8 C3 7D 22 FE 3B B7
   00050:   C0 1B F9 7F 75 6E 12 2F 80 59 55 BD DE 2D 45 87
   00060:   03 DE 34 74 AB 9B 65 8A 3B 54 1E F8 BD 2B F4 7D

   The result ciphertext C = P (xor) MSB_{|P|}(G):
   00000:   EC 5C CB DE 8C 18 D3 B8 72 56 68 D0 A7 37 F4 58
   00010:   19 89 E7 42 32 62 9D 60 99 7D E2 4B C0 E3 9F B8



Smyshlyaev              Expires September 1, 2018              [Page 52]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   00020:   F5 AA BA 0B E3 64 F0 53 EE F0 BC 15 C2 76 4C EA
   00030:   9E 7C C3 76 BD 87 19 C9 77 0F CA 2D E2 A3 7C B5
   00040:   5B 2B 77 1B F8 3A 05 17 BE 04 2D 82 28 FE 2A 95
   00050:   84 4E 9F 08 FD F7 B8 94 4C B7 AA B7 DE 3C 67 B4
   00060:   56 B8 43 FC 32 31 DE 46 D5 AB 14 F8 AC 09 C7 39



   GCM-ACPKM mode with AES-128
   ***************************
   k = 128
   n = 128
   c = 32
   N = 256

   Initilal Key K:
   00000:   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

   Additional data A:
   00000:   11 22 33

   Plaintext:
   00000:   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   00010:   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   00020:   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

   ICN:
   00000:   00 00 00 00 00 00 00 00 00 00 00 00

   Number of sections: 2

   Section key K^1:
   00000:   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

   Section key K^2:
   00000:   15 1A 9F B0 B6 AC C5 97 6A FB 50 31 D1 DE C8 41

   Encrypted GCTR_1 | GCTR_2 | GCTR_3:
   00000:   03 88 DA CE 60 B6 A3 92 F3 28 C2 B9 71 B2 FE 78
   00010:   F7 95 AA AB 49 4B 59 23 F7 FD 89 FF 94 8B C1 E0
   00020:   D6 B3 12 46 E9 CE 9F F1 3A B3 42 7E E8 91 96 AD

   Ciphertext C:
   00000:   03 88 DA CE 60 B6 A3 92 F3 28 C2 B9 71 B2 FE 78
   00010:   F7 95 AA AB 49 4B 59 23 F7 FD 89 FF 94 8B C1 E0
   00020:   D6 B3 12 46 E9 CE 9F F1 3A B3 42 7E E8 91 96 AD

   GHASH input:



Smyshlyaev              Expires September 1, 2018              [Page 53]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   00000:   11 22 33 00 00 00 00 00 00 00 00 00 00 00 00 00
   00010:   03 88 DA CE 60 B6 A3 92 F3 28 C2 B9 71 B2 FE 78
   00020:   F7 95 AA AB 49 4B 59 23 F7 FD 89 FF 94 8B C1 E0
   00030:   D6 B3 12 46 E9 CE 9F F1 3A B3 42 7E E8 91 96 AD
   00040:   00 00 00 00 00 00 00 18 00 00 00 00 00 00 01 80

   GHASH output S:
   00000:   E8 ED E9 94 9A DD 55 30 B0 F4 4E F5 00 FC 3E 3C

   Authentication tag  T:
   00000:   B0 0F 15 5A 60 A3 65 51 86 8B 53 A2 A4 1B 7B 66

   The result C | T:
   00000:   03 88 DA CE 60 B6 A3 92 F3 28 C2 B9 71 B2 FE 78
   00010:   F7 95 AA AB 49 4B 59 23 F7 FD 89 FF 94 8B C1 E0
   00020:   D6 B3 12 46 E9 CE 9F F1 3A B3 42 7E E8 91 96 AD
   00030:   B0 0F 15 5A 60 A3 65 51 86 8B 53 A2 A4 1B 7B 66



A.2.2.  Internal Re-keying Mechanisms with a Master Key


   CTR-ACPKM-Master mode with AES-256
   **********************************
   k = 256
   n = 128
   c for CTR-ACPKM mode = 64
   c for CTR-ACPKM-Master mode = 64
   N = 256
   T* = 512

   Initial key K:
   00000:   88 99 AA BB CC DD EE FF 00 11 22 33 44 55 66 77
   00010:   FE DC BA 98 76 54 32 10 01 23 45 67 89 AB CD EF

   Initial vector ICN:
   00000:   12 34 56 78 90 AB CE F0 A1 B2 C3 D4 E5 F0 01 12

   Plaintext P:
   00000:   11 22 33 44 55 66 77 00 FF EE DD CC BB AA 99 88
   00010:   00 11 22 33 44 55 66 77 88 99 AA BB CC EE FF 0A
   00020:   11 22 33 44 55 66 77 88 99 AA BB CC EE FF 0A 00
   00030:   22 33 44 55 66 77 88 99 AA BB CC EE FF 0A 00 11
   00040:   33 44 55 66 77 88 99 AA BB CC EE FF 0A 00 11 22
   00050:   44 55 66 77 88 99 AA BB CC EE FF 0A 00 11 22 33
   00060:   55 66 77 88 99 AA BB CC EE FF 0A 00 11 22 33 44




Smyshlyaev              Expires September 1, 2018              [Page 54]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   K^1 | K^2 | K^3 | K^4:
   00000:   9F 10 BB F1 3A 79 FB BD 4A 4C A8 64 C4 90 74 64
   00010:   39 FE 50 6D 4B 86 9B 21 03 A3 B6 A4 79 28 3C 60
   00020:   77 91 17 50 E0 D1 77 E5 9A 13 78 2B F1 89 08 D0
   00030:   AB 6B 59 EE 92 49 05 B3 AB C7 A4 E3 69 65 76 C3
   00040:   E8 76 2B 30 8B 08 EB CE 3E 93 9A C2 C0 3E 76 D4
   00050:   60 9A AB D9 15 33 13 D3 CF D3 94 E7 75 DF 3A 94
   00060:   F2 EE 91 45 6B DC 3D E4 91 2C 87 C3 29 CF 31 A9
   00070:   2F 20 2E 5A C4 9A 2A 65 31 33 D6 74 8C 4F F9 12

   Section_1

   K^1:
   00000:   9F 10 BB F1 3A 79 FB BD 4A 4C A8 64 C4 90 74 64
   00010:   39 FE 50 6D 4B 86 9B 21 03 A3 B6 A4 79 28 3C 60

   Input block CTR_1:
   00000:   12 34 56 78 90 AB CE F0 00 00 00 00 00 00 00 00

   Output block G_1:
   00000:   8C A2 B6 82 A7 50 65 3F 8E BF 08 E7 9F 99 4D 5C

   Input block CTR_2:
   00000:   12 34 56 78 90 AB CE F0 00 00 00 00 00 00 00 01

   Output block G_2:
   00000:   F6 A6 A5 BA 58 14 1E ED 23 DC 31 68 D2 35 89 A1


   Section_2

   K^2:
   00000:   77 91 17 50 E0 D1 77 E5 9A 13 78 2B F1 89 08 D0
   00010:   AB 6B 59 EE 92 49 05 B3 AB C7 A4 E3 69 65 76 C3

   Input block CTR_3:
   00000:   12 34 56 78 90 AB CE F0 00 00 00 00 00 00 00 02

   Output block G_3:
   00000:   4A 07 5F 86 05 87 72 94 1D 8E 7D F8 32 F4 23 71

   Input block CTR_4:
   00000:   12 34 56 78 90 AB CE F0 00 00 00 00 00 00 00 03

   Output block G_4:
   00000:   23 35 66 AF 61 DD FE A7 B1 68 3F BA B0 52 4A D7





Smyshlyaev              Expires September 1, 2018              [Page 55]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   Section_3

   K^3:
   00000:   E8 76 2B 30 8B 08 EB CE 3E 93 9A C2 C0 3E 76 D4
   00010:   60 9A AB D9 15 33 13 D3 CF D3 94 E7 75 DF 3A 94

   Input block CTR_5:
   00000:   12 34 56 78 90 AB CE F0 00 00 00 00 00 00 00 04

   Output block G_5:
   00000:   A8 09 6D BC E8 BB 52 FC DE 6E 03 70 C1 66 95 E8

   Input block CTR_6:
   00000:   12 34 56 78 90 AB CE F0 00 00 00 00 00 00 00 05

   Output block G_6:
   00000:   C6 E3 6E 8E 5B 82 AA C4 A6 6C 14 8D B1 F6 9B EF


   Section_4

   K^4:
   00000:   F2 EE 91 45 6B DC 3D E4 91 2C 87 C3 29 CF 31 A9
   00010:   2F 20 2E 5A C4 9A 2A 65 31 33 D6 74 8C 4F F9 12

   Input block CTR_7:
   00000:   12 34 56 78 90 AB CE F0 00 00 00 00 00 00 00 06

   Output block G_7:
   00000:   82 2B E9 07 96 37 44 95 75 36 3F A7 07 F8 40 22


   The result G = G_1 | G_2 | G_3 | G_4 | G_5 | G_6 | G_7:
   00000:   8C A2 B6 82 A7 50 65 3F 8E BF 08 E7 9F 99 4D 5C
   00010:   F6 A6 A5 BA 58 14 1E ED 23 DC 31 68 D2 35 89 A1
   00020:   4A 07 5F 86 05 87 72 94 1D 8E 7D F8 32 F4 23 71
   00030:   23 35 66 AF 61 DD FE A7 B1 68 3F BA B0 52 4A D7
   00040:   A8 09 6D BC E8 BB 52 FC DE 6E 03 70 C1 66 95 E8
   00050:   C6 E3 6E 8E 5B 82 AA C4 A6 6C 14 8D B1 F6 9B EF
   00060:   82 2B E9 07 96 37 44 95 75 36 3F A7 07 F8 40 22

   The result ciphertext C = P (xor) MSB_{|P|}(G):
   00000:   9D 80 85 C6 F2 36 12 3F 71 51 D5 2B 24 33 D4 D4
   00010:   F6 B7 87 89 1C 41 78 9A AB 45 9B D3 1E DB 76 AB
   00020:   5B 25 6C C2 50 E1 05 1C 84 24 C6 34 DC 0B 29 71
   00030:   01 06 22 FA 07 AA 76 3E 1B D3 F3 54 4F 58 4A C6
   00040:   9B 4D 38 DA 9F 33 CB 56 65 A2 ED 8F CB 66 84 CA
   00050:   82 B6 08 F9 D3 1B 00 7F 6A 82 EB 87 B1 E7 B9 DC



Smyshlyaev              Expires September 1, 2018              [Page 56]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   00060:   D7 4D 9E 8F 0F 9D FF 59 9B C9 35 A7 16 DA 73 66




   GCM-ACPKM-Master mode with AES-256
   **********************************
   k = 192
   n = 128
   c for the CTR-ACPKM mode = 64
   c for the GCM-ACPKM-Master mode = 32
   T* = 384
   N = 256

   Initila Key K:
   00000:   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   00010:   00 00 00 00 00 00 00 00

   Additional data A:
   00000:   11 22 33

   Plaintext:
   00000:   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   00010:   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   00020:   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   00030:   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   00040:   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

   ICN:
   00000:   00 00 00 00 00 00 00 00 00 00 00 00

   Number of sections: 3

   K^1 | K^2 | K^3:
   00000:   93 BA AF FB 35 FB E7 39 C1 7C 6A C2 2E EC F1 8F
   00010:   7B 89 F0 BF 8B 18 07 05 96 48 68 9F 36 A7 65 CC
   00020:   CD 5D AC E2 0D 47 D9 18 D7 86 D0 41 A8 3B AB 99
   00030:   F5 F8 B1 06 D2 71 78 B1 B0 08 C9 99 0B 72 E2 87
   00040:   5A 2D 3C BE F1 6E 67 3C

   Encrypted GCTR_1 | ... | GCTR_5
   00000:   43 FA 71 81 64 B1 E3 D7 1E 7B 65 39 A7 02 1D 52
   00010:   69 9B 9E 1B 43 24 B7 52 95 74 E7 90 F2 BE 60 E8
   00020:   11 62 C9 90 2A 2B 77 7F D9 6A D6 1A 99 E0 C6 DE
   00030:   4B 91 D4 29 E3 1A 8C 11 AF F0 BC 47 F6 80 AF 14
   00040:   40 1C C1 18 14 63 8E 76 24 83 37 75 16 34 70 08

   Ciphertext C:



Smyshlyaev              Expires September 1, 2018              [Page 57]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   00000:   43 FA 71 81 64 B1 E3 D7 1E 7B 65 39 A7 02 1D 52
   00010:   69 9B 9E 1B 43 24 B7 52 95 74 E7 90 F2 BE 60 E8
   00020:   11 62 C9 90 2A 2B 77 7F D9 6A D6 1A 99 E0 C6 DE
   00030:   4B 91 D4 29 E3 1A 8C 11 AF F0 BC 47 F6 80 AF 14
   00040:   40 1C C1 18 14 63 8E 76 24 83 37 75 16 34 70 08

   GHASH input:
   00000:   11 22 33 00 00 00 00 00 00 00 00 00 00 00 00 00
   00010:   43 FA 71 81 64 B1 E3 D7 1E 7B 65 39 A7 02 1D 52
   00020:   69 9B 9E 1B 43 24 B7 52 95 74 E7 90 F2 BE 60 E8
   00030:   11 62 C9 90 2A 2B 77 7F D9 6A D6 1A 99 E0 C6 DE
   00040:   4B 91 D4 29 E3 1A 8C 11 AF F0 BC 47 F6 80 AF 14
   00050:   40 1C C1 18 14 63 8E 76 24 83 37 75 16 34 70 08
   00060:   00 00 00 00 00 00 00 18 00 00 00 00 00 00 02 80

   GHASH output S:
   00000:   6E A3 4B D5 6A C5 40 B7 3E 55 D5 86 D1 CC 09 7D

   Authentication tag  T:
   00050:   CC 3A BA 11 8C E7 85 FD 77 78 94 D4 B5 20 69 F8

   The result C | T:
   00000:   43 FA 71 81 64 B1 E3 D7 1E 7B 65 39 A7 02 1D 52
   00010:   69 9B 9E 1B 43 24 B7 52 95 74 E7 90 F2 BE 60 E8
   00020:   11 62 C9 90 2A 2B 77 7F D9 6A D6 1A 99 E0 C6 DE
   00030:   4B 91 D4 29 E3 1A 8C 11 AF F0 BC 47 F6 80 AF 14
   00040:   40 1C C1 18 14 63 8E 76 24 83 37 75 16 34 70 08
   00050:   CC 3A BA 11 8C E7 85 FD 77 78 94 D4 B5 20 69 F8




   CBC-ACPKM-Master mode with AES-256
   **********************************
   k = 256
   n = 128
   c for the CTR-ACPKM mode = 64
   N = 256
   T* = 512

   Initial key K:
   00000:   88 99 AA BB CC DD EE FF 00 11 22 33 44 55 66 77
   00010:   FE DC BA 98 76 54 32 10 01 23 45 67 89 AB CD EF

   Initial vector IV:
   00000:   12 34 56 78 90 AB CE F0 A1 B2 C3 D4 E5 F0 01 12

   Plaintext P:



Smyshlyaev              Expires September 1, 2018              [Page 58]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   00000:   11 22 33 44 55 66 77 00 FF EE DD CC BB AA 99 88
   00010:   00 11 22 33 44 55 66 77 88 99 AA BB CC EE FF 0A
   00020:   11 22 33 44 55 66 77 88 99 AA BB CC EE FF 0A 00
   00030:   22 33 44 55 66 77 88 99 AA BB CC EE FF 0A 00 11
   00040:   33 44 55 66 77 88 99 AA BB CC EE FF 0A 00 11 22
   00050:   44 55 66 77 88 99 AA BB CC EE FF 0A 00 11 22 33
   00060:   55 66 77 88 99 AA BB CC EE FF 0A 00 11 22 33 44

   K^1 | K^2 | K^3 | K^4:
   00000:   9F 10 BB F1 3A 79 FB BD 4A 4C A8 64 C4 90 74 64
   00010:   39 FE 50 6D 4B 86 9B 21 03 A3 B6 A4 79 28 3C 60
   00020:   77 91 17 50 E0 D1 77 E5 9A 13 78 2B F1 89 08 D0
   00030:   AB 6B 59 EE 92 49 05 B3 AB C7 A4 E3 69 65 76 C3
   00040:   E8 76 2B 30 8B 08 EB CE 3E 93 9A C2 C0 3E 76 D4
   00050:   60 9A AB D9 15 33 13 D3 CF D3 94 E7 75 DF 3A 94
   00060:   F2 EE 91 45 6B DC 3D E4 91 2C 87 C3 29 CF 31 A9
   00070:   2F 20 2E 5A C4 9A 2A 65 31 33 D6 74 8C 4F F9 12

   Section_1

   K^1:
   00000:   9F 10 BB F1 3A 79 FB BD 4A 4C A8 64 C4 90 74 64
   00010:   39 FE 50 6D 4B 86 9B 21 03 A3 B6 A4 79 28 3C 60

   Plaintext block P_1:
   00000:   11 22 33 44 55 66 77 00 FF EE DD CC BB AA 99 88

   Input block P_1 (xor) C_0:
   00000:   03 16 65 3C C5 CD B9 F0 5E 5C 1E 18 5E 5A 98 9A

   Output block C_1:
   00000:   59 CB 5B CA C2 69 2C 60 0D 46 03 A0 C7 40 C9 7C

   Plaintext block P_2:
   00000:   00 11 22 33 44 55 66 77 88 99 AA BB CC EE FF 0A

   Input block P_2 (xor) C_1:
   00000:   59 DA 79 F9 86 3C 4A 17 85 DF A9 1B 0B AE 36 76

   Output block C_2:
   00000:   80 B6 02 74 54 8B F7 C9 78 1F A1 05 8B F6 8B 42

   Section_2

   K^2:
   00000:   77 91 17 50 E0 D1 77 E5 9A 13 78 2B F1 89 08 D0
   00010:   AB 6B 59 EE 92 49 05 B3 AB C7 A4 E3 69 65 76 C3




Smyshlyaev              Expires September 1, 2018              [Page 59]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   Plaintext block P_3:
   00000:   11 22 33 44 55 66 77 88 99 AA BB CC EE FF 0A 00

   Input block P_3 (xor) C_2:
   00000:   91 94 31 30 01 ED 80 41 E1 B5 1A C9 65 09 81 42

   Output block C_3:
   00000:   8C 24 FB CF 68 15 B1 AF 65 FE 47 75 95 B4 97 59

   Plaintext block P_4:
   00000:   22 33 44 55 66 77 88 99 AA BB CC EE FF 0A 00 11

   Input block P_4 (xor) C_3:
   00000:   AE 17 BF 9A 0E 62 39 36 CF 45 8B 9B 6A BE 97 48

   Output block C_4:
   00000:   19 65 A5 00 58 0D 50 23 72 1B E9 90 E1 83 30 E9

   Section_3

   K^3:
   00000:   E8 76 2B 30 8B 08 EB CE 3E 93 9A C2 C0 3E 76 D4
   00010:   60 9A AB D9 15 33 13 D3 CF D3 94 E7 75 DF 3A 94

   Plaintext block P_5:
   00000:   33 44 55 66 77 88 99 AA BB CC EE FF 0A 00 11 22

   Input block P_5 (xor) C_4:
   00000:   2A 21 F0 66 2F 85 C9 89 C9 D7 07 6F EB 83 21 CB

   Output block C_5:
   00000:   56 D8 34 F4 6F 0F 4D E6 20 53 A9 5C B5 F6 3C 14

   Plaintext block P_6:
   00000:   44 55 66 77 88 99 AA BB CC EE FF 0A 00 11 22 33

   Input block P_6 (xor) C_5:
   00000:   12 8D 52 83 E7 96 E7 5D EC BD 56 56 B5 E7 1E 27

   Output block C_6:
   00000:   66 68 2B 8B DD 6E B2 7E DE C7 51 D6 2F 45 A5 45

   Section_4

   K^4:
   00000:   F2 EE 91 45 6B DC 3D E4 91 2C 87 C3 29 CF 31 A9
   00010:   2F 20 2E 5A C4 9A 2A 65 31 33 D6 74 8C 4F F9 12




Smyshlyaev              Expires September 1, 2018              [Page 60]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   Plaintext block P_7:
   00000:   55 66 77 88 99 AA BB CC EE FF 0A 00 11 22 33 44

   Input block P_7 (xor) C_6:
   00000:   33 0E 5C 03 44 C4 09 B2 30 38 5B D6 3E 67 96 01

   Output block C_7:
   00000:   7F 4D 87 F9 CA E9 56 09 79 C4 FA FE 34 0B 45 34

   Cipher text C:
   00000:   59 CB 5B CA C2 69 2C 60 0D 46 03 A0 C7 40 C9 7C
   00010:   80 B6 02 74 54 8B F7 C9 78 1F A1 05 8B F6 8B 42
   00020:   8C 24 FB CF 68 15 B1 AF 65 FE 47 75 95 B4 97 59
   00030:   19 65 A5 00 58 0D 50 23 72 1B E9 90 E1 83 30 E9
   00040:   56 D8 34 F4 6F 0F 4D E6 20 53 A9 5C B5 F6 3C 14
   00050:   66 68 2B 8B DD 6E B2 7E DE C7 51 D6 2F 45 A5 45
   00060:   7F 4D 87 F9 CA E9 56 09 79 C4 FA FE 34 0B 45 34




   CFB-ACPKM-Master mode with AES-256
   **********************************
   k = 256
   n = 128
   c for the CTR-ACPKM mode = 64
   N = 256
   T* = 512

   Initial key K:
   00000:   88 99 AA BB CC DD EE FF 00 11 22 33 44 55 66 77
   00010:   FE DC BA 98 76 54 32 10 01 23 45 67 89 AB CD EF

   Initial vector IV:
   00000:   12 34 56 78 90 AB CE F0 A1 B2 C3 D4 E5 F0 01 12

   Plaintext P:
   00000:   11 22 33 44 55 66 77 00 FF EE DD CC BB AA 99 88
   00010:   00 11 22 33 44 55 66 77 88 99 AA BB CC EE FF 0A
   00020:   11 22 33 44 55 66 77 88 99 AA BB CC EE FF 0A 00
   00030:   22 33 44 55 66 77 88 99 AA BB CC EE FF 0A 00 11
   00040:   33 44 55 66 77 88 99 AA BB CC EE FF 0A 00 11 22
   00050:   44 55 66 77 88 99 AA BB CC EE FF 0A 00 11 22 33
   00060:   55 66 77 88 99 AA BB CC

   K^1 | K^2 | K^3 | K^4
   00000:   9F 10 BB F1 3A 79 FB BD 4A 4C A8 64 C4 90 74 64
   00010:   39 FE 50 6D 4B 86 9B 21 03 A3 B6 A4 79 28 3C 60



Smyshlyaev              Expires September 1, 2018              [Page 61]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   00020:   77 91 17 50 E0 D1 77 E5 9A 13 78 2B F1 89 08 D0
   00030:   AB 6B 59 EE 92 49 05 B3 AB C7 A4 E3 69 65 76 C3
   00040:   E8 76 2B 30 8B 08 EB CE 3E 93 9A C2 C0 3E 76 D4
   00050:   60 9A AB D9 15 33 13 D3 CF D3 94 E7 75 DF 3A 94
   00060:   F2 EE 91 45 6B DC 3D E4 91 2C 87 C3 29 CF 31 A9
   00070:   2F 20 2E 5A C4 9A 2A 65 31 33 D6 74 8C 4F F9 12

   Section_1

   K^1:
   00000:   9F 10 BB F1 3A 79 FB BD 4A 4C A8 64 C4 90 74 64
   00010:   39 FE 50 6D 4B 86 9B 21 03 A3 B6 A4 79 28 3C 60

   Plaintext block P_1:
   00000:   11 22 33 44 55 66 77 00 FF EE DD CC BB AA 99 88

   Encrypted block E_{K^1}(C_0):
   00000:   1C 39 9D 59 F8 5D 91 91 A9 D2 12 9F 63 15 90 03

   Output block C_1 = E_{K^1}(C_0) (xor) P_1:
   00000:   0D 1B AE 1D AD 3B E6 91 56 3C CF 53 D8 BF 09 8B

   Plaintext block P_2:
   00000:   00 11 22 33 44 55 66 77 88 99 AA BB CC EE FF 0A

   Encrypted block E_{K^1}(C_1):
   00000:   6B A2 C5 42 52 69 C6 0B 15 14 06 87 90 46 F6 2E

   Output block C_2 = E_{K^1}(C_1) (xor) P_2:
   00000:   6B B3 E7 71 16 3C A0 7C 9D 8D AC 3C 5C A8 09 24

   Section_2

   K^2:
   00000:   77 91 17 50 E0 D1 77 E5 9A 13 78 2B F1 89 08 D0
   00010:   AB 6B 59 EE 92 49 05 B3 AB C7 A4 E3 69 65 76 C3

   Plaintext block P_3:
   00000:   11 22 33 44 55 66 77 88 99 AA BB CC EE FF 0A 00

   Encrypted block E_{K^2}(C_2):
   00000:   95 45 5F DB C3 9E 0A 13 9F CB 10 F5 BD 79 A3 88

   Output block C_3 = E_{K^2}(C_2) (xor) P_3:
   00000:   84 67 6C 9F 96 F8 7D 9B 06 61 AB 39 53 86 A9 88

   Plaintext block P_4:
   00000:   22 33 44 55 66 77 88 99 AA BB CC EE FF 0A 00 11



Smyshlyaev              Expires September 1, 2018              [Page 62]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   Encrypted block E_{K^2}(C_3):
   00000:   E0 AA 32 5D 80 A4 47 95 BA 42 BF 63 F8 4A C8 B2

   Output block C_4 = E_{K^2}(C_3) (xor) P_4:
   00000:   C2 99 76 08 E6 D3 CF 0C 10 F9 73 8D 07 40 C8 A3

   Section_3

   K^3:
   00000:   E8 76 2B 30 8B 08 EB CE 3E 93 9A C2 C0 3E 76 D4
   00010:   60 9A AB D9 15 33 13 D3 CF D3 94 E7 75 DF 3A 94

   Plaintext block P_5:
   00000:   33 44 55 66 77 88 99 AA BB CC EE FF 0A 00 11 22

   Encrypted block E_{K^3}(C_4):
   00000:   FE 42 8C 70 C2 51 CE 13 36 C1 BF 44 F8 49 66 89

   Output block C_5 = E_{K^3}(C_4) (xor) P_5:
   00000:   CD 06 D9 16 B5 D9 57 B9 8D 0D 51 BB F2 49 77 AB

   Plaintext block P_6:
   00000:   44 55 66 77 88 99 AA BB CC EE FF 0A 00 11 22 33

   Encrypted block E_{K^3}(C_5):
   00000:   01 24 80 87 86 18 A5 43 11 0A CC B5 0A E5 02 A3

   Output block C_6 = E_{K^3}(C_5) (xor) P_6:
   00000:   45 71 E6 F0 0E 81 0F F8 DD E4 33 BF 0A F4 20 90

   Section_4

   K^4:
   00000:   F2 EE 91 45 6B DC 3D E4 91 2C 87 C3 29 CF 31 A9
   00010:   2F 20 2E 5A C4 9A 2A 65 31 33 D6 74 8C 4F F9 12

   Plaintext block P_7:
   00000:   55 66 77 88 99 AA BB CC

   Encrypted block MSB_{|P_7|}(E_{K^4}(C_6)):
   00000:   97 5C 96 37 55 1E 8C 7F

   Output block C_7 = MSB_{|P_7|}(E_{K^4}(C_6)) (xor) P_7
   00000:   C2 3A E1 BF CC B4 37 B3

   Cipher text C:
   00000:   0D 1B AE 1D AD 3B E6 91 56 3C CF 53 D8 BF 09 8B
   00010:   6B B3 E7 71 16 3C A0 7C 9D 8D AC 3C 5C A8 09 24



Smyshlyaev              Expires September 1, 2018              [Page 63]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   00020:   84 67 6C 9F 96 F8 7D 9B 06 61 AB 39 53 86 A9 88
   00030:   C2 99 76 08 E6 D3 CF 0C 10 F9 73 8D 07 40 C8 A3
   00040:   CD 06 D9 16 B5 D9 57 B9 8D 0D 51 BB F2 49 77 AB
   00050:   45 71 E6 F0 0E 81 0F F8 DD E4 33 BF 0A F4 20 90
   00060:   C2 3A E1 BF CC B4 37 B3




   OMAC-ACPKM-Master mode with AES-256
   ***********************************
   k = 256
   n = 128
   c for the CTR-ACPKM mode = 64
   N = 256
   T* = 768

   Initial key K:
   00000:   88 99 AA BB CC DD EE FF 00 11 22 33 44 55 66 77
   00010:   FE DC BA 98 76 54 32 10 01 23 45 67 89 AB CD EF

   Plaintext M:
   00000:   11 22 33 44 55 66 77 00 FF EE DD CC BB AA 99 88
   00010:   00 11 22 33 44 55 66 77 88 99 AA BB CC EE FF 0A
   00020:   11 22 33 44 55 66 77 88 99 AA BB CC EE FF 0A 00
   00030:   22 33 44 55 66 77 88 99 AA BB CC EE FF 0A 00 11
   00040:   33 44 55 66 77 88 99 AA BB CC EE FF 0A 00 11 22

   K^1 | K^1_1 | K^2 | K^2_1 | K^3 | K^3_1:
   00000:   9F 10 BB F1 3A 79 FB BD 4A 4C A8 64 C4 90 74 64
   00010:   39 FE 50 6D 4B 86 9B 21 03 A3 B6 A4 79 28 3C 60
   00020:   77 91 17 50 E0 D1 77 E5 9A 13 78 2B F1 89 08 D0
   00030:   AB 6B 59 EE 92 49 05 B3 AB C7 A4 E3 69 65 76 C3
   00040:   9D CC 66 42 0D FF 45 5B 21 F3 93 F0 D4 D6 6E 67
   00050:   BB 1B 06 0B 87 66 6D 08 7A 9D A7 49 55 C3 5B 48
   00060:   F2 EE 91 45 6B DC 3D E4 91 2C 87 C3 29 CF 31 A9
   00070:   2F 20 2E 5A C4 9A 2A 65 31 33 D6 74 8C 4F F9 12
   00080:   78 21 C7 C7 6C BD 79 63 56 AC F8 8E 69 6A 00 07

   Section_1

   K^1:
   00000:   9F 10 BB F1 3A 79 FB BD 4A 4C A8 64 C4 90 74 64
   00010:   39 FE 50 6D 4B 86 9B 21 03 A3 B6 A4 79 28 3C 60

   K^1_1:
   00000:   77 91 17 50 E0 D1 77 E5 9A 13 78 2B F1 89 08 D0




Smyshlyaev              Expires September 1, 2018              [Page 64]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   Plaintext block M_1:
   00000:   11 22 33 44 55 66 77 00 FF EE DD CC BB AA 99 88

   Input block M_1 (xor) C_0:
   00000:   11 22 33 44 55 66 77 00 FF EE DD CC BB AA 99 88

   Output block C_1:
   00000:   0B A5 89 BF 55 C1 15 42 53 08 89 76 A0 FE 24 3E

   Plaintext block M_2:
   00000:   00 11 22 33 44 55 66 77 88 99 AA BB CC EE FF 0A

   Input block M_2 (xor) C_1:
   00000:   0B B4 AB 8C 11 94 73 35 DB 91 23 CD 6C 10 DB 34

   Output block C_2:
   00000:   1C 53 DD A3 6D DC E1 17 ED 1F 14 09 D8 6A F3 2C

   Section_2

   K^2:
   00000:   AB 6B 59 EE 92 49 05 B3 AB C7 A4 E3 69 65 76 C3
   00010:   9D CC 66 42 0D FF 45 5B 21 F3 93 F0 D4 D6 6E 67

   K^2_1:
   00000:   BB 1B 06 0B 87 66 6D 08 7A 9D A7 49 55 C3 5B 48

   Plaintext block M_3:
   00000:   11 22 33 44 55 66 77 88 99 AA BB CC EE FF 0A 00

   Input block M_3 (xor) C_2:
   00000:   0D 71 EE E7 38 BA 96 9F 74 B5 AF C5 36 95 F9 2C

   Output block C_3:
   00000:   4E D4 BC A6 CE 6D 6D 16 F8 63 85 13 E0 48 59 75

   Plaintext block M_4:
   00000:   22 33 44 55 66 77 88 99 AA BB CC EE FF 0A 00 11

   Input block M_4 (xor) C_3:
   00000:   6C E7 F8 F3 A8 1A E5 8F 52 D8 49 FD 1F 42 59 64

   Output block C_4:
   00000:   B6 83 E3 96 FD 30 CD 46 79 C1 8B 24 03 82 1D 81

   Section_3

   K^3:



Smyshlyaev              Expires September 1, 2018              [Page 65]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   00000:   F2 EE 91 45 6B DC 3D E4 91 2C 87 C3 29 CF 31 A9
   00010:   2F 20 2E 5A C4 9A 2A 65 31 33 D6 74 8C 4F F9 12

   K^3_1:
   00000:   78 21 C7 C7 6C BD 79 63 56 AC F8 8E 69 6A 00 07

   MSB1(K1) == 0 -> K2 = K1 << 1

   K1:
   00000:   78 21 C7 C7 6C BD 79 63 56 AC F8 8E 69 6A 00 07

   K2:
   00000:   F0 43 8F 8E D9 7A F2 C6 AD 59 F1 1C D2 D4 00 0E

   Plaintext M_5:
   00000:   33 44 55 66 77 88 99 AA BB CC EE FF 0A 00 11 22

   Using K1, padding is not required

   Input block M_5 (xor) C_4:
   00000:   FD E6 71 37 E6 05 2D 8F 94 A1 9D 55 60 E8 0C A4

   Output block C_5:
   00000:   B3 AD B8 92 18 32 05 4C 09 21 E7 B8 08 CF A0 B8

   Message authentication code T:
   00000:   B3 AD B8 92 18 32 05 4C 09 21 E7 B8 08 CF A0 B8



Appendix B.  Contributors

   o  Russ Housley
      Vigil Security, LLC
      housley@vigilsec.com

   o  Evgeny Alekseev
      CryptoPro
      alekseev@cryptopro.ru

   o  Ekaterina Smyshlyaeva
      CryptoPro
      ess@cryptopro.ru

   o  Shay Gueron
      University of Haifa, Israel
      Intel Corporation, Israel Development Center, Israel
      shay.gueron@gmail.com



Smyshlyaev              Expires September 1, 2018              [Page 66]


Internet-Draft   Re-keying Mechanisms for Symmetric Keys   February 2018


   o  Daniel Fox Franke
      Akamai Technologies
      dfoxfranke@gmail.com

   o  Lilia Ahmetzyanova
      CryptoPro
      lah@cryptopro.ru

Appendix C.  Acknowledgments

   We thank Mihir Bellare, Scott Fluhrer, Dorothy Cooley, Yoav Nir, Jim
   Schaad, Paul Hoffman, Dmitry Belyavsky and Yaron Sheffer for their
   useful comments.

Author's Address

   Stanislav Smyshlyaev (editor)
   CryptoPro
   18, Suschevsky val
   Moscow  127018
   Russian Federation

   Phone: +7 (495) 995-48-20
   Email: svs@cryptopro.ru



























Smyshlyaev              Expires September 1, 2018              [Page 67]


Html markup produced by rfcmarkup 1.126, available from https://tools.ietf.org/tools/rfcmarkup/